Skip to main content

How to Repair Stucco by DreamWorks Remodeling

By: Zexprwire

Newtown, PA, 26th January 2023, ZEXPRWIRE, Exteriors made with stucco offer several benefits. Insulating stucco can reduce the energy needed to heat and cool a house. If you take care of it, it may be fire resistant, minimize outside noise, and survive for decades. To maintain the structural integrity of your stucco siding, holes must be repaired as soon as they are discovered. With these hints, you can ensure that your stucco siding is a long-lasting component of the charm of your home.

Take off the Crumbling and Broken Stucco

Before repairing holes and cracking plaster, remove any loose stucco fragments. Remove all the damaged stucco, right down to the metal mesh that is protecting the lath below. To get rid of the dust and loose particles, scrub the surface with a wire brush.

Inspect Metal Mesh

Examine the metal mesh that was beneath the removed plaster for any corrosion or damage. You can apply your fresh stucco on it if it appears to be in good shape. Otherwise, clip the old mesh out of the way with metal snips. Install fresh metal mesh.

Use Stucco

Using a masonry trowel, cover the metal mesh with a layer of stucco. Use the edge of your trowel to score the surface with a series of X patterns after a few minutes. The subsequent coat will adhere better thanks to these scratch marks. To prevent drying out, cover the area with plastic sheeting and painter’s tape. Allow the layer to cure until it is sufficiently firm to withstand pressure from the application of the second coat and the leveling procedure without splitting.

Apply a further layer of stucco using the same procedure once the first coating has dried and another batch of stucco has been mixed.

If you require a stucco repair company in NJ turn to Dream Works.

Media Contacts

Name – DreamWorks Remodeling
E-mail –
Phone no – 855-953-7326
Company – DreamWorks Remodeling, llc

Data & News supplied by
Stock quotes supplied by Barchart
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the following
Privacy Policy and Terms and Conditions.