Skip to main content

Hecla Releases First Quarter Exploration Report

Exploration expenditure guidance increased $10 million

Hecla Mining Company (NYSE:HL) today released its Q1 2021 exploration results.

Highlights

  • Midas exploration at Green Racer Sinter intercepted high-grade gold and silver mineralization over a 1,000-foot strike length and a 1,250-foot dip extent in the Sinter Vein, as well as two new mineralized footwall structures. Significant intercepts include more than 5 oz/ton gold over 13 feet estimated true width (see Table A for full results). All are open for expansion.
  • Midas’ plan of operations amendment expands to allow greater access to multiple targets on the Green Racer Sinter and East Graben Corridor.
  • San Sebastian exploration drilling on the El Bronco Vein expanded mineralization over a strike length of 1,500 feet. While at the El Tigre Vein, vein textures indicate drilling was high in the epithermal system, warranting further deeper drilling.

“Our early exploration results, just two miles from the mine portal, validates our thesis that despite its long high-grade production history, there remains significant untouched potential at Midas,” said Phillips S. Baker, Jr., President and CEO. “The recent high-grade intercept grading 5.52 oz/ton gold and 8.9 oz/ton silver over 20.3 feet drilled (13.1 feet estimated true width) is one of the best exploration drillholes in North America in the past year.”

Baker continued, “But maybe more important than the grade and width of the discovery are the two additional mineralized structures in the footwall of the main structure and that significant mineralization continues over a strike of 1,000 feet and a dip length of 1,250 feet. All structures are open along strike and at depth.”

“At the end of April, we received the amended plan of operation allowing further access to drill not only at this new high-grade discovery but also to drill test targets on previously unpermitted ground. While it is very early days in our exploration at Midas, these successful results warrant expanding the number of drill rigs from two to possibly four by the end of the year,” Baker concluded.

Exploration expenditures were $6.0 million for the first quarter, an increase of $3.4 million compared to the first quarter of 2020 primarily due to increased activity and focus on the Green Racer Sinter discovery at Midas and the El Bronco and El Tigre vein discoveries at San Sebastian.

Exploration expenditures for 2021 are now expected to increase $10 million to about $40 million to reflect the increased drilling at Hecla’s properties.

Midas

At Midas, two core rigs focused on offsetting and expanding high-grade mineralization along strike and up and down dip at the Green Racer Sinter discovery made in the fourth Quarter of 2020. It is anticipated that a third core rig will arrive at Midas in July, and all three core rigs will focus on the Green Racer Sinter and other East Graben Corridor targets. (Figure 1).

A detailed surface mapping program identified an outcrop of spicular geyserite sinter, anomalous in gold, at the Green Racer Sinter target, 2 miles east of the main Midas Mine. Previously undrilled, Hecla’s drill program began in late 2020 and successfully hit significant mineralization in multiple intercepts, including 3.26 oz/ton over 3.9 feet estimated true thickness (see release dated 2/18/21 and previous drill results included in Table A below). The 2021 drill program is highlighted to date by 5.52 oz/ton gold and 8.9 oz/ton silver over 20.3 feet drilled (13.1 feet estimated true width) including 8.89 oz/ton gold and 14.5 oz/ton silver over 12.3 feet drilled (7.9 feet estimated true width) (Figure 2). Mineralization is hosted in quartz and carbonate veining within the Sinter structure which is locally fractured due to post-mineral fault movement. Although early in the exploration program, high-grade mineralization is defined over 1,000 feet of strike length and 1,250 feet of dip extent and is open along strike and down dip. Two additional mineralized structures (FW1 and FW2) have also been intersected in the footwall of the Sinter structure and both are open for expansion (Figure 2). Mineralization in these footwall structures is like the Sinter structure with results that include 0.71 oz/ton gold and 1.5 oz/ton silver over 2.0 feet drilled (1.7 feet estimated true width) in the FW1 structure and 2.93 oz/ton gold and 1.6 oz/ton silver over 2.5 feet drilled (1.8 feet estimated true width) in the FW2 structure.

Also at Midas, the amended exploration plan of operations was approved by the BLM in late April. This expanded exploration plan of operations allows exploration of the strike extensions of the Sinter and footwall structures as well as previously untested targets (Figure 3).

More complete drill assay highlights from Midas can be found in Table A at the end of this release and a presentation showing drill intersection locations is available at the following https://ir.hecla-mining.com/files/doc_presentations/2021/Hecla-Q12021-Exploration-Update.pdf.

San Sebastian

At San Sebastian, two core rigs focused on exploration drilling in the El Bronco and El Tigre veins (Figure 4) that were discovered in 2020 through our Short Vertical Reverse Circulation (SVRC) drilling program. The 2021 SVRC drilling program was completed in the first quarter within the Saladillo Valley using one reverse circulation drill rig. Core drilling in the El Bronco vein defines a wide zone of veining with 1,500 feet of strike length. Intercepts during the quarter include 0.12 oz/ton gold and 16.2 oz/ton silver over 28.7 feet true width and 0.10 oz/ton gold and 10.4 oz/ton silver over 17.6 feet true width including 0.15 oz/ton gold and 15.5 oz/ton silver over 11.0 feet true width (Figure 5). The El Bronco vein is a wide vein averaging 9.5 feet in true width with a maximum width of up to 37.7 feet true width which occurs at depth and to the west along strike. At the El Tigre vein, the most recent offset drilling of the high-grade intercepts has been low grade including 0.01 oz/ton gold and 2.0 oz/ton silver over 16.5 feet true width, but the drilling appears to be high in the epithermal system so deeper drilling is planned.

The San Sebastian SVRC drilling program over the last few years has been instrumental in discovering mineralized veins under cover of up to 60 feet of alluvial fill within the Saladillo Valley. Numerous anomalies have been identified with SVRC drilling that are untested with core drilling.

More complete drill assay highlights from San Sebastian can be found in Table A at the end of this release and a presentation showing drill intersection locations is available at the following https://ir.hecla-mining.com/files/doc_presentations/2021/Hecla-Q12021-Exploration-Update.pdf.

Greens Creek

At Greens Creek, two underground core rigs focused on definition drilling at the East Ore, Upper Plate, and 9A zones while exploration drilling began testing the southern extensions to the Gallagher Zone (Figure 6). Highlights from the East Ore Zone drilling include intercepts containing 28.5 oz/ton silver, 0.33 oz/ton gold, 10.5% zinc and 3.7% lead over 19.9 feet and 8.9 oz/ton silver, 0.18 oz/ton gold, 11.1% zinc and 2.9% lead over 34.5 feet, both located at the hinge zone between the sub-vertical and sub-horizontal portions of the East Zone. Highlights from the Upper Plate Zone include intercepts containing 34.4 oz/ton silver, 0.12 oz/ton gold, 9.5 % zinc and 4.4% lead over 23.1 feet and 37.9 oz/ton silver, 0.13 oz/ton gold, 6.2 % zinc and 3.1% lead over 25.8 feet. Highlights from the 9A results include 24.50 oz/ton silver, 0.17 oz/ton gold, 14.34 % zinc and 9.32% lead over 21.0 feet and 30.37 oz/ton silver, 0.27 oz/ton gold, 8.22 % zinc and 4.01% lead over 19.8 feet.

More complete drill assay highlights from Greens Creek can be found in Table A at the end of this release and a presentation showing drill intersection locations is available at the following https://ir.hecla-mining.com/files/doc_presentations/2021/Hecla-Q12021-Exploration-Update.pdf.

Casa Berardi

At Casa Berardi, five underground and two surface core rigs were focused on definition drilling in the proposed WMCP and Principal Pit areas as well as in the 118, 119, 123 zones and metallurgical and in-stope drilling (Figure 7). Drilling in the WMCP Pit targeted zones for metallurgical sampling and extensions above the current resource to expand mineralization higher in elevation to the bedrock-overburden contact. Highlights from this drilling include 0.03 oz/ton gold over 124.6 feet, 0.06 oz/ton gold over 92.2 feet and 0.05 oz/ton gold over 78.1 feet. Assay results from drilling in and near the 160 Pit from the 4th Quarter 2020 have been received confirming continuity of mineralization within the 160 Pit. Highlights from this drilling include 0.04 oz/ton gold over 38.7 feet, 0.08 oz/ton gold over 28.9 feet and 0.21 oz/ton gold over 16.1 feet including 0.90 oz/ton gold over 3.0 feet.

More complete drill assay highlights from Casa Berardi can be found in Table A at the end of this release and a presentation showing drill intersection locations is available at the following https://ir.hecla-mining.com/files/doc_presentations/2021/Hecla-Q12021-Exploration-Update.pdf.

Annual Meeting of Shareholders

For health and safety reasons due to COVID-19, Hecla’s Annual Meeting of Shareholders will be a virtual meeting and conducted via live webcast on Wednesday, May 19, 2021, at 1:00 p.m. ET. Shareholders, guests and interested parties may access the webcast on Hecla’s website at www.virtualshareholdermeeting.com/HL2021. During the meeting, Mr. Baker will highlight the Company’s Sustainability report and answer questions.

One-on-One Calls

Hecla will be holding a Virtual Investor Event on Wednesday, May 19, 2021, from 4 p.m. to 6 p.m. ET.

Hecla invites shareholders, investors, and other interested parties to schedule a personal, 30-minute virtual meeting (video or telephone) with a member of senior management. Click on the link below to schedule a call (You can also copy and paste the link into your web browser.). If you are unable to book a time, either due to high demand or for other reasons, please reach out to Russell Lawlar, Sr. Vice President – CFO and Treasurer at rlawlar@hecla-mining.com or 208-769-4130.

  1. Exploration: calendly.com/2021-may-vie
  2. ESG: calendly.com/2021-may-vie
  3. General: calendly.com/2021-may-vie

Cautionary Statements

Statements made which are not historical facts, such as strategies, plans, anticipated payments, litigation outcome (including settlement negotiations), production, sales of assets, exploration results and plans, costs, and prices or sales performance are "forward-looking statements" within the meaning of the Private Securities Litigation Reform Act of 1995. Words such as “may”, “will”, “should”, “expects”, “intends”, “projects”, “believes”, “estimates”, “targets”, “anticipates” and similar expressions are used to identify these forward-looking statements. Forward-looking statements involve a number of risks and uncertainties that could cause actual results to differ materially from those projected, anticipated, expected, or implied. These risks and uncertainties include, but are not limited to, metals price volatility, volatility of metals production and costs, environmental and litigation risks, operating risks, project development risks, political risks, labor issues, ability to raise financing and exploration risks and results. Refer to the company's Form 10-K and 10-Q reports for a more detailed discussion of factors that may impact expected future results. The company undertakes no obligation and has no intention of updating forward-looking statements other than as may be required by law.

Qualified Person (QP) Pursuant to Canadian National Instrument 43-101

Kurt D. Allen, MSc., CPG, Director - Exploration of Hecla Limited and Keith Blair, MSc., CPG, Chief Geologist of Hecla Limited, who serve as a Qualified Person under National Instrument 43-101("NI 43-101"), supervised the preparation of the scientific and technical information concerning Hecla’s mineral projects in this news release. Information regarding data verification, surveys and investigations, quality assurance program and quality control measures and a summary of analytical or testing procedures for the Greens Creek Mine are contained in a technical report titled “Technical Report for the Greens Creek Mine” effective date December 31, 2018, and for the Lucky Friday Mine are contained in a technical report titled “Technical Report for the Lucky Friday Mine Shoshone County, Idaho, USA” effective date April 2, 2014, for Casa Berardi are contained in a technical report titled "Technical Report on the mineral resource and mineral reserve estimate for Casa Berardi Mine, Northwestern Quebec, Canada" effective date December 31, 2018 (the "Casa Berardi Technical Report"), and for the San Sebastian Mine, Mexico, are contained in a technical report prepared for Hecla titled “Technical Report for the San Sebastian Ag-Au Property, Durango, Mexico” effective date September 8, 2015 . Also included in these four technical reports is a description of the key assumptions, parameters and methods used to estimate mineral reserves and resources and a general discussion of the extent to which the estimates may be affected by any known environmental, permitting, legal, title, taxation, socio-political, marketing, or other relevant factors. Information regarding data verification, surveys and investigations, quality assurance program and quality control measures and a summary of sample, analytical or testing procedures for the Fire Creek Mine are contained in a technical report prepared for Klondex Mines, dated March 31, 2018; the Hollister Mine dated May 31, 2017, amended August 9, 2017; and the Midas Mine dated August 31, 2014, amended April 2, 2015. Copies of these technical reports are available under Hecla's and Klondex's profiles on SEDAR at www.sedar.com. Mr. Allen and Mr. Blair reviewed and verified information regarding drill sampling, data verification of all digitally collected data, drill surveys and specific gravity determinations relating to all the mines. The review encompassed quality assurance programs and quality control measures including analytical or testing practice, chain-of-custody procedures, sample storage procedures and included independent sample collection and analysis. This review found the information and procedures meet industry standards and are adequate for Mineral Resource and Mineral Reserve estimation and mine planning purposes.

ABOUT HECLA

Founded in 1891, Hecla Mining Company (NYSE:HL) is the largest silver producer in the United States. In addition to operating mines in Alaska, Idaho and Quebec, Canada, the Company owns a number of exploration properties and pre-development projects in world-class silver and gold mining districts throughout North America.

Table A – Assay Results – Q1 2021

 

 

 

 

 

 

 

 

 

 

Midas (Nevada)

Zone

Drill Hole

Number

Drill Hole

Azm/Dip

Sample

From

(feet)

Sample

To

(feet)

Drilled

Width

(feet)

Est. True

Width

(feet)

Gold

(oz/ton)

Silver

(oz/ton)

Depth From

Surface

(feet)

Green Racer Sinter

DMC-00371

249/-45

735.0

736.6

1.6

1.2

1.12

16.9

-520

Sinter

DMC-00374

242/-59

1051.0

1055.3

4.3

3.3

0.34

7.8

-903

Sinter

DMC-00387

260/-45

858.0

859.0

1.0

0.4

0.21

20.7

-607

Sinter

DMC-00389

245/53

894.0

897.0

3.0

2.3

0.05

2.0

-714

Sinter

Including

894.0

894.8

0.8

0.6

0.05

4.2

-714

Sinter

DMC-00390

250/-50

1662.0

1666.5

4.5

3.9

3.26

14.3

-1267

Sinter

Including

1662.0

1663.0

1.0

0.9

1.38

16.7

-1267

Sinter

Including

1663.9

1664.9

1.0

0.9

10.68

37.6

-1267

Sinter

Including

1665.7

1666.5

0.8

0.7

3.16

4.0

-1267

Sinter

DMC-00395

265/-55

1756.5

1760.3

3.8

1.6

0.06

38.3

-1468

Sinter

Including

1756.5

1759.5

3.0

1.3

0.06

36.2

-1468

Sinter

Including

1759.5

1760.3

0.8

0.3

0.07

46.2

-1468

Sinter

DMC-00396

242/-49

1465.8

1466.6

0.8

0.8

0.22

20.0

-1090

Sinter

DMC-00399

213/-47

1689.3

1709.6

20.3

13.1

5.52

8.9

-1213

Sinter

Including

1694.0

1706.3

12.3

7.9

8.89

14.5

-1213

Sinter

DMC-00400

226/-47

1788.0

1788.5

0.5

0.4

0.00

0.6

-1267

Sinter

DMC-00401

241/-45

817.3

818.0

0.7

0.6

0.02

0.1

-578

Green Racer FW1

DMC-00390

250/-50

1083.2

1092.6

9.4

6.7

0.04

0.1

-838

FW1

DMC-00393

250/-54

1249.0

1251.0

2.0

1.7

0.71

1.5

-1015

Green Racer FW2

DMC-00398

225/-47

704.3

705.8

1.5

0.8

0.20

0.9

-505

FW2

DMC-00402

208/-52

490.0

492.5

2.5

1.8

2.93

1.6

-378

FW2

Including

490.0

490.8

0.8

0.6

2.30

2.2

-378

FW2

Including

490.8

491.5

0.7

0.5

6.30

2.5

-378

FW2

Including

491.5

492.5

1.0

0.7

1.07

0.6

-378

San Sebastian (Mexico)

Zone

Drill Hole

Number

Drill Hole

Azm/Dip

Sample

From (feet)

Sample

To (feet)

True Width

(feet)

Silver

(oz/ton)

Gold

(oz/ton)

Depth From

Surface (feet)

El Bronco Vein

SS-2087

35/-60

892.4

913.5

13.5

3.4

0.02

759

El Bronco Vein

SS-2089

35/-57

855.5

896.9

28.7

16.2

0.12

713

El Bronco Vein

SS-2094

35/-60

786.4

840.7

37.7

0.5

0.00

680

El Bronco Vein

SS-2096

35/-60

807.8

836.4

17.6

10.4

0.10

697

El Bronco Vein

Including

809.6

827.5

11.0

15.5

0.15

694

El Bronco Vein

SS-2098

35/-60

1461.1

1486.0

18.2

0.7

0.00

1261

El Bronco Vein

SS-2099

35/-60

1024.1

1055.2

21.6

0.8

0.00

877

El Bronco Vein

SS-2101

35/-63

983.1

1027.1

26.5

0.8

0.00

874

El Tigre Vein

SS-2083

45/-60

1610.6

1616.7

4.3

1.0

0.01

1377

El Tigre Vein

SS-2092

45/-55

703.7

722.1

16.5

2.0

0.01

565

El Tigre Vein

SS-2093

45/-60

1446.4

1475.6

20.3

0.4

0.01

1253

Greens Creek (Alaska)

Zone

Drill Hole

Number

Drill Hole

Azm/Dip

Sample

From (feet)

Sample

To (feet)

True

Width

(feet)

Silver

(oz/ton)

Gold

(oz/ton)

Zinc

(%)

Lead

(%)

Depth From

Mine Portal

(feet)

East Ore

GC5470

63/-77

476.0

511.5

34.3

20.5

0.19

17.8

3.0

182

East Ore

GC5471

243/-85

468.0

473.2

5.2

14.2

0.41

23.2

6.6

206

East Ore

GC5473

243/-67

449.1

456.5

6.8

14.6

0.24

21.5

5.8

240

East Ore

GC5478

63/-13

277.0

282.0

4.7

9.5

0.09

5.6

2.2

588

East Ore

GC5480

243/-67

432.0

435.0

3.0

5.8

0.05

22.4

6.9

250

East Ore

GC5482

243/-61

380.5

385.8

5.3

10.3

0.09

17.6

4.6

320

East Ore

GC5482

243/-61

420.8

422.2

1.4

28.0

0.02

15.7

4.0

286

East Ore

GC5486

231/-56

398.5

402.0

3.0

6.0

0.04

20.3

6.6

319

East Ore

GC5489

70/7

423.0

425.9

2.2

9.2

0.04

10.3

4.4

694

East Ore

GC5491

63/-79

434.0

454.0

19.9

28.5

0.33

10.5

3.7

212

East Ore

GC5493

63/-8

374.0

380.0

5.3

8.6

0.06

16.8

4.1

591

East Ore

GC5508

52/-80

459.0

493.5

34.5

8.9

0.18

11.1

2.9

186

East Ore

GC5510

64/-63

403.8

408.0

3.7

17.9

0.14

17.1

6.0

296

Upper Plate

GC5469

243/84

98.2

101.2

3.0

54.7

0.15

11.3

5.4

114

Upper Plate

GC5469

243/84

123.8

147.0

23.1

34.4

0.12

9.5

4.4

147

Upper Plate

GC5469

243/84

254.0

266.5

12.0

9.0

0.03

9.2

3.1

274

Upper Plate

GC5472

243/59

95.0

102.0

5.5

52.8

0.35

5.7

3.2

93

Upper Plate

GC5472

243/59

125.0

143.5

14.6

55.5

0.05

15.5

6.9

130

Upper Plate

GC5472

243/59

156.7

162.0

4.2

23.1

0.02

16.3

7.7

146

Upper Plate

GC5474

243/46

164.0

175.4

8.3

48.2

1.05

8.3

3.2

129

Upper Plate

GC5477

63/63

143.0

154.0

10.8

29.5

0.04

7.3

3.8

140

Upper Plate

GC5483

63/59

104.5

130.5

25.8

37.9

0.13

6.2

3.1

111

Upper Plate

GC5487

243/88

74.0

89.3

15.2

16.7

0.06

15.9

7.7

91

Upper Plate

GC5487

243/88

213.0

221.0

8.0

16.5

0.05

5.5

1.7

228

Upper Plate

GC5487

243/88

228.0

232.5

4.5

10.7

0.03

13.6

3.7

241

Upper Plate

GC5492

63/74

94.7

98.0

3.3

13.8

0.11

4.4

2.6

100

Upper Plate

GC5492

63/74

164.0

167.0

3.0

7.4

0.03

9.6

4.0

167

Upper Plate

GC5492

63/74

175.0

177.0

2.0

18.9

0.04

5.1

2.1

178

Upper Plate

GC5492

63/74

189.5

198.0

8.4

39.7

0.02

13.1

3.9

193

Upper Plate

GC5496

63/89

115.5

119.6

4.1

60.6

0.15

2.1

0.9

135

Upper Plate

GC5496

63/89

146.7

149.0

2.3

12.0

0.02

15.3

6.4

166

Upper Plate

GC5499

243/70

142.7

146.8

4.0

23.5

0.02

6.7

4.0

155

9A

GC5495

79/-15

340.2

344.8

4.6

6.4

0.02

13.4

5.0

-5

9A

GC5495

79/-15

378.5

381.5

2.9

9.4

0.12

15.3

5.0

-18

9A

GC5495

79/-15

416.1

419.0

2.9

22.7

0.02

8.7

0.5

-33

9A

GC5495

79/-15

480.0

483.5

3.3

9.6

0.04

7.2

4.6

-50

9A

GC5498

79/-22

3322.0

335.5

13.5

8.8

0.19

8.8

3.9

-37

9A

GC5498

79/-22

356.7

380.2

15.4

2.7

0.01

9.5

8.2

-52

9A

GC5502

63/-50

318.0

354.0

32.6

7.0

0.05

9.2

4.7

-171

9A

GC5505

63/-49

284.6

306.8

21.0

24.5

0.17

14.3

9.3

-138

9A

GC5505

63/-49

292.5

306.8

10.5

19.4

0.02

13.0

7.2

-147

9A

GC5507

64/-44

345.0

365.2

19.8

30.4

0.27

8.2

4.0

-152

9A

GC5509

63/-58

341.0

350.0

9.0

19.9

0.13

2.3

1.3

-197 

Casa Berardi (Quebec)

Zone

Drill Hole

Number

Drill

Hole

Section

Drill Hole

Azm/Dip

Sample

From

(feet)

Sample

To

(feet)

True

Width

(feet)

Gold

(oz/ton)

Depth

From Mine

Surface

(feet)

Surface WMCP 105 Zone

CBF-105-036

10680

360/-50

707.8

777.4

55.1

0.08

-601

105

Including

360/-50

742.6

762.6

16.1

0.17

-609

105

CBF-105-043

10470

360/-48

516.6

693.7

124.6

0.03

-471

105

CBF-105-045

10625

20/-67

617.0

662.2

15.4

0.03

-613

105

CBF-105-045

10625

20/-67

703.2

744.6

14.1

0.05

-691

105

CBF-105-048

10785

8/-45

396.9

414.3

10.2

0.05

-311

105

CBF-105-048

10785

8/-45

511.7

531.4

13.4

0.03

-394

105

CBF-105-049

10525

180/-57

254.9

270.6

9.2

0.06

-238

105

CBF-105-049

10525

180/-57

664.2

702.6

22.3

0.04

-575

105

CBF-105-050

10525

180/-55

321.4

392.9

54.4

0.01

-313

105

CBF-105-055

10860

182/-45

326.0

381.8

40.0

0.06

-257

105

Including

182/-45

334.6

354.2

14.1

0.13

-250

105

CBF-105-055

10860

182/-45

708.5

757.7

35.1

0.03

-522

105

CBF-105-057

10770

182/-49

693.7

826.6

92.2

0.06

-553

105

Including

182/-49

705.9

723.2

11.8

0.36

-520

105

CBF-105-058

10860

182/-47

422.5

516.6

78.1

0.05

-349

105

CBF-105-061

10890

182/-45

283.7

342.8

47.4

0.04

-226

105

CBF-105-067

10890

182/-63

349.3

437.9

44.0

0.07

-355

UG Lower 123 Zone

CBP-0887

12362

354/-39

267.3

284.0

16.1

0.17

-3661

123

Including

354/-39

280.8

284.0

3.1

0.36

-3665

UG Upper 123 Zone

CBP-0932

12255

197/50

311.6

326.0

11.5

0.19

-1548

123

CBP-0932

12255

197/50

364.1

436.2

54.1

0.10

-1503

123

CBP-0933

12278

203/38

179.1

196.8

11.3

0.09

-1650

123

Including

203/38

191.2

193.8

1.7

0.40

-1647

123

CBP-0934

12240

203/-26

250.9

264.7

11.8

0.08

-1867

123

CBP-0937

12270

186.5/36.5

275.5

288.6

10.8

0.10

-1611

123

CBP-0940

12225

216/55

439.5

518.2

62.0

0.12

-1401

Surface Principal Pit 124 Zone

CBF-124-001

12300

3/-45

255.8

324.7

46.7

0.10

-201

124

CBF-124-001

12300

3/-45

462.5

496.9

23.6

0.13

-336

124

CBF-124-003

12420

360/-46

411.6

477.2

42.4

0.09

-317

Surface East Mine 160 Zone

CBF-160-114

15855

360/-47

831.5

872.5

28.9

0.08

-632

160

CBF-160-116

15840

360/-47

213.2

246.0

27.9

0.08

-203

160

Including

360/-47

225.2

227.3

1.5

0.56

-200

160

CBF-160-123

15660

360/-45

168.9

196.8

19.7

0.27

-140

160

Including

360/-45

179.4

191.9

8.9

0.48

-138

160

CBF-160-139

16050

360/-57

88.6

109.6

11.5

0.15

-94

160

CBF-160-139

16050

360/-57

674.0

695.4

21.3

0.07

-569

160

CBF-160-148

15810

360/-47

216.5

241.1

16.1

0.21

-199

160

Including

360/-47

226.3

231.2

3.0

0.90

-199

160

CBF-160-152

15795

360/-47

792.1

851.2

45.3

0.04

-585

160

CBF-160-152

15795

360/-47

910.2

960.1

38.7

0.04

-657

160

CBF-160-152

15795

360/-47

994.8

1008.3

10.2

0.30

-699

160

Including

360/-47

1006.0

1008.3

2.0

0.44

-715

Category: Press Release

Contacts

Data & News supplied by www.cloudquote.io
Stock quotes supplied by Barchart
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the following
Privacy Policy and Terms and Conditions.