UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 10-K

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended September 30, 2005

Commission file number: 000-50499

MINDSPEED TECHNOLOGIES, INC.

(Exact name of registrant as specified in its charter)

Registrant’s telephone number, including area code:

(949) 579-3000

Securities registered pursuant to Section 12(b) of the Act:

None.

Securities registered pursuant to Section 12(g) of the Act:

Common Stock, $0.01 par value per share

(including associated Preferred Share Purchase Rights)

     Indicate by check mark whether the Registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes þ     No o

      Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of Registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. þ

      Indicate by check mark whether the Registrant is an accelerated filer (as defined in Rule 12b-2 of the Exchange Act). Yes þ     No o

      Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o     No þ          

      The aggregate market value of the Registrant’s voting and non-voting stock held by non-affiliates of the Registrant as of the end of its most recently completed second fiscal quarter was approximately $190.5 million. Shares held by each officer and director and each person owning more than 5% of the outstanding voting and non-voting stock have been excluded from this calculation because such persons may be deemed to be affiliates of the Registrant. This determination of potential affiliate status is not necessarily a conclusive determination for other purposes. Shares held include shares of which certain of such persons disclaim beneficial ownership.

      The number of outstanding shares of the Registrant’s Common Stock as of October 28, 2005 was 106,030,117.

Documents Incorporated by Reference

      Portions of the Registrant’s Proxy Statement for the 2006 Annual Meeting of Stockholders, to be filed pursuant to Regulation 14A within 120 days after the end of the 2005 fiscal year, are incorporated by reference into Part III of this Form 10-K.

FORWARD-LOOKING STATEMENTS

      This Annual Report on Form 10-K contains statements relating to Mindspeed Technologies, Inc. (including certain projections and business trends) that are “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933, as amended (the Securities Act), and Section 21E of the Securities Exchange Act of 1934, as amended (the Exchange Act), and are subject to the “safe harbor” created by those sections. All statements included in this Annual Report on Form 10-K, other than those that are purely historical, are forward-looking statements. Words such as “expect,” “believe,” “anticipate,” “outlook,” “could,” “target,” “project,” “intend,” “plan,” “seek,” “estimate,” “should,” “may,” “assume” and “continue,” as well as variations of such words and similar expressions, also identify forward-looking statements. Forward-looking statements in this Annual Report on Form 10-K include, without limitation, statements regarding:

      Our expectations, beliefs, anticipations, objectives, intentions, plans and strategies regarding the future are not guarantees of future performance and are subject to risks and uncertainties that could cause actual results, and actual events that occur, to differ materially from results contemplated by the forward-looking statement. These risks and uncertainties include, but are not limited to:

      The forward-looking statements in this Annual Report on Form 10-K are subject to additional risks and uncertainties, including those set forth in Item 1. “Business” under the heading “Risk Factors” and those detailed from time to time in our other filings with the Securities and Exchange Commission. These forward-looking statements are made only as of the date hereof and, except as required by law, we undertake no obligation to update or revise any of them, whether as a result of new information, future events or otherwise.

      Mindspeed® and Mindspeed Technologies® are registered trademarks of Mindspeed Technologies, Inc. Other brands, names and trademarks contained in this report are the property of their respective owners.

      For presentation purposes of this Annual Report on Form 10-K, references made to the years ended September 30, 2005, September 30, 2004 and September 30, 2003 relate to the actual fiscal years ended September 30, 2005, October 1, 2004 and October 3, 2003, respectively.

PART I

      Mindspeed Technologies, Inc. (we or Mindspeed) designs, develops and sells semiconductor networking solutions for communications applications in enterprise, access, metropolitan and wide-area networks. Our products, ranging from optical network transceiver solutions to voice and Internet protocol (IP) processors, are sold to original equipment manufacturers (OEMs) for use in a variety of network infrastructure equipment, including mixed media gateways, high-speed routers, switches, access multiplexers, cross-connect systems, digital loop carrier equipment, IP private branch exchanges (PBXs) and optical modules. Service providers and enterprises use this equipment for the processing, transmission and switching of high-speed voice, data and video traffic, including advanced services such as voice over Internet protocol (VoIP), within different segments of the communications network. Our customers include Alcatel Data Networks, S.A., Cisco Systems, Inc., McData Corporation, Nortel Networks, Inc. and Siemens A.G.

      We believe the breadth of our product portfolio, combined with more than three decades of experience in semiconductor hardware, software and communications systems engineering, provide us with a competitive advantage. We have proven expertise in signal, packet and transmission processing technologies, which are critical core competencies for successfully defining, designing and implementing advanced semiconductor products for next-generation network infrastructure equipment. We seek to cultivate close relationships with leading network infrastructure OEMs to understand emerging markets, technologies and standards. We focus our research and development efforts on applications in the segments of the telecommunications network which we believe offer the most attractive growth prospects. Our business is fabless, which means we outsource all of our manufacturing needs, and we do not own or operate any semiconductor manufacturing facilities. We believe being fabless allows us to minimize operating infrastructure and capital expenditures, maintain operational flexibility and focus our resources on the design, development and marketing of our products — the highest value-creation elements of our business model.

Spin-off from Conexant Systems, Inc.

      Mindspeed was originally incorporated in Delaware in 2001 as a wholly owned subsidiary of Conexant Systems, Inc. On June 27, 2003, Conexant completed the distribution to Conexant stockholders of all outstanding shares of common stock of Mindspeed (the distribution). In the distribution, each Conexant stockholder received one share of our common stock (including an associated preferred share purchase right) for every three shares of Conexant common stock held and cash for any fractional share of our common stock. Following the distribution, we began operations as an independent, publicly held company. Our common stock trades on the Nasdaq National Market under the ticker symbol “MSPD.”

      Prior to the distribution, Conexant transferred to us the assets and liabilities of its Mindspeed business, including the stock of certain subsidiaries, and certain other assets and liabilities which were allocated to us under the Distribution Agreement entered into between us and Conexant. Also prior to the distribution, Conexant contributed to us cash in an amount such that at the time of the distribution our cash balance was $100 million. We issued to Conexant a warrant to purchase 30 million shares of our common stock at a price of $3.408 per share, exercisable for a period of ten years after the distribution. In connection with the Distribution, we and Conexant also entered into a Credit Agreement, an Employee Matters Agreement, a Tax Allocation Agreement, a Transition Services Agreement and a Sublease.

Industry Overview

      Communications semiconductor products are a critical part of network infrastructure equipment. Network infrastructure OEMs require advanced communications semiconductor products — such as digital signal processors, transceivers, framers, packet and cell processors and switching solutions — that are highly optimized for the equipment employed by their customers. We seek to provide semiconductor products that enable network infrastructure OEMs to meet the needs of their service provider and enterprise customers in terms of system performance, functionality and time-to-market.

      Our semiconductor products are primarily focused on network infrastructure equipment applications in three segments of the broadly defined communications network: enterprise networks; network access service areas; and metropolitan area networks. The type and complexity of network infrastructure equipment used in these segments continues to expand, driven by the need for the processing, transmission and switching of digital voice, data and video traffic over multiple communication media, at numerous transmission data rates and employing different protocols. We also offer a limited number of products used in wide-area or long-haul networks.

      Enterprise networks include equipment that is deployed primarily in the offices of commercial enterprises for voice and data communications and access to outside networks. An enterprise network may be comprised of many local area networks, as well as client workstations, centralized database management systems, storage area networks and other components. In enterprise networks, communications semiconductors facilitate the processing and transmission of voice, data and video traffic in converged IP networks that are replacing the traditional separate telephone, data and video conferencing networks. Typical network infrastructure equipment found in enterprise networks that use our products include voice gateways, IP PBXs, storage area network (SAN) routers and director class switches. In addition, a major trend in the broadcast video market is the switch from analog to digital television transmission and the conversion from standard-definition television services to high-definition television (HDTV) services featuring more detailed images and digital surround sound. We offer a family of broadcast-video products optimized for high-speed HDTV routing and production switcher applications.

      Network Access service areas of the telecommunications network refer to the “last mile” of a telecommunications or cable service provider’s physical network (including copper, fiber optic or wireless transmission) and the network infrastructure equipment that connects end-users, typically located at a business or residence, with metropolitan area and wide-area networks. For this portion of the network, infrastructure equipment requires semiconductors that enable reliable, high-speed connectivity capable of aggregating or disaggregating and transporting multiple forms of voice, data and video traffic. In addition, communications semiconductors must accommodate multiple transmission standards and communications protocols to provide a bridge between dissimilar access networks, for example, connecting wireless base station equipment to a wireline network. Typical network infrastructure equipment found at the edge of the network access service area that use our products include remote access concentrators, digital subscriber line (DSL) access multiplexers, mixed-media gateways, wireless base stations, digital loop carrier equipment and optical line termination and media converters.

      Metropolitan Area Networks, or metro, service areas of the telecommunications network refer to the portion of a service provider’s physical network that enables high-speed communications within a city or a larger regional area. In addition, it provides the communications link between network access service areas and the fiber optic-based, wide-area network. For metro equipment applications, communications semiconductors provide transmission and processing capabilities, as well as information segmentation and classification, and routing and switching functionality, to support high-speed traffic from multiple sources employing different transmission standards and communications protocols. These functions require signal conversion, signal processing and packet processing expertise to support the design and development of highly integrated mixed-signal devices combining analog and digital functions with communications protocols and application software. Typical network infrastructure equipment found in metro service areas that use our products include add-drop multiplexers, switches, high-speed routers, digital cross-connect systems, optical edge devices and multiservice provisioning platforms.

      The telecommunications network, including the Internet, has evolved into a complex, hybrid series of digital and optical networks that connect individuals and businesses globally. These new larger bandwidth, data-centric networks integrate voice, data and video traffic, operate over both wired and wireless media, link existing voice and data networks and cross traditional enterprise, network access, metro and long haul service area boundaries. Network infrastructure OEMs are designing faster, more intelligent and more complex equipment to satisfy the needs of the service providers as they continue to expand their network coverage and

service offerings while upgrading and connecting or integrating existing networks of disparate types. In this demanding environment, we believe network infrastructure OEMs select as their strategic partners communications semiconductor suppliers who can deliver advanced products that provide increased functionality, lower total system cost and support for a variety of communications media, operating speeds and protocols.

      We believe the breadth of our product portfolio, combined with our expertise in semiconductor hardware, software and communications systems engineering, provide us with a competitive advantage in designing and selling our products to leading network infrastructure OEMs.

      We have proven expertise in signal, packet and transmission processing technologies. Signal processing involves both signal conversion and digital signal processing techniques that convert and compress voice, data and video between analog and digital representations. Packet processing involves bundling or segmenting information traffic using standard protocols such as IP or asynchronous transfer mode (ATM) and enables sharing of transmission bandwidth across a given communication medium. Transmission processing involves the transport and receipt of voice, data and video traffic across copper wire and optical fiber communications media.

      These core technology competencies are critical for developing semiconductor networking solutions that enable the processing, transmission and switching of high-speed voice, data and video traffic, employing multiple communications protocols, across disparate communications networks. Our core technology competencies are the foundation for developing our:

      We believe the software drivers and application software are an increasingly important part of the semiconductor networking solutions we offer to OEMs.

      We believe the market for network infrastructure equipment in general, and for communications semiconductors in particular, offers attractive long-term growth prospects for several reasons:

      Moreover, we expect that network infrastructure OEMs will outsource more of their semiconductor component requirements to semiconductor suppliers, allowing the OEMs to reduce their operating cost

structure by shifting their focus and investment from internal application specific integrated circuit (ASIC) semiconductor design and development to more strategic systems development.

Strategy

      Our objective is to grow our business and to become the leading supplier of semiconductor networking solutions to leading global network infrastructure OEMs in key enterprise, network access and metro service area market segments. To achieve this objective, we are pursuing the following strategies:

      We have established strong market positions for our products in the enterprise, network access and metro service areas of the telecommunications network. We believe the markets for semiconductor products that address these applications will grow at faster rates than the markets for network infrastructure equipment in general. In addition, products which address applications in the enterprise, network access and metro service areas and perform packet processing, transmission processing and/or signal processing functions typically command higher average selling prices and higher margins, primarily due to their functional complexity and their software content. These two key attributes are expected to make the enterprise, network access and metro service areas the most attractive market segments for the foreseeable future. We believe that our three core technology competencies, coupled with focused investments in product development, will position us to increase our share in those target areas.

      We identify and selectively establish strategic relationships with market leaders in the network infrastructure equipment industry to develop next-generation products and, in some cases, customized solutions for their specific needs. We have an extensive history of working closely with our customers’ research and development and marketing teams to understand emerging markets, technologies and standards, and we invest our product development resources in those areas. We believe our close relationships with leading network infrastructure OEMs facilitate early adoption of our semiconductor products during development of their system-level products, enhance our ability to obtain design wins from those customers and encourage adoption of our technology throughout the industry.

      In North America, we have cultivated close relationships with leading network infrastructure OEMs, including Cisco Systems, Inc., McData Corporation and Nortel Networks, Inc. Abroad, we have established close relationships with market leaders such as Huawei Technologies Co., Ltd., Mitsubishi Electric Corporation, TrueLight Corporation and Zhongxing Telecom Equipment Corp. (ZTE) in the Asia-Pacific region and Alcatel Data Networks, S.A., Nokia Corporation and Siemens A.G. in Europe.

      We build on the breadth of our product portfolio of physical-layer devices, together with our signal and packet processing devices and communications software expertise, to increase our share of the silicon content in our customers’ products. We offer a range of complementary products that are optimized to work with each other and provide our customers with complete information receipt, processing and transmission functions. These complementary products allow infrastructure OEMs to source components that provide proven interoperability from a single semiconductor supplier, rather than requiring OEMs to combine and coordinate individual components from multiple vendors. In addition, we offer highly integrated products such as our family of Comcerto^tm VoIP processor solutions that provide our customers with a complete hardware and software solution in a single device. These integrated products perform functions typically requiring multiple discrete components and software. We believe that this strategy of offering both complementary and integrated products increases product performance, speeds time-to-market and lowers the total system cost for our customers.

      The breadth of our product portfolio also provides a competitive advantage for serving network convergence applications such as multiprotocol wireless-to-wireline connectivity. These applications generally require a combination of processing, transmission or switching functionality to move high-speed voice and data traffic using multiple communications protocols across disparate communications networks.

      We provide broad-based technical and product design support to our customers through three dedicated teams: field application engineers; product application engineers; and technical marketing personnel. We believe that comprehensive service and support are critical to shortening our customers’ design cycles and maintaining a long-term competitive position within the network infrastructure equipment market. Outstanding customer service and support are important competitive factors for semiconductor component suppliers like us seeking to be the preferred suppliers to leading network infrastructure OEMs .

Products

      We provide network infrastructure OEMs with a broad portfolio of advanced semiconductor networking solutions, ranging from physical-layer transceivers and framers to higher-layer network processors. Our products can be classified into three focused product families: high-performance analog products; multiservice access digital signal processor (DSP) products; and wide-area networking (WAN) communications products. These three product families are found in a variety of networking equipment designed to process, transmit and switch voice, data and video traffic between, and within, the different segments of the communications network.

      Our high-performance analog transmission devices and switching products support storage area networking, fiber-to-the-premise and broadcast video, as well as mainstream synchronous optical networking (SONET)/synchronous digital hierarchy (SDH) and packet-over-SONET applications, typically operating at data transmission rates between 155 megabits per second (Mbps) and 4.25 gigabits per second (Gbps). Our transmission products include laser drivers, transimpedance amplifiers, post amplifiers, clock and data recovery circuits, serializers/deserializers, video reclockers, cable drivers and line equalizers. These products serve as the connection between a fiber optic or coaxial cable component interface and the remainder of the electrical subsystem in various network equipment and perform a variety of functions, including:

      Our switching products include a family of high-speed crosspoint switches capable of switching traffic within various types of network switching equipment. These crosspoint switches direct, or transfer, a large number of high-speed data input streams, regardless of traffic type, to different connection trunks for rerouting the information to new destination points in the network. Crosspoint switches are often used to provide redundant traffic paths in networking equipment to protect against the loss of critical data from spurious network outages or failures that may occur from time-to-time. Target equipment applications for our switching products include add-drop multiplexers, high-density IP switches, storage-area routers and optical cross-connect systems. In addition, we offer crosspoint switches optimized for standard and high-definition broadcast video routing and production switching applications at rates up to 1.5 Gbps.

      Our software-configurable multiservice access DSP products serve as bridges for transporting voice, data and video between circuit-switched networks and packet-based networks. Our multiservice access DSP device architecture combines the performance of a digital-signal processor core with the flexibility of a microcontroller core to support our extensive suite of modulation techniques, echo cancellers, speech coders and communications protocols. These products process and translate voice, data and video signals and perform various management and reporting functions that help determine the appropriate amount of bandwidth required for transporting the signals to the next destination. They compress the signals to minimize bandwidth consumption and modify or add communications protocols to accommodate transport of the signals across a variety of different services and networks. Supported services include VoIP, voice-over-ATM (VoATM) and voice-over-DSL services, as well as wireline-to-wireless connectivity.

      Our Comcerto^tm family of voice-over-packet (VoP) communications processors includes a full range of pin-and software-compatible enterprise and carrier-class voice processing solutions that enable OEMs to provide scalable systems with customized features. The high-density members of this family, the Comcerto 600 and Comcerto 700 series processors and related software, provide a complete “system-on-a-chip” solution for carrier-class VoIP and VoATM applications. The Comcerto 600 is capable of handling more than 256 channels of both VoIP and VoATM traffic, while the Comcerto 700 supports more than 400 channels. Both are targeted for use in digital loop carriers and voice and media gateways designed to bridge wireless, wireline and enterprise networks.

      The Comcerto 500 and 800 series solutions are designed for enterprise voice and data processing applications. The Comcerto 500 series is a silicon “PBX-on-a-chip” which supports all required voice processing functionality for up to 64 channels, including encryption. The Comcerto 800 series enables a new class of “office-in-a-box” systems by combining a high-quality VoP subsystem with a high-performance routing and virtual private network (VPN) engine. The Comcerto 800 series integrates voice processing, packet processing and encryption functionality into a single device for the rapidly growing market for VoP enterprise networks. This product is targeted for use in enterprise voice gateways, IP PBXs and integrated access devices (IADs).

      Our WAN communications products include transmission solutions and high-performance ATM/multi-protocol label switching (MPLS) network processors that facilitate the aggregation, processing and transport of voice and data traffic over copper wire or fiber optic cable to access metropolitan and long-haul networks.

      Our T1/ E1, T3/ E3 and SONET carrier devices incorporate high-speed analog, digital and mixed-signal circuit technologies and include multi-port framers and line interface units (LIUs) or transceivers for 1.5 Mbps to 155 Mbps data transmission. Framers format data for transmission and extract data at reception, while LIUs condition signals for transmission and reception over multiple media. Our link-layer products include multi-channel, high-level data link channel (HDLC) communications controllers and multi-channel, inverse multiplexing over ATM (IMA) traffic controllers. The IMA protocol enables the aggregation of multiple T1 or DSL lines to deliver higher data rates using existing ATM infrastructure while the HDLC protocol is used for the packetization of data and the transfer of messaging and signaling information across the network. We also offer a family of symmetric DSL (SDSL) transceivers which enable service providers to deliver Internet access at data transmission rates of 1.5 Mbps to 4.6 Mbps in both directions over copper wire, supporting telecommuting and branch office functions in North America.

      Our high-performance ATM/ MPLS network processors are designed to offer advanced protocol translation and traffic management capabilities. Protocol translation occurs where different types of networks and protocols interconnect. Traffic management describes a collection of functions which are used to allocate optimally network bandwidth and allow service providers to provide differentiated services over their networks. Our software-programmable devices operate at data transmission rates from 1.5 Mbps to 2.5 Gbps. Our network processor devices address internetworking applications, including ATM segmentation and reassembly,

and a variety of traffic management functions, including traffic shaping, traffic policing and queue management, required by these applications.

      Our wide-area networking communications products are designed for use in a variety of equipment including digital loop carriers, DSL access multiplexers, add-drop multiplexers, switches, high-speed routers, digital cross-connect systems, optical edge devices, multiservice provisioning platforms, voice gateways and wireless base station controllers.

Customers

      We market and sell our semiconductor networking solutions directly to leading network infrastructure OEMs. We also sell our products indirectly through electronic component distributors and third-party electronic manufacturing service providers, which manufacture products incorporating our semiconductor networking solutions for OEMs. Sales to distributors accounted for approximately 47% of our revenues for fiscal 2005. For fiscal 2005, distributors Avnet, Inc. and Alltek Technology Corporation and manufacturing service providers Jabil Circuit, Inc. and Sanmina-SCI Corporation accounted for 16%, 12%, 14% and 11%, respectively, of our net revenues.

      Our top five direct OEM customers for fiscal year 2005 were Alcatel Data Networks, S.A., Fujitsu Limited, Huawei Technologies Co., Ltd., Nortel Networks, Inc. and Zhongxing Telecom Equipment Corp. (ZTE). While our direct sales to these customers accounted for a total of approximately 9% of our fiscal 2005 net revenues, we believe indirect sales to these same customers represent a significant additional portion of our net revenues. Including indirect sales, we believe that Cisco Systems, Inc. accounted for approximately 22% of our fiscal 2005 net revenues and that no other OEM customer accounted for 10% or more of our net revenues. We believe that our significant indirect network infrastructure OEM customers for fiscal year 2005 also included McData Corporation, Mitsubishi Electric Corporation, Siemens A.G. and TrueLight Corporation.

      Our customer base is widely dispersed geographically. Revenues derived from customers located in the Americas, Europe, and the Asia-Pacific region were 38%, 13% and 49%, respectively, of our total revenues for fiscal 2005. We believe a substantial portion of the products we sell to OEMs and third-party manufacturing service providers in the Asia-Pacific region is ultimately shipped to end-markets in the Americas and Europe. See Item 8. “Financial Statements and Supplementary Data,” including Note 2 and Note 14 of Notes to Consolidated Financial Statements for additional information on customers and geographic areas.

Sales, Marketing and Technical Support

      We have a worldwide sales, marketing and technical support organization comprised of 113 employees as of October 28, 2005, located in 6 domestic and 8 international sales locations. Our marketing, sales and field applications engineering teams, augmented by 16 electronic component distributors and 20 sales representative organizations, focus on marketing and selling semiconductor networking solutions to worldwide network infrastructure OEMs.

      We maintain close working relationships with our customers throughout their lengthy product development cycle. Our customers may need six months or longer to test and evaluate our products and an additional six months or longer to begin volume production of network infrastructure equipment that incorporates our products. During this process, we provide broad-based technical and product design support to our customers through our field application engineers, product application engineers and technical marketing personnel. We believe that providing comprehensive product service and support is critical to shortening our customers’ design cycles and maintaining a competitive position in the network infrastructure equipment market.

Operations and Manufacturing

      We are a fabless company, which means we do not own or operate foundries for wafer fabrication or facilities for device assembly and final test of our products. Instead, we outsource wafer fabrication, assembly and testing of our semiconductor products to independent, third-party contractors. We use mainstream digital

complementary metal-oxide semiconductor (CMOS) process technology for the majority of our products; we rely on specialty processes for the remainder of products. Taiwan Semiconductor Manufacturing Co., Ltd. (TSMC) is our principal foundry supplier of CMOS wafers and die. Our primary foundry supplier for specialty process requirements is Jazz Semiconductor, Inc. We use several other suppliers for wafers used in older products. We believe that the raw materials, parts and supplies required by our foundry suppliers are generally available at present and will be available in the foreseeable future.

      Semiconductor wafers are usually shipped to third-party contractors for device assembly and packaging where the wafers are cut into individual die, packaged and tested before final shipment to customers. We use Amkor Technology, Inc. and other third-party contractors, located in the Asia-Pacific region, Europe and California, to satisfy a variety of assembly and packaging technology and product testing requirements associated with the back-end portion of the manufacturing process.

      We qualify each of our foundry and back-end process providers. This qualification process consists of a detailed technical review of process performance, design rules, process models, tools and support, as well as analysis of the subcontractor’s quality system and manufacturing capability. We also participate in quality and reliability monitoring through each stage of the production cycle by reviewing electrical and parametric data from our wafer foundry and back-end providers. We closely monitor wafer foundry production for overall quality, reliability and yield levels.

Competition

      The communications semiconductor industry in general, and the markets in which we compete in particular, are intensely competitive. We compete worldwide with a number of U.S. and international suppliers that are both larger and smaller than us in terms of resources and market share. We expect intense competition to continue.

      Our principal competitors are Agere Systems, Inc., Analog Devices, Inc., Applied Micro Circuits Corporation, Centillium Communications, Inc., Conexant Systems, Inc., Gennum Corporation, Exar Corporation, Freescale Semiconductor, Inc., Infineon Technologies A.G., Integrated Device Technology, Inc., Maxim Integrated Products, Inc., PMC-Sierra, Inc., Texas Instruments Incorporated, Transwitch Corporation and Vitesse Semiconductor Corporation.

      We believe that the principal competitive factors for semiconductor suppliers in each of our served markets are:

      While we believe that we compete favorably with respect to each of these factors, many of our current and potential competitors have certain advantages over us, including:

      As a result, these competitors may be able to devote greater resources to the development, promotion and sale of their products than we can. Our competitors may also be able to adapt more quickly to new or emerging technologies and changes in customer requirements or may be more able to respond to the cyclical fluctuations or downturns that affect the semiconductor industry from time to time. Moreover, we have incurred substantial operating losses, and we anticipate future losses. If we are not successful in assuring our customers of our financial stability, our OEM customers may choose semiconductor suppliers whom they believe have a stronger financial position or liquidity, which may materially adversely affect our business.

Backlog

      Our sales are made primarily pursuant to standard purchase orders for delivery of products. Because industry practice allows customers to cancel orders with limited advance notice to us prior to shipment, we believe that backlog as of any particular date is not a reliable indicator of our future revenue levels.

Research and Development

      We have significant research, development, engineering and product design capabilities. As of October 28, 2005, we had 308 employees engaged in research and development activities. We perform research and product development activities at our headquarters in Newport Beach, California and at 4 design centers. Our design centers are strategically located to take advantage of key technical and engineering talent. Our success depends to a substantial degree upon our ability to develop and introduce in a timely fashion new products and enhancements to our existing products that meet changing customer requirements and emerging industry standards. We have made and plan to make substantial investments in research and development and to participate in the formulation of industry standards. In addition, we actively collaborate with technology leaders to define and develop next-generation technologies.

      We spent approximately $71.4 million, $79.6 million and $106.3 million on research and development activities in fiscal years 2005, 2004 and 2003, respectively. The decreases in our research and development expenses reflect the workforce reductions and other cost reduction actions we implemented in fiscal years 2002 through 2005.

Intellectual Property

      Our success and future revenue growth depend, in part, on the intellectual property that we own and develop, including patents, licenses, trade secrets, know-how, trademarks and copyrights, and on our ability to protect our intellectual property. We continuously review our patent portfolio to maximize its value to us, abandoning inapplicable or less useful patents and filing new patents important to our product roadmap. Our patent portfolio may be used to avoid, defend or settle any potential litigation with respect to various technologies contained in our products. The portfolio may also provide negotiating leverage in attempts to cross-license patents or technologies with third parties and it may provide licensing opportunities in the future. We rely primarily on patent, copyright, trademark and trade secret laws, as well as employee and third-party nondisclosure and confidentiality agreements and other methods to protect our proprietary technologies and processes. In connection with our participation in the development of various industry standards, we may be required to reasonably license certain of our patents to other parties, including competitors that develop products based upon the adopted industry standards. We have also entered into agreements with certain of our customers and granted these customers the right to use our proprietary technology in the event that we file for bankruptcy protection or take other equivalent actions. While in the aggregate our intellectual property is considered important to our operations, no single patent, license, trade secret, know-how, trademark or copyright is considered of such importance that its loss or termination would materially affect our business or financial condition.

Employees

      As of October 28, 2005, we had 524 full-time employees, of whom approximately 350 were engineers. Our employees are not covered by any collective bargaining agreements and we have not experienced a work

stoppage in the past five years. We believe our future success will depend in large part on our ability to continue to attract, motivate, develop and retain highly skilled and dedicated technical, marketing and management personnel.

Cyclicality

      The semiconductor industry is highly cyclical and is characterized by constant and rapid technological change, rapid product obsolescence and price erosion, evolving technical standards, short product life cycles and wide fluctuations in product supply and demand. From time to time these and other factors, together with changes in general economic conditions, cause significant upturns and downturns in the industry, and in our business in particular.

      In addition, our operating results are subject to substantial quarterly and annual fluctuations due to a number of factors, such as demand for network infrastructure equipment, the timing of receipt, reduction or cancellation of significant orders, fluctuations in the levels of component inventories held by our customers, the gain or loss of significant customers, market acceptance of our products and our customers’ products, our ability to develop, introduce and market new products and technologies on a timely basis, the availability and cost of products from our suppliers, new product and technology introductions by competitors, intellectual property disputes, and the timing and extent of product development costs.

Risk Factors

      Our business, financial condition and operating results can be affected by a number of factors, including those listed below, any one of which could cause our actual results to vary materially from recent results or from our anticipated future results. Any of these risks could also materially and adversely affect our business, financial condition or the price of our common stock or other securities.

      We incurred a net loss of $62.6 million for fiscal 2005 compared to net losses of $93.2 million in fiscal 2004 and $750.4 million ($177.3 million, before the $573.2 million cumulative effect of a change in accounting for goodwill) in fiscal 2003. We expect that we will continue to incur significant losses and negative cash flows at least through the first half of fiscal 2006, and we may incur additional significant losses and negative cash flows in subsequent periods.

      In order to become profitable, or to generate positive cash flows from operations, we must achieve substantial revenue growth. Our ability to achieve the necessary revenue growth will depend on increased demand for network infrastructure equipment that incorporates our products, which in turn depends primarily on the level of capital spending by communications service providers and enterprises. Through fiscal 2005, we have completed a series of cost reduction actions which have improved our operating cost structure. However, these expense reductions alone, without additional revenue growth, will not make us profitable. We may not be successful in achieving the necessary revenue growth or the expected expense reductions within the anticipated time frame, or at all. We may not achieve profitability or sustain such profitability, if achieved.

      For fiscal 2005, our net cash used in operating activities was $30.2 million compared to net cash used in operating activities of $43.2 million for fiscal 2004 and $125.6 million for fiscal 2003. Our principal sources of liquidity are our existing cash balances, marketable securities and cash generated from product sales. As of September 30, 2005, our cash and cash equivalents totaled $15.3 million and our marketable securities totaled $40.9 million. We believe that our existing sources of liquidity will be sufficient to fund our operations, research and development efforts, anticipated capital expenditures, working capital and other financing requirements for at least the next twelve months. However, we cannot assure you that this will be the case, and

if we continue to incur operating losses and negative cash flows in the future, we may need to reduce further our operating costs or obtain alternate sources of financing, or both. We may not have access to additional sources of capital on favorable terms or at all. If we raise additional funds through the issuance of equity, equity-based or debt securities, such securities may have rights, preferences or privileges senior to those of our common stock and our stockholders may experience dilution of their ownership interests.

      The semiconductor industry is highly cyclical and is characterized by constant and rapid technological change, rapid product obsolescence and price erosion, evolving technical standards, short product life cycles and wide fluctuations in product supply and demand. From time to time these and other factors, together with changes in general economic conditions, cause significant upturns and downturns in the industry in general, and in our business in particular. Periods of industry downturns have been characterized by diminished product demand, production overcapacity, high inventory levels and accelerated erosion of average selling prices. These factors have caused substantial fluctuations in our revenues and our results of operations in the past and we may experience similar fluctuations in our business in the future.

      Our revenues and operating results have fluctuated in the past and may fluctuate in the future. These fluctuations are due to a number of factors, many of which are beyond our control. These factors include, among others:

      The foregoing factors are difficult to forecast, and these, as well as other factors, could materially adversely affect our quarterly or annual operating results. If our operating results fail to meet the expectations of analysts or investors, they could materially and adversely affect the price of our common stock.

      We are entirely dependent upon outside wafer fabrication facilities, known as foundries, for wafer fabrication services. Our principal suppliers of wafer fabrication services are TSMC and Jazz. We are also dependent upon third parties, including Amkor, for the assembly and testing of all of our products. Under our

fabless business model, our long-term revenue growth is dependent on our ability to obtain sufficient external manufacturing capacity, including wafer production capacity. Periods of upturns in the semiconductor industry may be characterized by rapid increases in demand and a shortage of capacity for wafer fabrication and assembly and test services.

      The risks associated with our reliance on third parties for manufacturing services include:

      Our standard lead time, or the time required to manufacture our products (including wafer fabrication, assembly and testing) is typically 12 to 16 weeks. During periods of manufacturing capacity shortages, the foundries and other suppliers on whom we rely may devote their limited manufacturing capacity to fulfill the production requirements of other clients that are larger or better financed than we are, or who have superior contractual rights to enforce manufacture of their products, including to the exclusion of producing our products.

      Additionally, if we are required to seek alternative foundries or assembly and test service providers, we would be subject to longer lead times, indeterminate delivery schedules and increased manufacturing costs, including costs to find and qualify acceptable suppliers. For example, if we choose to use a new foundry, the qualification process may take as long as six months over the standard lead time before we can begin shipping products from the new foundry.

      Wafer fabrication processes are subject to obsolescence, and foundries may discontinue a wafer fabrication process used for certain of our products. In such event, we generally offer our customers a “last-time buy” program to satisfy their anticipated requirements for our products. The unanticipated discontinuation of a wafer fabrication process on which we rely may adversely affect our revenues and our customer relationships.

      The foundries and other suppliers on whom we rely may experience financial difficulties or suffer disruptions in their operations due to causes beyond our control, including labor strikes, work stoppages, electrical power outages, fire, earthquake, flooding or other natural disasters. Certain of our suppliers’ manufacturing facilities are located near major earthquake fault lines in the Asia-Pacific region and California. In the event of a disruption of the operations of one or more of our suppliers, we may not have an alternate source immediately available. Such an event could cause significant delays in shipments until we could shift the products from an affected facility or supplier to another facility or supplier. The manufacturing processes we rely on are specialized and are available from a limited number of suppliers. Alternate sources of manufacturing capacity, particularly wafer production capacity, may not be available to us on a timely basis. Even if alternate manufacturing capacity is available, we may not be able to obtain it on favorable terms, or at all. Difficulties or delays in securing an adequate supply of our products on favorable terms, or at all, could impair our ability to meet our customers’ requirements and have a material adverse effect on our operating results.

      In addition, the highly complex and technologically demanding nature of semiconductor manufacturing has caused foundries to experience, from time to time, lower than anticipated manufacturing yields, particularly in connection with the introduction of new products and the installation and start-up of new process technologies. Lower than anticipated manufacturing yields may affect our ability to fulfill our customers’ demands for our products on a timely basis. Moreover, lower than anticipated manufacturing yields may adversely affect our cost of goods sold and our results of operations.

      The communications semiconductor industry in general, and the markets in which we compete in particular, are intensely competitive. We compete worldwide with a number of U.S. and international semiconductor manufacturers that are both larger and smaller than we are in terms of resources and market share. We currently face significant competition in our markets and expect that intense price and product competition will continue. This competition has resulted, and is expected to continue to result, in declining average selling prices for our products.

      Many of our current and potential competitors have certain advantages over us, including:

      As a result, these competitors may be able to adapt more quickly to new or emerging technologies and changes in customer requirements or may be able to devote greater resources to the development, promotion and sale of their products than we can. Moreover, we have incurred substantial operating losses, and we anticipate future losses. We believe that financial stability of suppliers is an important consideration in our customers’ purchasing decisions. If our OEM customers perceive that we lack adequate financial stability, they may choose semiconductor suppliers whom they believe have a stronger financial position or liquidity.

      Current and potential competitors also have established or may establish financial or strategic relationships among themselves or with our existing or potential customers, resellers or other third parties. These relationships may affect customers’ purchasing decisions. Accordingly, it is possible that new competitors or alliances among competitors could emerge and rapidly acquire significant market share. We may not be able to compete successfully against current and potential competitors.

      Our operating results will depend largely on our ability to continue to introduce new and enhanced semiconductor products on a timely basis. Successful product development and introduction depends on numerous factors, including, among others:

      We may not have sufficient resources to make the substantial investment in research and development in order to develop and bring to market new and enhanced products, particularly if we are required to take further cost reduction actions. Furthermore, we are required to evaluate expenditures for planned product development continually and to choose among alternative technologies based on our expectations of future market growth. We may be unable to develop and introduce new or enhanced products in a timely manner, our products may not satisfy customer requirements or achieve market acceptance, or we may be unable to

anticipate new industry standards and technological changes. We also may not be able to respond successfully to new product announcements and introductions by competitors.

      Research and development projects may experience unanticipated delays related to our internal design efforts. New product development also requires the production of photomask sets and the production and testing of sample devices. In the event we experience delays in obtaining these services from the wafer fabrication and assembly and test vendors on whom we rely, our product introductions may be delayed and our revenues and results of operations may be adversely affected.

      The demand for our products can change quickly and in ways we may not anticipate because our markets generally exhibit the following characteristics:

      Our products could become obsolete sooner than we expect because of faster than anticipated, or unanticipated, changes in one or more of the technologies related to our products. The introduction of new technology representing a substantial advance over current technology could adversely affect demand for our existing products. Currently accepted industry standards are also subject to change, which may also contribute to the obsolescence of our products. If we are unable to develop and introduce new or enhanced products in a timely manner, our business may be adversely affected.

      Our sales are typically made pursuant to individual purchase orders and we generally do not have long-term supply arrangements with our customers. Generally, our customers may cancel orders until 30 days prior to shipment. In addition, we sell a substantial portion of our products through distributors, some of whom have a right to return unsold products to us. Sales to distributors accounted for approximately 47% of our net revenues for fiscal 2005.

      Because of the significant lead times for wafer fabrication and assembly and test services, we routinely purchase inventory based on estimates of end-market demand for our customers’ products, which may be subject to dramatic changes and is difficult to predict. This difficulty may be compounded when we sell to OEMs indirectly through distributors or contract manufacturers, or both, as our forecasts of demand are then based on estimates provided by multiple parties. In addition, our customers may change their inventory practices on short notice for any reason. The cancellation or deferral of product orders, the return of previously sold products or overproduction due to the failure of anticipated orders to materialize could result in our holding excess or obsolete inventory, which could result in write-downs of inventory. Conversely, if we fail to anticipate inventory needs we may be unable to fulfill demand for our products, resulting in a loss of potential revenue.

      Our products are not sold directly to the end-user but are components of other products. As a result, we rely on network infrastructure OEMs to select our products from among alternative offerings to be designed into their equipment. We may be unable to achieve these “design wins.” Without design wins from OEMs, we

would be unable to sell our products. Once an OEM designs another supplier’s semiconductors into one of its product platforms, it is more difficult for us to achieve future design wins with that OEM’s product platform because changing suppliers involves significant cost, time, effort and risk. Achieving a design win with a customer does not ensure that we will receive significant revenues from that customer and we may be unable to convert design wins into actual sales. Even after a design win, the customer is not obligated to purchase our products and can choose at any time to stop using our products if, for example, its own products are not commercially successful.

      Our customers generally need six months or longer to test and evaluate our products and an additional six months or more to begin volume production of equipment that incorporates our products. These lengthy periods also increase the possibility that a customer may decide to cancel or change product plans, which could reduce or eliminate sales to that customer. As a result of this lengthy sales cycle, we may incur significant research and development and selling, general and administrative expenses before we generate any revenues from new products. We may never generate the anticipated revenues if our customers cancel or change their product plans.

      The semiconductor industry is characterized by vigorous protection and pursuit of intellectual property rights. From time to time, third parties have asserted and may in the future assert patent, copyright, trademark and other intellectual property rights against technologies that are important to our business. The resolution or compromise of any litigation or other legal process to enforce such alleged third party rights, including claims arising through our contractual indemnification of our customers, or claims challenging the validity of our patents, regardless of its merit or resolution, could be costly and divert the efforts and attention of our management and technical personnel. We may not prevail in any such litigation or other legal process or we may compromise or settle such claims because of the complex technical issues and inherent uncertainties in intellectual property disputes and the significant expense in defending such claims. If litigation or other legal process results in adverse rulings we could be required to:

      In connection with the distribution, we generally assumed responsibility for all contingent liabilities and litigation against Conexant or its subsidiaries related to the Mindspeed business.

      We rely primarily on patent, copyright, trademark and trade secret laws, as well as employee and third-party nondisclosure and confidentiality agreements and other methods, to protect our proprietary technologies

and processes. We may be required to engage in litigation to enforce or protect our intellectual property rights, which may require us to expend significant resources and to divert the efforts and attention of our management from our business operations. In particular:

      Despite the preventive measures and precautions that we take, a third party could copy or otherwise obtain and use our technology without authorization, develop similar technology independently or design around our patents. In addition, effective patent, copyright, trademark and trade secret protection may be unavailable or limited in certain countries.

      Although we, our customers and our suppliers rigorously test our products, our products are complex and may contain errors, defects or bugs when first introduced or as new versions are released. We have in the past experienced, and may in the future experience, errors, defects and bugs. If any of our products contain production defects or reliability, quality or compatibility problems that are significant to our customers, our reputation may be damaged and customers may be reluctant to buy our products, which could adversely affect our ability to retain existing customers and attract new customers. In addition, these defects or bugs could interrupt or delay sales of affected products to our customers, which could adversely affect our results of operations.

      If defects or bugs are discovered after commencement of commercial production of a new product, we may be required to make significant expenditures of capital and other resources to resolve the problems. This could result in significant additional development costs and the diversion of technical and other resources from our other development efforts. We could also incur significant costs to repair or replace defective products and we could be subject to claims for damages by our customers or others against us. These costs or damages could have a material adverse effect on our financial condition and results of operations.

      Our future success depends on our ability to attract, retain and motivate qualified personnel, including executive officers and other key management and technical personnel. As the source of our technological and product innovations, our key technical personnel represent a significant asset. The competition for such personnel can be intense in the semiconductor industry. We may not be able to attract and retain qualified management and other personnel necessary for the design, development and sale of our products.

      In periods of poor operating performance, we have experienced, and may experience in the future, particular difficulty attracting and retaining key personnel. If we are not successful in assuring our employees of our financial stability and our prospects for success, our employees may seek other employment, which may materially adversely affect our business. Moreover, our recent expense reduction and restructuring initiatives, including a series of worldwide workforce reductions, have significantly reduced the number of our technical employees. The loss of the services of one or more of our key employees, including Raouf Y. Halim, our chief executive officer, or certain key design and technical personnel, or our inability to attract, retain and motivate qualified personnel could have a material adverse effect on our ability to operate our business.

      Approximately 10% of our engineers are foreign nationals working in the United States under visas. The visas held by many of our employees permit qualified foreign nationals working in specialty occupations, such as certain categories of engineers, to reside in the United States during their employment. The number of new visas approved each year may be limited and may restrict our ability to hire additional qualified technical

employees. In addition, immigration policies are subject to change, and these policies have generally become more stringent since the events of September 11, 2001. Any additional significant changes in immigration laws, rules or regulations may further restrict our ability to retain or hire technical personnel.

      For fiscal 2005, approximately 71% of our net revenues were from customers located outside the United States, primarily in the Asia-Pacific region and Europe. In addition, we have design centers, and rely on suppliers, located outside the United States, including foundries and assembly and test service providers located in the Asia-Pacific region. Our international sales and operations are subject to a number of risks inherent in selling and operating abroad which could adversely affect our ability to increase or maintain our foreign sales. These include, but are not limited to, risks regarding:

      Because most of our international sales, other than sales to Japan (which are denominated principally in Japanese yen), are currently denominated in U.S. dollars, our products could become less competitive in international markets if the value of the U.S. dollar increases relative to foreign currencies.

      From time to time we may enter into foreign currency forward exchange contracts to mitigate the risk of loss from currency exchange rate fluctuations for foreign currency commitments entered into in the ordinary course of business. We have not entered into foreign currency forward exchange contracts for other purposes. Our financial condition and results of operations could be adversely affected by currency fluctuations.

      We may from time to time make acquisitions, enter into alliances or make investments in other businesses to complement our existing product offerings, augment our market coverage or enhance our technological capabilities. However, any such transactions could result in:

      Integrating acquired organizations and their products and services may be expensive, time-consuming and a strain on our resources and our relationships with employees and customers, and ultimately may not be successful.

      Additionally, in periods subsequent to an acquisition, we must evaluate goodwill and acquisition-related intangible assets for impairment. When such assets are found to be impaired, they will be written down to estimated fair value, with a charge against earnings.

      The price of our common stock is volatile and may fluctuate significantly. There can be no assurance as to the prices at which our common stock will trade or that an active trading market in our common stock will be sustained in the future. The market price at which our common stock trades may be influenced by many factors, including:

      In addition, public stock markets have experienced, and may in the future experience, extreme price and trading volume volatility, particularly in the technology sectors of the market. This volatility has significantly affected the market prices of securities of many technology companies for reasons frequently unrelated to or disproportionately impacted by the operating performance of these companies. These broad market fluctuations may adversely affect the market price of our common stock. If our common stock trades below $1.00 for 30 consecutive trading days, or if we otherwise do not meet the requirements for continued quotation on the Nasdaq Stock Market, our common stock could be delisted, which would adversely affect the ability of investors to sell shares of our common stock and could otherwise adversely affect our business.

      Conexant holds a warrant to acquire 30 million shares of our common stock at a price of $3.408 per share, exercisable through June 27, 2013, representing approximately 17% of our outstanding common stock on a fully diluted basis. The warrant may be transferred or sold in whole or part at any time. If Conexant sells the warrant or if Conexant or a transferee of the warrant exercises the warrant and sells a substantial number of shares of our common stock in the future, or if investors perceive that these sales may occur, the market price of our common stock could decline or market demand for our common stock could be sharply reduced. As of September 30, 2005, we have $46.0 million principal amount of convertible senior notes outstanding. These notes are convertible at any time, at the option of the holder, into approximately 432.9004 shares of common stock per $1,000 principal amount of notes or an aggregate of approximately 19.9 million shares of our common stock. The conversion of the notes and subsequent sale of a substantial number of shares of our common stock could also adversely affect demand for, and the market price of, our common stock. Each of

these transactions could adversely affect our ability to raise additional financing by issuing equity or equity-based securities in the public capital markets.

      The warrant issued to Conexant contains antidilution provisions that provide for adjustment of the warrant’s exercise price, and the number of shares issuable under the warrant, upon the occurrence of certain events. If we issue, or are deemed to have issued, shares of our common stock, or securities convertible into our common stock, at prices below the current market price of our common stock (as defined in the warrant) at the time of the issuance of such securities, the warrant’s exercise price will be reduced and the number of shares issuable under the warrant will be increased. The amount of such adjustment, if any, will be determined pursuant to a formula specified in the warrant and will depend on the number of shares issued, the offering price and the current market price of our common stock at the time of the issuance of such securities. Adjustments to the warrant pursuant to these antidilution provisions may result in significant dilution to the interests of our existing stockholders and may adversely affect the market price of our common stock. The antidilution provisions may also limit our ability to obtain additional financing on terms favorable to us.

      Moreover, we may not realize any cash proceeds from the exercise of the warrant held by Conexant. A holder of the warrant may opt for a cashless exercise of all or part of the warrant. In a cashless exercise, the holder of the warrant would make no cash payment to us, and would receive a number of shares of our common stock having an aggregate value equal to the excess of the then-current market price of the shares of our common stock issuable upon exercise of the warrant over the exercise price of the warrant. Such an issuance of common stock would be immediately dilutive to the interests of other stockholders.

      Some of our directors are Conexant directors, and our non-executive chairman of the board is chairman of the board and chief executive officer of Conexant. Several of our directors and executive officers own Conexant common stock and hold options to purchase Conexant common stock. Service on our board of directors and as a director or officer of Conexant, or ownership of Conexant common stock by our directors and executive officers, could create, or appear to create, potential conflicts of interest when directors and officers are faced with decisions that could have different implications for us and Conexant. For example, potential conflicts could arise in connection with decisions involving the warrant to purchase our common stock issued to Conexant, or other agreements entered into between us and Conexant in connection with the distribution.

      Our restated certificate of incorporation includes provisions relating to the allocation of business opportunities that may be suitable for both us and Conexant based on the relationship to the companies of the individual to whom the opportunity is presented and the method by which it was presented and also includes provisions limiting challenges to the enforceability of contracts between us and Conexant.

      We may have difficulty resolving any potential conflicts of interest with Conexant, and even if we do, the resolution may be less favorable than if we were dealing with an entirely unrelated third party.

      Our restated certificate of incorporation, our amended and restated bylaws, our amended rights agreement and the Delaware General Corporation Law contain several provisions that would make more difficult an acquisition of control of us in a transaction not approved by our board of directors. Our restated certificate of incorporation and amended and restated bylaws include provisions such as:

      Our rights agreement gives our stockholders certain rights that would substantially increase the cost of acquiring us in a transaction not approved by our board of directors.

      In addition to the rights agreement and the provisions in our restated certificate of incorporation and amended bylaws, Section 203 of the Delaware General Corporation Law generally provides that a corporation shall not engage in any business combination with any interested stockholder during the three-year period following the time that such stockholder becomes an interested stockholder, unless a majority of the directors then in office approves either the business combination or the transaction that results in the stockholder becoming an interested stockholder or specified stockholder approval requirements are met.

Available Information

      We maintain an Internet website at http://www.mindspeed.com. Our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and amendments to such reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act, and other information related to our company, are available free of charge on this site as soon as reasonably practicable after such reports are filed with or furnished to the Securities and Exchange Commission (SEC). Our Standards of Business Conduct, Guidelines on Corporate Governance and Board Committee Charters are also available on our website. We will provide reasonable quantities of paper copies of filings free of charge upon request. In addition, we will provide a copy of the Board Committee Charters to stockholders upon request. No portion of our Internet website or the information contained in or connected to the website is incorporated into this Annual Report on Form 10-K.

      At October 28, 2005, we occupied our headquarters located in Newport Beach, California (which includes design and sales offices), 4 design centers and 13 sales locations. These facilities had an aggregate floor space of approximately 259,000 square feet, all of which is leased, consisting of approximately 193,000 square feet at our headquarters, 45,000 square feet at our design centers and 21,000 square feet at our sales locations. We believe our properties are well maintained, are in sound operating condition and contain all the equipment and facilities to operate at present levels.

      Through our design centers, we provide design engineering and product application support and after-sales service to our OEM customers. The design centers are strategically located to take advantage of key technical and engineering talent worldwide.

      We are currently not engaged in legal proceedings that require disclosure under this Item.

      No matters were submitted to a vote of our stockholders during the quarter ended September 30, 2005.

PART II

      Our common stock is traded on the Nasdaq National Market under the symbol “MSPD.” From June 30, 2003 to December 12, 2003, our common stock was traded on the American Stock Exchange. Prior to June 30, 2003, we were a wholly owned subsidiary of Conexant. The following table lists the high and low sales price of our common stock as reported by the Nasdaq National Market or the American Stock Exchange, as applicable, for the periods indicated.

      The last reported sale price of our common stock on November 18, 2005 was $2.06 and there were approximately 40,400 holders of record of our common stock. However, many holders’ shares are listed under their brokerage firms’ names. We estimate our actual number of beneficial stockholders to be approximately 165,500.

      We have never paid cash dividends on our capital stock. We currently intend to retain any earnings for use in our business and do not anticipate paying cash dividends in the foreseeable future.

      We made no repurchases of our equity securities during fiscal 2005.

      The selected consolidated financial data presented below should be read in conjunction with Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements and the notes thereto appearing elsewhere in this Annual Report on Form 10-K. Our consolidated selected financial data have been derived from our audited consolidated financial statements. The selected financial data include our results of operations and financial position while we were part of Conexant prior to June 27, 2003. The financial data for periods prior to June 27, 2003 do not reflect what our results of operations and financial position would have been if we had operated as an independent public company during those periods.

Overview

      We design, develop and sell semiconductor networking solutions for communications applications in enterprise, access, metropolitan and wide-area networks. Our products, ranging from optical network transceiver solutions to voice and IP processors, are classified into three focused product families: high-performance analog products, multiservice access DSP products and WAN communications products. Our products are sold to OEMs for use in a variety of network infrastructure equipment, including mixed media gateways, high-speed routers, switches, access multiplexers, cross-connect systems, add-drop multiplexers, digital loop carrier equipment, IP PBXs and optical modules. Service providers use this equipment for the processing, transmission and switching of high-speed voice, data and video traffic, including advanced services such as VoIP, within different segments of the communications network. Our customers include Alcatel Data Networks, S.A., Cisco Systems, Inc., McData Corporation, Nortel Networks, Inc. and Siemens A.G.

      We market and sell our semiconductor products and system solutions directly to leading network infrastructure OEMs. We also sell our products indirectly through electronic component distributors and third-party electronic manufacturing service providers, who manufacture products incorporating our semiconductor networking solutions for OEMs. Sales to distributors accounted for approximately 47% of our revenues for fiscal 2005. For fiscal 2005, distributors Avnet, Inc. and Alltek Technology Corporation and manufacturing service providers Jabil Circuit, Inc. and Sanmina-SCI Corporation accounted for 16%, 12%, 14% and 11%, respectively, of our net revenues. Including indirect sales, we believe that Cisco Systems, Inc. accounted for approximately 22% of our fiscal 2005 net revenues and that no other OEM customer accounted for 10% or more of our net revenues. For fiscal 2005, approximately 71% of our total sales were to customers located outside the United States, primarily in the Asia-Pacific region and Europe. We believe a substantial portion of the products we sell to OEMs and third-party manufacturing service providers in the Asia-Pacific region is ultimately shipped to end markets in the Americas and Europe.

Trends and Factors Affecting Our Business

      During the late 1990’s and extending into 2000, the semiconductor industry in general, and communications applications in particular, enjoyed unprecedented growth, benefiting from the rapid expansion of the Internet and other communication services worldwide. Beginning in fiscal 2001, we — like many of our customers and competitors — were adversely impacted by a global economic slowdown and an abrupt decline in demand for many of the end-user products that incorporate our communications semiconductor products. The impact of weakened end-customer demand was compounded by higher than normal levels of equipment and component inventories held by many of our customers. These conditions represented the worst downturn in the history of the semiconductor industry, and the market for communications semiconductor products was impacted more severely than the industry as a whole. During this period, our annual revenues decreased from $579.2 million for fiscal 2000 to $80.0 million in fiscal 2002.

      In response to this severe downturn in the markets for our products, we took a number of actions designed to improve our financial performance. To reduce our operating cost structure, we implemented workforce reductions, significant decreases in capital spending, the consolidation of certain facilities and salary reductions for our senior management team. These actions reduced our workforce from approximately 1,500 employees in fiscal 2000 to 524 employees at October 28, 2005. These actions reduced our combined research and development and selling, general and administrative expenses from $306.2 million in fiscal 2001 to $113.2 million in fiscal 2005.

      At the same time, we have sought to maximize our return on our research and development spending by focusing our research and development investment in what we believe are key high-growth markets, including VoIP and high-performance analog applications. We eliminated research and development spending in product areas that we believe have a longer return-on-investment timeframe or that address slower growth markets. For example, in 2002 we ceased research and development efforts directed toward applications such as high-end optical networking. In fiscal 2005, we terminated research and development programs principally in our ATM/ MPLS network processor products and, to a lesser extent, our T/ E carrier transmission products. Over the past four years, we closed five design centers and we sold the assets of the NetPlane Systems, Inc. software business.

      Our products are components of network infrastructure equipment. As a result, we rely on network infrastructure OEMs to select our products from among alternative offerings to be designed into their equipment. These “design wins” are an integral part of the long sales cycle for our products. Our customers may need six months or longer to test and evaluate our products and an additional six months or more to begin volume production of equipment that incorporates our products. We believe our close relationships with leading network infrastructure OEMs facilitate early adoption of our products during development of their products, enhance our ability to obtain design wins and encourage adoption of our technology by the industry.

      We are dependent upon third parties for the manufacture, assembly and testing of our products. Our ability to bring new products to market, to fulfill orders and to achieve long-term revenue growth is dependent on our ability to obtain sufficient external manufacturing capacity, including wafer fabrication capacity. Periods of upturns in the semiconductor industry may be characterized by rapid increases in demand and a shortage of wafer fabrication capacity. In such periods, we may experience longer lead times or indeterminate delivery schedules, which may adversely affect our ability to fulfill orders for our products. We may also incur increased manufacturing costs, including costs of finding acceptable alternative foundries.

      In order to achieve profitability, we must achieve substantial revenue growth. Our ability to achieve the necessary revenue growth will depend on increased demand for network infrastructure equipment that incorporates our products, which in turn depends primarily on the level of capital spending by communications service providers. We believe the market for network infrastructure equipment in general, and for communications semiconductors in particular, offers attractive long-term growth prospects due to increasing demand for network capacity, the continued upgrading and expansion of existing networks and the build-out of telecommunication networks in developing countries. However, the semiconductor industry is highly cyclical and is characterized by constant and rapid technological change, rapid product obsolescence and price erosion, evolving technical standards, short product life cycles and wide fluctuations in product supply and demand. These factors have caused substantial fluctuations in our revenues and our results of operations in the past, and we may experience cyclical fluctuations in our business in the future.

Spin-off from Conexant Systems, Inc.

      On June 27, 2003, Conexant completed the distribution to Conexant stockholders of all outstanding shares of common stock of Mindspeed, then a wholly owned subsidiary of Conexant. In the distribution, each Conexant stockholder received one share of our common stock, par value $.01 per share (including an associated preferred share purchase right), for every three shares of Conexant common stock held and cash for any fractional share of our common stock. Following the distribution, we began operations as an independent, publicly held company. Our common stock now trades on the Nasdaq National Market under the ticker symbol “MSPD”.

      Prior to the distribution, Conexant transferred to us the assets and liabilities of its Mindspeed business, including the stock of certain subsidiaries, and certain other assets and liabilities which were allocated to us under the Distribution Agreement entered into between us and Conexant. Also prior to the distribution, Conexant contributed to us cash in an amount such that at the time of the distribution our cash balance was $100 million. We issued to Conexant a warrant to purchase 30 million shares of our common stock at a price of $3.408 per share, exercisable for a period of ten years after the distribution. We and Conexant also entered into a Credit Agreement, an Employee Matters Agreement, a Tax Allocation Agreement, a Transition Services Agreement and a Sublease.

      Our consolidated financial statements for periods prior to the distribution include allocations of certain Conexant expenses. The expense allocations were determined using methods that we and Conexant considered to be reasonable reflections of services provided or the benefit we received. The allocation methods include specific identification, relative revenues or costs, and headcount. We believe that the expenses allocated to us are representative of the operating expenses we would have incurred had we operated on a stand-alone basis.

Critical Accounting Policies

      The preparation of financial statements in accordance with accounting principles generally accepted in the United States requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Among the significant estimates affecting our consolidated financial statements are those relating to inventories, allowances for doubtful accounts, revenue recognition, impairment of long-lived assets and income taxes. We regularly evaluate our estimates and assumptions based upon historical experience and various other factors that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. To the extent actual results differ from those estimates, our future results of operations may be affected.

      Inventories — We write down our inventory for estimated obsolete or unmarketable inventory in an amount equal to the difference between the cost of inventory and the estimated market value based upon assumptions about future demand and market conditions. If actual market conditions are less favorable than our estimates, additional inventory write-downs may be required. In the event we experience unanticipated demand and are able to sell a portion of the inventories we have previously written down, our gross margins will be favorably affected.

      Revenue Recognition — We recognize revenues when the following fundamental criteria are met: (i) persuasive evidence of an arrangement exists; (ii) delivery has occurred; (iii) our price to the customer is fixed or determinable; and (iv) collection of the sales price is reasonably assured. Delivery occurs when goods are shipped and title and risk of loss transfer to the customer, in accordance with the terms specified in the arrangement with the customer. Revenue recognition is deferred in all instances where the earnings process is incomplete. We make certain product sales to electronic component distributors under agreements allowing for a right to return unsold products. We defer the recognition of revenue on all sales to these distributors until the products are sold by the distributors to a third party. We record a reserve for estimated sales returns and allowances in the same period as the related revenues are recognized. We base these estimates on our historical experience or the specific identification of an event necessitating a reserve. To the extent actual sales returns differ from our estimates, our future results of operations may be affected. Development revenue is recognized when services are performed and was not significant for any of the periods presented.

      Allowance for Doubtful Accounts — We maintain allowances for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments. Our estimates of such losses are based on an assessment of the aging of outstanding accounts receivable and a review of specific customer accounts. If the financial condition of our customers were to deteriorate, our actual losses may exceed our estimates and additional allowances would be required.

      Impairment of Long-Lived Assets — We continually monitor and review long-lived assets, including fixed assets, goodwill and intangible assets, for impairment whenever events or changes in circumstances indicate

that the carrying amount of any such asset may not be recoverable. The determination of recoverability is based on an estimate of the undiscounted cash flows expected to result from the use of an asset and its eventual disposition. The estimate of cash flows is based upon, among other things, certain assumptions about expected future operating performance, growth rates and other factors. Our estimates of undiscounted cash flows may differ from actual cash flows due to, among other things, technological changes, economic conditions, changes to our business model or changes in our operating performance. If the sum of the undiscounted cash flows (excluding interest) is less than the carrying value, we recognize an impairment loss, measured as the amount by which the carrying value exceeds the fair value of the asset.

      Deferred Income Taxes — We have provided a full valuation allowance against our U.S federal and state deferred tax assets. If sufficient evidence of our ability to generate future U.S federal and/or state taxable income becomes apparent, we may be required to reduce our valuation allowance, resulting in income tax benefits in our statement of operations. We evaluate the realizability of our deferred tax assets and assess the need for a valuation allowance quarterly.

Recent Accounting Pronouncements

      In December 2004, the Financial Accounting Standards Board (FASB) issued Statement of Financial Accounting Standards (SFAS) No. 123 (revised 2004), “Share-Based Payment” (SFAS 123R). Under SFAS 123R, we will no longer be able to account for share-based compensation transactions using the intrinsic value method of Accounting Principles Board (APB) Opinion No. 25. Instead, we will be required to account for such transactions using a fair-value method and to recognize the fair value of each award over the service period. SEC Release No. 33-8568 makes SFAS 123R effective for fiscal years beginning after June 15, 2005, and SFAS 123R allows for several alternative transition methods. We plan to adopt SFAS 123R as of the beginning of the fiscal 2006 first quarter using “modified prospective application,” which will require that we recognize compensation expense for new awards, modified awards and for any awards outstanding at the effective date but vesting after such date. The actual amounts of stock compensation expense we recognize in periods following the adoption of SFAS 123R will depend on a number of factors, including the types of awards made, the specific terms of awards, changes in the market price of our common stock and other factors. Although we are currently evaluating the impact of SFAS 123R on our results of operations, we expect the adoption of SFAS 123R to materially increase our operating expenses beginning in fiscal 2006. See “Stock-Based Compensation Programs” below.

      In November 2004, the FASB issued SFAS No. 151, “Inventory Costs, an Amendment of Accounting Research Bulletin (ARB) No. 43, Chapter 4.” SFAS 151 amends the guidance in ARB No. 43 to clarify that abnormal amounts of idle facility expense, freight, handling costs and wasted material (spoilage) should be recognized as current-period charges. In addition, SFAS 151 requires that allocation of fixed production overhead to the costs of conversion be based on the normal capacity of the production facilities. We must adopt SFAS 151 as of the beginning of fiscal 2006, and we do not expect that the adoption of SFAS 151 will have a material impact on our financial condition or results of operations.

      In May 2005, the FASB issued SFAS No. 154, “Accounting Changes and Error Corrections,” which replaces APB Opinion No. 20, “Accounting Changes,” and SFAS No. 3, “Reporting Accounting Changes in Interim Financial Statements.” SFAS No. 154 applies to all voluntary changes in accounting principle and requires retrospective application (a term defined by the statement) to prior periods’ financial statements, unless it is impracticable to determine the effect of a change. It also applies to changes required by an accounting pronouncement that does not include specific transition provisions. SFAS 154 is effective for accounting changes and corrections of errors made in fiscal years beginning after December 15, 2005. We will adopt SFAS No. 154 as of the beginning of fiscal 2007, and we do not expect that the adoption of SFAS 154 will have a material impact on our financial condition or results of operations.

Stock-Based Compensation Programs

      We use stock-based compensation to attract and retain employees and to provide long-term incentive compensation that aligns the interests of our employees with those of our stockholders. Historically, our stock-

based compensation consisted principally of stock options. Eligible employees received grants of stock options at the time of hire; we also made broad-based stock option grants covering substantially all of our employees annually. Stock option awards have exercise prices equal to the market price of our common stock at the grant date and are subject to time-based vesting (generally over four years). From time to time we have also used restricted stock awards with time-based vesting for incentive or retention purposes.

      For fiscal 2006, we have revised our compensation arrangements to provide both current and long-term incentive compensation. Stock-based compensation is expected to principally consist of restricted stock awards. The majority of the restricted stock awards is intended to provide performance emphasis and incentive compensation through vesting tied to each employee’s performance against individual goals. Additional restricted stock awards to certain senior management personnel have vesting tied to improvements in our company operating performance. The remainder of the restricted stock awards, intended to provide long-term incentive compensation, is expected to vest ratably over a period of four years (subject to continued service). From time to time, we may also grant stock options or other stock-based awards for incentive or retention purposes. We expect to formally review, and may further revise, our compensation arrangements for fiscal 2007 and thereafter based on regular assessment of the effectiveness of our compensation arrangements and to keep our overall compensation package at market levels.

      The fair value of restricted stock awards under this program will be measured based upon the market price of our common stock at the date of grant. The fair value of each award will be recognized on a straight-line basis over the vesting or service period. While the actual amounts of expense we record in each fiscal period will depend on a number of factors, including the number of restricted shares awarded, the market price of our common stock, the vesting periods, the number of awards that ultimately vest and other factors, we expect that the awards under this program will significantly increase our operating expenses beginning in fiscal 2006.

      As required by SFAS 123R, our stock compensation expense for fiscal 2006 and thereafter will also include the value of unvested awards outstanding at September 30, 2005. We expect the amount of stock compensation expense for unvested stock option awards outstanding at September 30, 2005, by fiscal year, will be approximately $3.5 million (2006), $1.4 million (2007) and $0.3 million (2008). However, the actual amounts of such expense will depend on forfeitures of outstanding awards.

Results of Operations

      In the fourth quarter of fiscal 2004, our revenues and operating loss were adversely affected by a drop in end-customer demand — particularly in China — combined with a build-up in the levels of inventory held by a number of our key customers. As a result, our fiscal 2004 fourth quarter net revenues decreased approximately 25%, as compared to the preceding quarter, to $26.6 million. The revenue decrease reflects lower sales volume across our multiservice access DSP products, high-performance analog products and T/ E carrier products. Our operating loss for the fiscal 2004 fourth quarter was $26.2 million.

      We believe that during fiscal 2005, the levels of inventories at our customers and other issues that adversely affected our revenues late in fiscal 2004 have generally been resolved. In fiscal 2005, our fourth quarter revenues grew 17% year over year, reaching $31.1 million. Our quarterly operating loss for the fiscal 2005 fourth quarter decreased to $4.6 million. The improvement in our operating loss reflects the revenue growth we achieved, a $4.8 million decrease in combined quarterly research and development and selling, general and administrative expenses and a $12.6 million decrease in amortization of intangible assets.

Net Revenues

      The following table summarizes our net revenues:

      The 6% decrease in our revenues for fiscal 2005 compared to fiscal 2004 reflects lower sales volumes in our WAN communications products, partially offset by increased shipments of our multiservice access DSP products and our high performance analog products. Sales of our multiservice access DSP products benefited from increased shipments of our Comcerto series VoIP processors for use in VoIP applications. In our high performance analog products, we saw increased demand for our crosspoint switches, including video applications, and our physical media dependent devices. Revenues from our WAN communications products reflect lower demand for our T1/ E1 and T3/ E3 line interface units and DSL transceivers resulting from a slowdown in consumption of our products in access and metropolitan area network applications. Sales of WAN communications products also reflect the lower demand we experienced for our ATM/ MPLS network processor products for use in wireless, enterprise and broadband infrastructure applications.

      The 46% increase in our net revenues for fiscal 2004 over fiscal 2003 reflects higher sales volumes in each of our three product families, led by our multiservice access DSP products and our WAN communications products. We experienced sharply increased demand for our multiservice access VoIP solutions used in carrier infrastructure applications. Our WAN communications products benefited from higher demand for our T/E transmission and SONET solutions, including our DS3/ E3 products and HDLC protocol controllers. OEMs use these devices in next-generation networking equipment designed to increase the capacity, flexibility and speed of metropolitan area networks. Revenues from our WAN communications products also reflect increased demand, in comparison to fiscal 2003 levels, for our ATM/ MPLS network processor products for use in wireless, enterprise and broadband infrastructure applications. Our high-performance analog products benefited from continued demand for our physical media dependent devices from OEMs in the Asia-Pacific region, for use in infrastructure equipment for fiber-to-the-premise deployments and metropolitan area networks.

Gross Margin

      Gross margin represents revenues less cost of goods sold. As a fabless semiconductor company, we use third parties (including TSMC, Jazz and Amkor) for wafer fabrication and assembly and test services. Our cost of goods sold consists predominantly of: purchased finished wafers; assembly and test services; royalty and other intellectual property costs; labor and overhead costs associated with product procurement; and sustaining engineering expenses pertaining to products sold.

      Our gross margin for fiscal 2005 compared to fiscal 2004 reflects the 6% decrease in our annual revenues and the adverse impact of lower manufacturing volumes we experienced in fiscal 2005. These factors were partially offset by a lower provision for excess and obsolete goods. Our gross margin for fiscal 2004 compared with fiscal 2003 reflects the 46% increase in revenues combined with the favorable impact of the cost reduction actions we took in fiscal 2003.

      Our gross margins also benefited from the sale of inventories with an original cost of $8.7 million (2005), $9.0 million (2004) and $4.1 million (2003) that we had written down to a zero cost basis during fiscal 2001. These sales resulted from renewed demand for certain products that was not anticipated at the time of the write-downs. The previously written-down inventories were generally sold at prices which exceeded their original cost.

      In fiscal 2001, we recorded an aggregate of $83.5 million of inventory write-downs, reducing the cost basis of the affected inventories to zero. The fiscal 2001 inventory write-downs resulted from the sharply reduced end-customer demand for network infrastructure equipment during that period. As a result of these market conditions, we experienced a significant number of order cancellations and a decline in the volume of new orders beginning in the fiscal 2001 first quarter. The inventories written down in fiscal 2001 principally consisted of multiservice access processors and DSL transceivers.

      We assess the recoverability of our inventories at least quarterly through a review of inventory levels in relation to foreseeable demand (generally over twelve months). Foreseeable demand is based upon all available information, including sales backlog and forecasts, product marketing plans and product life cycles. When the inventory on hand exceeds the foreseeable demand, we write down the value of those inventories which, at the time of our review, we expect to be unable to sell. The amount of the inventory write-down is the excess of historical cost over estimated realizable value. Once established, these write-downs are considered permanent adjustments to the cost basis of the excess inventory.

      Our products are used by OEMs that have designed our products into network infrastructure equipment. For many of our products, we gain these design wins through a lengthy sales cycle, which often includes providing technical support to the OEM customer. In the event of the loss of business from existing OEM customers, we may be unable to secure new customers for our existing products without first achieving new design wins. When the quantities of inventory on hand exceed foreseeable demand from existing OEM customers into whose products our products have been designed, we generally will be unable to sell our excess inventories to others, and the estimated realizable value of such inventories to us is generally zero.

      From the time of the fiscal 2001 inventory write-downs through September 30, 2005, we scrapped a portion of these inventories having an original cost of $36.1 million and sold a portion of these inventories with an original cost of $26.4 million. The sales resulted from increased demand beginning in the first quarter of fiscal 2002 which was not anticipated at the time of the write-downs. As of September 30, 2005, we continued to hold inventories with an original cost of $21.0 million which were previously written down to a zero cost basis. We currently intend to hold these remaining inventories and will sell these inventories if we experience renewed demand for these products. While there can be no assurance that we will be able to do so, if we are able to sell a portion of the inventories which are carried at zero cost basis, our gross margins will be favorably affected by an amount equal to the original cost of the zero-cost basis inventory sold. To the extent that we do not experience renewed demand for the remaining inventories, they will be scrapped as they become obsolete.

      We base our assessment of the recoverability of our inventories, and the amounts of any write-downs, on currently available information and assumptions about future demand and market conditions. Demand for our products may fluctuate significantly over time, and actual demand and market conditions may be more or less favorable than those projected by management. In the event that actual demand is lower than originally projected, additional inventory write-downs may be required.

Research and Development

      Our research and development (R&D) expenses consist principally of direct personnel costs, photomasks, electronic design automation tools, outside design services and pre-production evaluation and test costs. The decrease in R&D expenses for fiscal 2005 compared to fiscal 2004 primarily reflects lower

headcount and personnel-related costs resulting from our expense reduction actions as well as lower supplies costs. As part of our cost reduction actions, during fiscal 2005 we closed design centers in Herzlia, Israel and Lisle, Illinois.

      The decrease in R&D expenses for fiscal 2004 compared to 2003 primarily reflects the lower headcount and personnel-related costs that resulted from the expense reduction actions we initiated in fiscal 2003. During fiscal 2003, we implemented additional workforce reductions and closed design centers in San Jose, California and Bristol, United Kingdom. Also during 2003, we completed the divestiture of the NetPlane software business. The decrease in R&D expenses for fiscal 2004 as compared to fiscal 2003 also reflects lower costs for photomask development, materials and supplies.

Selling, General and Administrative

      Our selling, general and administrative (SG&A) expenses include personnel costs, independent sales representative commissions, product marketing, applications engineering and other marketing costs. Our SG&A expenses also include costs of corporate functions including accounting, finance, legal, human resources, information systems and communications. The decrease in our SG&A expenses for fiscal 2005 compared to fiscal 2004 primarily reflects the positive impact of lower headcount and personnel-related costs resulting from our expense reduction and restructuring actions as well as lower selling costs resulting from lower sales volumes in fiscal 2005.

      The decrease in SG&A expenses for fiscal 2004 compared to fiscal 2003 primarily reflects the positive impact of lower headcount and personnel-related costs resulting from the expense reduction actions we initiated during fiscal 2003. The expense reductions were partially offset by increased selling costs resulting from higher sales volumes and public company costs. SG&A expenses for fiscal 2004 also include employee separation costs of $630,000 for severance benefits payable to certain former officers of the company as a result of organizational changes.

Amortization of Intangible Assets and Change in Accounting for Goodwill

      Amortization of intangible assets decreased for fiscal 2005, as compared to fiscal 2004 and 2003, as the remainder of our intangible assets became fully amortized during the year. Intangible assets are amortized over periods averaging approximately five years for each major asset class and extending to various dates through June 2005. We will not record any additional amortization expense on our existing intangible assets in future periods.

      We adopted SFAS 142, “Goodwill and Other Intangible Assets,” as of the beginning of fiscal 2003. Upon adoption of SFAS 142, we completed the transition impairment test of our goodwill required by SFAS 142. Our business consists of one reporting unit (as defined in SFAS 142) and, for purposes of the impairment test, we determined its fair value considering both an income approach and a market approach. Management determined that the recorded value of goodwill exceeded its fair value (estimated to be zero) by $573.2 million. In the first quarter of fiscal 2003, we recorded a $573.2 million charge — reflected in the accompanying statement of operations as the cumulative effect of a change in accounting principle — to write down the value of goodwill to estimated fair value. The impaired goodwill comprises the unamortized balances of goodwill relating to Maker Communications, Inc., HotRail, Inc., Microcosm Communications Limited and Applied Telecom, Inc. Conexant acquired each of these businesses during fiscal 2000 for the Mindspeed business. The impairment charge resulted from the sharp decline in the valuations assigned to communications semiconduc-

tor companies as of the time of the transition impairment test as compared with valuations at the dates of the respective acquisitions.

Special Charges

      Special charges consist of the following:

      2005 Impairments — During fiscal 2005, we recorded asset impairment charges totaling $810,000 related to property and equipment that we determined to abandon or scrap, including assets associated with the closure of our former design centers in Herzlia, Israel and Lisle, Illinois.

      2003 Impairments — During fiscal 2003, we recorded an impairment charge of $19.1 million to write down the carrying value of identified intangible assets (principally developed technology) related to our HotRail, Inc. subsidiary. In January 2003, we decided to close the HotRail design center and to curtail investment in selected associated products. We evaluated the recoverability of the assets of the HotRail business to determine whether their value was impaired, based upon the future cash flows expected to be generated by the affected products over the remainder of their life cycles (estimated to be approximately five years). The estimated sales volumes, pricing, gross margin and operating expenses were consistent with historical trends and other available information. Since the estimated undiscounted cash flows were less than the carrying value (approximately $27.4 million) of the related assets, we determined that the value of such assets was impaired. We recorded an impairment charge of $19.1 million, which was determined by comparing the estimated fair value of the assets to their carrying value. The fair value of the assets was determined by computing the present value of the expected future cash flows using a discount rate of 18%, which we believe is commensurate with the underlying risks associated with the projected cash flows. We believe the assumptions used in the discounted cash flow model represent a reasonable estimate of the fair value of the assets. The write-down established a new cost basis for the impaired assets.

      Also during fiscal 2003, we recorded asset impairment charges totaling $4.3 million related to certain assets that we determined to abandon or scrap.

      We have implemented a number of cost reduction initiatives to improve our operating cost structure. The cost reduction initiatives included workforce reductions, significant reductions in capital spending, the consolidation of certain facilities and salary reductions for the senior management team. During fiscal 2005, we completed the cost reduction actions under the restructuring plans and we realized their full effect beginning in the fiscal 2004 fourth quarter.

      Mindspeed Strategic Restructuring Plan — In fiscal 2002, we initiated a number of cost reduction actions — including workforce reductions, the closure of Novanet Semiconductor Ltd. and the divestiture of NetPlane — and recorded fiscal 2002 restructuring charges totaling $23.2 million. In fiscal 2003, we implemented an additional workforce reduction affecting approximately 80 employees and closed our design center in Bristol, England. We recorded fiscal 2003 restructuring charges of $2.3 million for the workforce reductions, based upon estimates of the cost of severance benefits for the affected employees, and $4.6 million for commitments under license obligations for the purchase of design tools that we determined would not be

used in the future. During fiscal 2003, we completed the workforce reductions. During fiscal 2005, we reversed $740,000 of previously accrued costs upon the resolution of liabilities under certain operating leases.

      Activity and liability balances related to the Mindspeed strategic restructuring plan for the three years ended September 30, 2005 are as follows (in thousands):

      Mindspeed 2003 Restructuring Plan — In March 2003, we announced a number of expense reduction and restructuring initiatives intended to further improve our operating cost structure. The actions included the closure of the HotRail design center in San Jose, California and a workforce reduction of approximately 130 employees. Restructuring charges for this plan included an aggregate of $4.8 million for severance benefits paid to the affected employees and $1.3 million for costs associated with the consolidation of certain facilities and lease cancellation and related costs. Activity and liability balances related to the Mindspeed 2003 restructuring plan through September 30, 2005 are as follows (in thousands):

      Mindspeed 2004 Restructuring Plan — In October 2004, we announced a restructuring plan intended to reduce our operating expenses while focusing our research and development investment in key high-growth markets, including VoIP and high-performance analog applications. The expense reduction actions included workforce reductions and the closure of design centers in Herzlia, Israel and Lisle, Illinois. Approximately 80% of the expense reductions were derived from the termination of research and development programs which we believe had a longer return-on-investment timeframe or that addressed slower growth markets. The affected research and development programs were principally our ATM/ MPLS network processor products and, to a lesser extent, our T/ E carrier transmission products. The remainder of the cost savings came from the selling, general and administrative functions. Through September 30, 2005, we had completed substantially all of these actions, reducing our workforce by approximately 90 employees.

      In connection with these actions, we recorded fiscal 2005 restructuring charges of approximately $5.9 million. The restructuring charges included an aggregate of $3.4 million for the workforce reductions,

based upon estimates of the cost of severance benefits for the affected employees, and approximately $2.5 million related to contractual obligations for the purchase of design tools and other services in excess of anticipated requirements.

      Activity and liability balances related to the Mindspeed 2004 restructuring plan through September 30, 2005 are as follows (in thousands):

      Other Restructuring Plans — In fiscal 2003, we reversed $261,000 of previously accrued costs upon the resolution of liabilities for severance benefits payable under three additional restructuring plans initiated in fiscal 2001 and 2002. Also in fiscal 2003, we made cash payments of $80,000 to complete the cost reduction actions under one of these plans and, as of September 30, 2003, we had no remaining liabilities under these restructuring plans.

      Through September 30, 2005, we have paid an aggregate of $41.1 million in connection with our restructuring plans (including amounts paid prior to fiscal 2003) and we have a remaining accrued restructuring balance totaling $4.0 million (including $509,000 classified as a long-term liability), principally representing obligations under non-cancelable leases and other contractual commitments. We expect to pay these obligations over their respective terms, which expire at various dates through fiscal 2008. The payments will be funded from available cash balances and funds from product sales and are not expected to impact significantly our liquidity.

      Other special charges for fiscal 2003 consist of a $9.0 million gain on the sale of the assets of NetPlane, partially offset by losses on other asset sales.

Interest Expense

      Interest expense for fiscal 2005 represents interest on the $46 million convertible senior notes we issued in December 2004.

Other Income, Net

      Other income, net principally consists of interest income, foreign exchange gains and losses, franchise taxes and other non-operating gains and losses. The increase in other income for fiscal 2005 compared to fiscal 2004 principally reflects higher interest income, partially offset by the write-off of capitalized costs associated with the terminated credit facility. The increase in interest income resulted from higher invested cash balances and the higher interest rates that prevailed during fiscal 2005. The decrease in other income for fiscal 2004 as compared with fiscal 2003 reflects increased franchise taxes and lower foreign exchange gains, partially offset by increased interest income resulting from higher average invested cash balances during fiscal 2004.

Provision for Income Taxes

      Our provision for income taxes for fiscal years 2005, 2004 and 2003 principally consisted of income taxes incurred by our foreign subsidiaries. As a result of our recent operating losses and our expectation of future operating results, we determined that it is more likely than not that the U.S. federal and state income tax benefits (principally net operating losses we can carry forward to future years) which arose during fiscal 2005, 2004 and 2003 will not be realized. Accordingly, we have not recognized any income tax benefits relating to our U.S. federal and state operating losses for those periods and we do not expect to recognize any income tax benefits relating to future operating losses until we believe that such tax benefits are more likely than not to be realized. We expect that our provision for income taxes for fiscal 2006 will principally consist of income taxes related to our foreign operations.

      As of September 30, 2005, we had a valuation allowance of $251 million against our U.S. federal and state deferred tax assets (which reduces their carrying value to zero) because we do not expect to realize these deferred tax assets through the reduction of future income tax payments. As of September 30, 2005, we had U.S. federal net operating loss carryforwards of approximately $573 million, including the net operating loss carryforwards we retained in the distribution.

Quarterly Results of Operations

      The following table presents our operating results for each of the eight fiscal quarters in the period ended September 30, 2005. The information for each of these quarters is derived from our unaudited interim financial statements which have been prepared on the same basis as the audited consolidated financial statements included in this Annual Report on Form 10-K. In our opinion, all necessary adjustments, which consist only of normal and recurring accruals as well as the inventory write-downs and special charges, have been included to fairly present our unaudited quarterly results. This data should be read together with our consolidated financial statements and the notes thereto included in this report.

      Our revenues for the fourth quarter of fiscal 2004 were adversely affected by a drop in end-customer demand — particularly in China — combined with a build-up in the levels of inventory held by a number of our key customers. We believe that during fiscal 2005, the levels of inventories at our customers and other issues that adversely affected our revenues late in fiscal 2004 have generally resolved. The growth in our quarterly revenues for fiscal 2005 generally reflects increased shipments of our multiservice access DSP products and our high performance analog products, offset by lower sales volumes in our WAN communications products.

      Our quarterly R&D and SG&A expenses generally decreased through fiscal 2004 and 2005 as a result of the workforce reductions and other cost reduction initiatives we implemented. Our combined R&D and SG&A expenses of $26.4 million for the fiscal 2005 fourth quarter reflect the full effect of the cost savings from the restructuring plans we initiated in fiscal 2004 and 2005.

      Quarterly amortization of intangible assets decreased in fiscal 2005 as the remainder of our intangible assets became fully amortized.

      In fiscal 2004 and fiscal 2005, we recorded special charges for our restructuring plans. Special charges for fiscal 2005 also include asset impairments totaling $0.8 million.

      Interest expense for fiscal 2005 represents interest on the $46 million convertible senior notes we issued in December 2004. Other income increased during fiscal 2005 as a result of higher invested cash balances and increasing interest rates.

      In the past, our quarterly operating results have fluctuated due to a number of factors, many of which are outside our control. These include changes in the overall demand for network infrastructure equipment, the timing of new product introductions, the timing of receipt, reduction or cancellation of significant orders by customers, supply availability and other factors that have had a significant impact on our revenues and gross margins. Significant quarterly fluctuations in results of operations have also caused significant fluctuations in our liquidity and working capital, including our cash and cash equivalents, accounts receivable and payable and inventories.

Liquidity and Capital Resources

      Cash used in operating activities was $30.2 million for fiscal 2005 compared to $43.2 million for fiscal 2004 and $125.6 million for fiscal 2003. Operating cash flows for fiscal 2005 reflect our net loss of $62.6 million, partially offset by non-cash charges (depreciation, amortization and other) of $31.9 million, and net working capital decreases of approximately $0.6 million.

      The net working capital decreases for fiscal 2005 included a $3.4 million decrease in accounts receivable resulting from a decrease in our average collection period and a $767,000 decrease in net inventories. These amounts were partially offset by a $3.3 million decrease in accounts payable, principally related to the timing of vendor payments.

      Cash used in investing activities of $44.7 million for fiscal 2005 principally consisted of net purchases of marketable securities of $40.9 million and capital expenditures of $4.0 million, partly offset by proceeds from asset sales of $151,000. Cash used in investing activities of $5.7 million for fiscal 2004 consisted of payments for capital expenditures, partially offset by proceeds from sales of assets of $54,000. Cash provided by investing activities for fiscal 2003 consisted of proceeds from sales of assets of $9.5 million, partially offset by capital expenditures of $3.4 million.

      Cash provided by financing activities of $46.6 million for fiscal 2005 consisted of net proceeds of $43.9 million from the sale of $46 million principal amount of convertible senior notes and proceeds of $3.1 million from the exercise of stock options and warrants, partially offset by debt issuance costs of $433,000. Cash provided by financing activities for fiscal 2004 consisted of proceeds of $12.5 million from the exercise of stock options and warrants, partially offset by deferred financing costs paid. Cash provided by financing activities of $192.4 million for fiscal 2003 included net transfers from Conexant of $186.6 million, including a cash contribution of approximately $94.9 million in connection with the distribution. Cash

provided by financing activities for fiscal 2003 also included proceeds of $6.1 million from the exercise of stock options and warrants, partially offset by deferred financing costs paid.

      In December 2004, we sold $46.0 million aggregate principal amount of Convertible Senior Notes due 2009 for net proceeds (after discounts and commissions) of approximately $43.9 million. The notes are senior unsecured obligations, ranking equal in right of payment with all future unsecured indebtedness. The notes bear interest at a rate of 3.75%, payable semiannually in arrears each May 18 and November 18. We used approximately $3.3 million of the proceeds to purchase U.S. government securities that were pledged to the trustee for the payment of the first four scheduled interest payments on the notes when due. We made the first scheduled interest payment on May 18, 2005.

      The notes are convertible, at the option of the holder, at any time prior to maturity into shares of our common stock. Upon conversion, we may, at our option, elect to deliver cash in lieu of shares of our common stock or a combination of cash and shares of common stock. Effective May 13, 2005, the conversion price of the notes was adjusted to $2.31 per share of common stock, which is equal to a conversion rate of approximately 432.9004 shares of common stock per $1,000 principal amount of notes. Prior to this adjustment, the conversion price applicable to the notes was $2.81 per share of common stock, which was equal to approximately 355.8719 shares of common stock per $1,000 principal amount of notes. The adjustment was made pursuant to the terms of the indenture governing the notes. The conversion price is subject to further adjustment under the terms of the indenture to reflect stock dividends, stock splits, issuances of rights to purchase shares of common stock and certain other events.

      If we undergo certain fundamental changes (as defined in the indenture), holders of notes may require us to repurchase some or all of their notes at 100% of the principal amount plus accrued and unpaid interest. If, upon notice of certain events constituting a fundamental change, holders of the notes elect to convert the notes, we will be required to increase the number of shares issuable upon conversion by up to 78.9 shares per $1,000 principal amount of notes. The number of additional shares, if any, will be determined by the table set forth in the indenture governing the notes. In the event of a non-stock change of control constituting a “public acquirer change of control” (as defined in the indenture), we may, in lieu of issuing additional shares or making an additional cash payment upon conversion as required by the indenture, elect to adjust the conversion price and the related conversion obligation such that the noteholders will be entitled to convert their notes into a number of shares of public acquirer common stock.

      For financial accounting purposes, our contingent obligation to issue additional shares or make an additional cash payment upon conversion following a fundamental change is an “embedded derivative.” As of September 30, 2005, the estimated fair value of our liability under the fundamental change adjustment was not significant.

      In connection with the sale of the notes, we granted the purchasers certain registration rights. Our Form S-3 registration statement covering the resale of the notes and the sale of shares issuable upon conversion of the notes was declared effective by the SEC on April 6, 2005.

      Upon completion of the sale of the notes, the $50 million Credit Agreement with Conexant was terminated. We had made no borrowings under the credit facility, and no portion of a warrant related to the credit facility is, or will become, exercisable.

      In the distribution, we issued to Conexant a warrant to purchase 30 million shares of our common stock at a price of $3.408 per share, exercisable for a period of ten years after the distribution. The warrant contains antidilution provisions that provide for adjustment of the exercise price, and the number of shares issuable under the warrant, upon the occurrence of certain events. If we issue, or are deemed to have issued, shares of our common stock, or securities convertible into our common stock, at prices below the current market price of our common stock (as defined in the warrants) at the time of the issuance of such securities, the warrant’s

exercise price will be reduced and the number of shares issuable under the warrant will be increased. The amount of such adjustment, if any, will be determined pursuant to a formula specified in the warrant and will depend on the number of shares issued, the offering price and the current market price of our common stock at the time of the issuance of such securities. Adjustments to the warrant pursuant to these antidilution provisions may result in significant dilution to the interests of our existing stockholders and may adversely affect the market price of our common stock. The antidilution provisions may also limit our ability to obtain additional financing on terms favorable to us.

      Moreover, we may not realize any cash proceeds from the exercise of the warrant held by Conexant. A holder of the warrant may opt for a cashless exercise of all or part of the warrant. In a cashless exercise, the holder of the warrant would make no cash payment to us and would receive a number of shares of our common stock having an aggregate value equal to the excess of the then-current market price of the shares of our common stock issuable upon exercise of the warrant over the exercise price of the warrant. Such an issuance of common stock would be immediately dilutive to the interests of other stockholders.

      Our principal sources of liquidity are our existing cash balances, marketable securities and cash generated from product sales. As of September 30, 2005, our cash and cash equivalents totaled $15.3 million and our marketable securities totaled $40.9 million. Our working capital at September 30, 2005 was $59.3 million.

      In order to achieve profitability, or to generate positive cash flows from operations, we must achieve substantial revenue growth. Our ability to achieve the necessary revenue growth will depend on increased demand for network infrastructure equipment that incorporates our products, which in turn depends primarily on the level of capital spending by communications service providers and enterprises. Through fiscal 2005, we have completed a series of cost reduction actions which have improved our operating cost structure. However, these expense reductions alone, without additional revenue growth, will not make us profitable. We expect to continue to incur significant losses and negative cash flows at least through the first half of fiscal 2006 and we may incur additional significant losses and negative cash flows in subsequent periods.

      We believe that our existing sources of liquidity, along with cash expected to be generated from product sales, will be sufficient to fund our operations, research and development efforts, anticipated capital expenditures, working capital and other financing requirements for at least the next twelve months. We will need to continue a focused program of capital expenditures to meet our research and development and corporate requirements. We may also consider acquisition opportunities to extend our technology portfolio and design expertise and to expand our product offerings. In order to fund capital expenditures, increase our working capital or complete any acquisitions, we may seek to obtain additional debt or equity financing. We may also need to seek to obtain additional debt or equity financing if we experience downturns or cyclical fluctuations in our business that are more severe or longer than anticipated or if we fail to achieve anticipated revenue and expense levels. However, we cannot assure you that such financing will be available to us on favorable terms, or at all.

Contractual Obligations

      The following table summarizes the future payments we are required to make under contractual obligations as of September 30, 2005:

      Long-term debt consists of $46.0 million aggregate principal amount of our Convertible Senior Notes. The notes bear interest at a rate of 3.75%, payable semiannually in arrears each May 18 and November 18, and mature on November 18, 2009. U.S. Treasury securities having an aggregate face amount of approximately $2.6 million are pledged to the trustee for the payment of the next three scheduled interest payments on the notes when due.

      In March 2005, we amended and restated the Sublease with Conexant pursuant to which we lease our headquarters in Newport Beach, California. The Sublease has an initial term extending through June 2008, and we may, at our option, extend the Sublease for an additional two-year term. Rent payable under the Sublease is approximately $3.9 million annually, subject to annual increases of 3%, plus a prorated portion of operating expenses associated with the leased property. We estimate our minimum future obligation under the Sublease at approximately $6.2 million annually (a total of $17.2 million over the remainder of the initial lease term), but actual costs under the Sublease will vary based upon Conexant’s actual costs. In addition, each year we may elect to purchase certain services from Conexant based on a prorated portion of Conexant’s actual costs.

      We lease our other facilities and certain equipment under non-cancelable operating leases. The leases expire at various dates through 2014 and contain various provisions for rental adjustments, including, in certain cases, adjustments based on increases in the Consumer Price Index. The leases generally contain renewal provisions for varying periods of time. Contractual obligations under operating leases have not been reduced by anticipated rental income under noncancelable subleases totaling $2.4 million and extending to various dates through fiscal 2008.

Off-Balance Sheet Arrangements

      We have made guarantees and indemnities, under which we may be required to make payments to a guaranteed or indemnified party, in relation to certain transactions. In connection with the distribution, we generally assumed responsibility for all contingent liabilities and then-current and future litigation against Conexant or its subsidiaries related to the Mindspeed business. We may also be responsible for certain federal income tax liabilities under the Tax Allocation Agreement between us and Conexant, which provides that we will be responsible for certain taxes imposed on us, Conexant or Conexant stockholders. In connection with certain facility leases, we have indemnified our lessors for certain claims arising from the facility or the lease. We indemnify our directors, officers, employees and agents to the maximum extent permitted under the laws of the State of Delaware. The duration of the guarantees and indemnities varies, and in many cases is indefinite. The majority of our guarantees and indemnities do not provide for any limitation of the maximum potential future payments we could be obligated to make. We have not recorded any liability for these guarantees and indemnities in the accompanying consolidated balance sheets.

      Our cash and cash equivalents consist of demand deposits and highly-liquid money market funds. Our marketable securities consist of auction rate securities whose interest rates reset periodically (generally every seven or twenty-eight days) and U.S. Treasury securities having maturities of less than eighteen months. Our main investment objectives are the preservation of investment capital and the maximization of after-tax returns on our investment portfolio. Consequently, we invest in the securities that meet high credit quality standards and we limit the amount of our credit exposure to any one issuer. We do not use derivative instruments for speculative or investment purposes.

          Interest Rate Risk

      Our cash and cash equivalents and marketable securities are not subject to significant interest rate risk due to the short maturities or variable interest rate characteristics of these instruments. As of September 30, 2005, the carrying value of our cash and cash equivalents and marketable securities approximates fair value.

      Our long-term debt consists of convertible senior notes which bear interest at a fixed rate of 3.75%. Consequently, our results of operations and cash flows are not subject to any significant interest rate risk relating to our long-term debt.

          Foreign Exchange Risk

      We transact business in various foreign currencies and we face foreign exchange risk on assets and liabilities that are denominated in foreign currencies. The majority of our foreign exchange risks are not hedged; however, from time to time, we may utilize foreign currency forward exchange contracts to hedge a portion of our exposure to foreign exchange risk. These hedging transactions are intended to offset the gains and losses we experience on foreign currency transactions with gains and losses on the forward contracts, so as to mitigate our overall risk of foreign exchange gains and losses. We do not enter into forward contracts for speculative or trading purposes. At September 30, 2005, we held no foreign currency forward exchange contracts. Based on our overall currency rate exposure at September 30, 2005, a 10% change in currency rates would not have a material effect on our consolidated financial position, results of operations or cash flows.

MINDSPEED TECHNOLOGIES, INC.

CONSOLIDATED BALANCE SHEETS

See accompanying notes to consolidated financial statements.

MINDSPEED TECHNOLOGIES, INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

See accompanying notes to consolidated financial statements.

MINDSPEED TECHNOLOGIES, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

See accompanying notes to consolidated financial statements.