10-Q
Table of Contents

 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
___________________________________________
FORM 10-Q
___________________________________________
(Mark One)
x
QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the quarterly period ended March 31, 2016
or
¨
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from                      to                     
Commission File Number: 000-20278
___________________________________________
ENCORE WIRE CORPORATION
(Exact name of registrant as specified in its charter)
___________________________________________
Delaware
 
75-2274963
(State or other jurisdiction of
incorporation or organization)
 
(I.R.S. Employer
Identification No.)
 
 
 
1329 Millwood Road
McKinney, Texas
 
75069
(Address of principal executive offices)
 
(Zip Code)
Registrant’s telephone number, including area code: (972) 562-9473
N/A
(Former name, former address and former fiscal year, if changed since last report)
___________________________________________
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.     Yes  x    No  ¨
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  x    No  ¨
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.
Large accelerated filer
x
Accelerated filer
¨
 
 
 
 
Non-accelerated filer
¨  (Do not check if a smaller reporting company)
Smaller reporting company
¨
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).       Yes  ¨    No  x
Number of shares of Common Stock, par value $0.01, outstanding as of April 29, 2016: 20,693,761
 



ENCORE WIRE CORPORATION
FORM 10-Q
FOR THE QUARTER ENDED MARCH 31, 2016
Table of Contents
 
Page No.
 
 
 



Table of Contents

PART I—FINANCIAL INFORMATION
Item 1. Financial Statements.
Encore Wire Corporation
Consolidated Balance Sheets
As of March 31, 2016 and December 31, 2015
(In thousands, except share and per share data)
 
March 31, 2016
 
December 31, 2015
 
(Unaudited)
 
(See Note)
Assets
 
 
 
Current assets:
 
 
 
Cash and cash equivalents
$
78,561

 
$
79,152

Accounts receivable, net of allowance of $2,065 and $2,065
175,215

 
186,065

Inventories
98,472

 
95,254

Income tax receivable
2,361

 
7,344

Prepaid expenses and other
1,792

 
2,340

Total current assets
356,401

 
370,155

 
 
 
 
Property, plant and equipment—at cost:
 
 
 
Land and land improvements
50,635

 
50,580

Construction-in-progress
23,332

 
33,942

Buildings and improvements
121,080

 
102,432

Machinery and equipment
276,776

 
274,755

Furniture and fixtures
9,114

 
9,012

Total property, plant and equipment
480,937

 
470,721

 
 
 
 
Accumulated depreciation
(220,686
)
 
(215,953
)
Property, plant and equipment – net
260,251

 
254,768

 
 
 
 
Other assets
3,192

 
3,193

Total assets
$
619,844

 
$
628,116

 
 
 
 
Liabilities and Stockholders’ Equity
 
 
 
Current liabilities:
 
 
 
Trade accounts payable
$
21,579

 
$
28,743

Accrued liabilities
16,704

 
25,499

Deferred income taxes
7,920

 
8,473

Total current liabilities
46,203

 
62,715

 
 
 
 
Non-current deferred income taxes
26,347

 
26,762

Commitments and contingencies


 


 
 
 
 
Stockholders’ equity:
 
 
 
Preferred stock, $.01 par value:
 
 
 
Authorized shares – 2,000,000; none issued

 

Common stock, $.01 par value:
 
 
 
Authorized shares – 40,000,000;
 
 
 
Issued shares – 26,721,216 and 26,715,216
267

 
267

Additional paid-in capital
53,494

 
53,024

Treasury stock, at cost – 6,027,455 and 6,027,455 shares
(91,056
)
 
(91,056
)
Retained earnings
584,589

 
576,404

Total stockholders’ equity
547,294

 
538,639

Total liabilities and stockholders’ equity
$
619,844

 
$
628,116

Note:    The consolidated balance sheet at December 31, 2015, as presented, is derived from the audited consolidated financial statements at that date.
See accompanying notes.

1

Table of Contents

Encore Wire Corporation
Consolidated Statements of Income
Unaudited for the Three Months Ended March 31, 2016 and 2015
(In thousands, except per share data)
 
 
Three Months Ended March 31,
 
 
2016
 
2015
 
 
 
 
 
Net sales
 
$
225,544

 
$
250,262

Cost of goods sold
 
195,401

 
217,832

Gross profit
 
30,143

 
32,430

 
 
 
 
 
Selling, general, and administrative expenses
 
17,309

 
16,031

Operating income
 
12,834

 
16,399

 
 
 
 
 
Net interest and other expenses
 
(3
)
 
(100
)
Income before income taxes
 
12,837

 
16,499

 
 
 
 
 
Provision for income taxes
 
4,238

 
5,710

Net income
 
$
8,599

 
$
10,789

Earnings per common and common equivalent share – basic
 
$
0.42

 
$
0.52

Weighted average common and common equivalent shares outstanding – basic
 
20,688

 
20,725

Earnings per common and common equivalent share – diluted
 
$
0.41

 
$
0.52

Weighted average common and common equivalent shares outstanding – diluted
 
20,747

 
20,782

Cash dividends declared per share
 
$
0.02

 
$
0.02

See accompanying notes.


2

Table of Contents

Encore Wire Corporation
Consolidated Statements of Cash Flow
Unaudited for the Three Months Ended March 31, 2016 and 2015
(In thousands)
 
Three Months Ended March 31,
 
2016
 
2015
 
 
 
 
Operating Activities
 
 
 
Net income
$
8,599

 
$
10,789

Adjustments to reconcile net income to net cash
provided by (used in) operating activities:
 
 
 
Depreciation and amortization
4,846

 
3,897

Deferred income taxes
(968
)
 
(352
)
Excess tax benefits of options exercised
(24
)
 

Stock-based compensation
639

 
220

Other
(16
)
 
(43
)
Changes in operating assets and liabilities:
 
 
 
Accounts receivable
10,850

 
11,337

Inventories
(3,218
)
 
(7,103
)
Trade accounts payable and accrued liabilities
(17,913
)
 
(13,935
)
Other assets and liabilities
537

 
1,128

Current income taxes receivable / payable
5,007

 
3,409

Net cash provided by (used in) operating activities
8,339

 
9,347

 
 
 
 
Investing Activities
 
 
 
Purchases of property, plant and equipment
(8,658
)
 
(10,488
)
Proceeds from sale of assets
4

 

Net cash provided by (used in) investing activities
(8,654
)
 
(10,488
)
 
 
 
 
Financing Activities
 
 
 
Proceeds from issuance of common stock, net
114

 
161

Dividends paid
(414
)
 
(415
)
Excess tax benefits of options exercised
24

 

Net cash provided by (used in) financing activities
(276
)
 
(254
)
 
 
 
 
Net increase (decrease) in cash and cash equivalents
(591
)
 
(1,395
)
Cash and cash equivalents at beginning of period
79,152

 
54,664

Cash and cash equivalents at end of period
$
78,561

 
$
53,269

See accompanying notes.


3

Table of Contents

ENCORE WIRE CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(Unaudited)
March 31, 2016
NOTE 1 – BASIS OF PRESENTATION
The unaudited consolidated financial statements of Encore Wire Corporation (the “Company”) have been prepared in accordance with U.S. generally accepted accounting principles for interim information and the instructions to Form 10-Q and Rule 10-01 of Regulation S-X. Accordingly, they do not include all of the information and footnotes required by U.S. generally accepted accounting principles for complete annual financial statements. In the opinion of management, all adjustments, consisting only of normal recurring adjustments considered necessary for a fair presentation, have been included. Results of operations for interim periods presented do not necessarily indicate the results that may be expected for the entire year. These financial statements should be read in conjunction with the audited consolidated financial statements and notes thereto included in the Company’s Annual Report on Form 10-K for the year ended December 31, 2015.
NOTE 2 – INVENTORIES
Inventories are stated at the lower of cost, determined by the last-in, first-out (LIFO) method, or market.
Inventories consist of the following:
In Thousands
March 31, 2016
 
December 31, 2015
 
 
 
 
Raw materials
$
22,336

 
$
26,245

Work-in-process
28,783

 
20,155

Finished goods
71,029

 
70,348

Total
122,148

 
116,748

Adjust to LIFO cost
(23,676
)
 
(21,494
)
Lower of cost or market adjustment

 

Inventory, net
$
98,472

 
$
95,254

LIFO pools are established at the end of each fiscal year. During the first three quarters of every year, LIFO calculations are based on the inventory levels and costs at that time. Accordingly, interim LIFO balances will fluctuate up and down depending on those inventory levels and costs.
In the first quarter of 2016, a LIFO adjustment was recorded, increasing cost of sales by $2.2 million, versus a LIFO adjustment decreasing cost of sales by $9.3 million in the first quarter of 2015.
During the first three months of 2016, the Company liquidated a portion of the LIFO inventory layer in the aluminum wire pool established in prior years. This liquidation had an insignificant effect on the net income of the Company. During the first three months of 2015, the Company did not liquidate any LIFO inventory layers established in prior years.
NOTE 3 – ACCRUED LIABILITIES
Accrued liabilities consist of the following:
In Thousands
March 31, 2016
 
December 31, 2015
 
 
 
 
Sales volume discounts payable
$
9,063

 
$
13,193

Property taxes payable
869

 
3,444

Commissions payable
2,106

 
1,939

Accrued salaries
3,216

 
5,801

Other accrued liabilities
1,450

 
1,122

Total accrued liabilities
$
16,704

 
$
25,499


4

Table of Contents

NOTE 4 – INCOME TAXES
Income taxes were accrued at an effective rate of 33.0% in the first quarter of 2016 versus 34.6% in the first quarter of 2015, consistent with the Company’s estimated liabilities. The decrease in the effective rate was due to a change in the proportional effects of permanent differences between transactions reported for financial reporting and tax purposes.
NOTE 5 – EARNINGS PER SHARE
Net earnings (loss) per common and common equivalent share are computed using the weighted average number of shares of common stock and common stock equivalents outstanding during each period. If dilutive, the effect of stock options, treated as common stock equivalents, is calculated using the treasury stock method.
The following table sets forth the computation of basic and diluted net earnings per share:
 
Quarters Ended
In Thousands
March 31, 2016

March 31, 2015
 
 
 
 
Numerator:



Net income
$
8,599

 
$
10,789

 
 
 
 
Denominator:
 
 
 
Denominator for basic earnings per share – weighted average shares
20,688

 
20,725

 
 
 
 
Effect of dilutive securities:
 

 
Employee stock options
59


57

 
 
 
 
Denominator for diluted earnings per share – weighted average shares
20,747

 
20,782

The weighted average of employee stock options excluded from the determination of diluted net income per common and common equivalent share for the first quarter was 187,000 in 2016 and 140,000 in 2015. Such options were anti-dilutive for the respective periods.

NOTE 6 – DEBT
The Company is party to a Credit Agreement (the “Credit Agreement”) with two banks, Bank of America, N.A., as administrative agent and letter of credit issuer, and Wells Fargo Bank, National Association, as syndication agent. The Credit Agreement extends through October 1, 2017 and provides for maximum borrowings of the lesser of $150.0 million or the amount of eligible accounts receivable plus the amount of eligible finished goods and raw materials, less any reserves established by the banks. Additionally, at our request and subject to certain conditions, the commitments under the Credit Agreement may be increased by a maximum of up to $100.0 million as long as existing or new lenders agree to provide such additional commitments. The calculated maximum borrowing amount available at March 31, 2016, as computed under the Credit Agreement, was $149.3 million. Borrowings under the line of credit bear interest, at the Company’s option, at either (1) LIBOR plus a margin that varies from 0.875% to 1.75% depending upon the Leverage Ratio (as defined in the Credit Agreement), or (2) the base rate (which is the highest of the federal funds rate plus 0.5%, the prime rate, or LIBOR plus 1.0%) plus 0% to 0.25% (depending upon the Leverage Ratio). A commitment fee ranging from 0.15% to 0.30% (depending upon the Leverage Ratio) is payable on the unused line of credit. At March 31, 2016, there were no borrowings outstanding under the Credit Agreement. Obligations under the Credit Agreement are the only contractual borrowing obligations or commercial borrowing commitments of the Company.
Obligations under the Credit Agreement are unsecured and contain customary covenants and events of default. The Company was in compliance with the covenants as of March 31, 2016.
NOTE 7 – STOCKHOLDERS’ EQUITY
On November 10, 2006, the Board of Directors approved a stock repurchase program authorizing the Company to repurchase up to an authorized amount of shares of its common stock on the open market or through privately negotiated transactions at prices determined by the President of the Company during the term of the program. The Company’s Board of Directors has authorized several increases and annual extensions of this stock repurchase program, and as of March 31, 2016, the repurchase authorization

5

Table of Contents

had 1,132,946 shares remaining authorized through March 31, 2017. The Company did not repurchase any shares of its stock in the first quarter of 2016 or 2015. Other than net income, there was no material change in stockholders' equity during the first quarter of 2016 or 2015.
NOTE 8 - CONTINGENCIES

The Company is from time to time involved in litigation, certain other claims and arbitration matters arising in the ordinary course of its business. The Company accrues for a liability when it is both probable that a liability has been incurred and the amount of the loss can be reasonably estimated. Significant judgment is required in both the determination of the probability of a loss and the determination as to whether a loss is reasonably estimable. Any such accruals are reviewed at least quarterly and adjusted to reflect the effects of negotiations, settlements, rulings, advice of legal counsel and technical experts and other information and events pertaining to a particular matter. To the extent there is a reasonable possibility (within the meaning of ASC 450) that probable losses could exceed amounts already accrued, if any, and the additional loss or range of loss is able to be estimated, management discloses the additional loss or range of loss.

For matters where the Company has evaluated that a loss is not probable, but is reasonably possible, the Company will disclose an estimate of the possible loss or range of loss or make a statement that such an estimate cannot be made. In some instances, for reasonably possible losses, the Company cannot estimate the possible loss or range of loss. The nature and progression of litigation can make it difficult to predict the impact a particular lawsuit will have on the Company. There are many reasons that the Company cannot make these assessments, including, among others, one or more of the following: the early stages of a proceeding; damages sought that are unspecified, unsupportable, unexplained or uncertain; discovery is incomplete; the complexity of the facts that are in dispute; the difficulty of assessing novel claims; the parties not having engaged in any meaningful settlement discussions; the possibility that other parties may share in any ultimate liability; and/or the often slow pace of litigation.

On July 7, 2009, Southwire Company, a Delaware corporation (“Southwire”), filed a complaint for patent infringement against the Company and Cerro Wire, Inc. (“Cerro”) in the United States District Court for the Eastern District of Texas. In the complaint, Southwire alleged that the Company infringed one or more claims of United States Patent No. 7,557,301 (the “301 patent”), entitled “Method of Manufacturing Electrical Cable Having Reduced Required Force for Installation,” by making and selling electrical cables, including the Company’s Super Slick cables. The case has been transferred to the Northern District of Georgia and the parties have agreed to stay it pending reexamination of the ‘301 patent by the United States Patent and Trademark Office (the “USPTO”). On June 23, 2011, the USPTO issued an office action in the reexamination finally rejecting all the claims of the ‘301 patent. Southwire responded to these final rejections on August 8, 2011 by submitting substantially amended claims. The examiner determined that the amended claims captured patentable subject matter and on September 21, 2011 issued a notice that a reexamination certificate would be issued evidencing the patentability of the amended claims. The reexamination certificate was issued on the ‘301 patent on December 27, 2011. Subsequent to the issuance of the ‘301 reexamination certificate, a new inter partes reexamination proceeding was instituted by Cerro Wire against the reexamined ‘301 patent. The parties convened on March 21, 2012 and August 27, 2012 for settlement conferences regarding the ‘301 patent lawsuit. Such settlement conferences did not result in any negotiation, agreement, decision or other development that the Company believed is material to such lawsuit. Settlement discussions continue between the parties. On September, 29, 2015, the Patent Trial and Appeal Board (the “PTAB”) issued an opinion affirming the Examiner’s rejection of all of the claims of the ’301 Patent. Southwire intends to appeal this decision.

On July 2, 2010, the Company filed a complaint against Southwire in the Northern District of Georgia. The complaint alleged that Southwire was using a deceptively misdescriptive trademark on its SimPull products and that Southwire had made false statements about the Company’s Slick Wire products. Southwire’s United States Patent No. 7,749,024 (“the ‘024 patent”) issued on July 6, 2010. The morning the patent issued, the Company amended its complaint to seek a declaratory judgment that the Company’s Slick Wire products do not infringe the ‘024 patent. Later that same day, Southwire filed a separate complaint against the Company and Cerro Wire in the Eastern District of Texas alleging infringement of the ‘024 patent. The Company’s complaint against Southwire was stayed by agreement on April 11, 2011. The complaint filed by Southwire in the Eastern District of Texas has been voluntarily dismissed. On October 8, 2010, the Company filed a request with the USPTO for an inter partes reexamination of the ‘024 patent. On November 9, 2010, the USPTO ordered the reexamination of the ‘024 patent. On March 28, 2014, the PTAB issued its Decision on Appeal, and issued its Decision on the Request for Rehearing on November 3, 2014. Southwire and the Company each appealed the PTAB’s Decision to the Federal Circuit. Oral argument was held on October 7, 2015. On October 20, 2015, the Federal Circuit dismissed the appeal as moot because the Federal Circuit had the same day affirmed the rejection of all the claims of the ’024 patent in the Cerro reexamination. On March 16, 2016, all claims pertaining to the case were dismissed with prejudice by the United States District Court for the Northern District of Georgia.

With the exception of the issues related to the '024 patent just discussed, the potentially applicable factual and legal issues related to the above claims asserted against the Company have not been resolved. The Company disputes all of Southwire’s claims and

6

Table of Contents

alleged damages and intends to vigorously defend the lawsuits and vigorously pursue its own claims against Southwire if and when the litigation resumes.

At this time, given the status of the proceedings, the complexities of the facts in dispute and the multiple claims involved, the Company has not concluded that a probable loss exists with respect to the Southwire litigation. Accordingly, no accrual has been made. Additionally, given the aforementioned uncertainties, while it is reasonably possible we may incur a loss, the Company is unable to estimate any possible loss or range of losses for disclosure purposes.

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations.
Encore is a low-cost manufacturer of electrical building wire and cable. The Company is a significant supplier of building wire for interior electrical wiring in commercial and industrial buildings, homes, apartments, and manufactured housing.
The Company’s operating results in any given period are driven by several key factors, including the volume of product produced and shipped, the cost of copper and other raw materials, the competitive pricing environment in the wire industry and the resulting influence on gross margin and the efficiency with which the Company’s plants operate during the period, among others. Price competition for electrical wire and cable is intense, and the Company sells its products in accordance with prevailing market prices. Copper, a commodity product, is the principal raw material used by the Company in manufacturing its products. Copper accounted for approximately 72.1%, 74.7%, and 77.6% of the Company’s cost of goods sold during fiscal 2015, 2014 and 2013, respectively. The price of copper fluctuates depending on general economic conditions and in relation to supply and demand and other factors, which causes monthly variations in the cost of the Company’s purchased copper. Additionally, the SEC now allows shares of certain physically backed copper exchange-traded funds (“ETFs”) to be listed and publicly traded. Such funds and other copper ETFs like it hold copper cathode as collateral against their shares. The acquisition of copper cathode by copper ETFs may materially decrease or interrupt the availability of copper for immediate delivery in the United States, which could materially increase the Company’s cost of copper. In addition to rising copper prices and potential supply shortages, we believe that ETFs and similar copper-backed derivative products could lead to increased price volatility for copper. The Company cannot predict copper prices or the effect of fluctuations in the cost of copper on the Company’s future operating results. Wire prices can, and frequently do, change on a daily basis. This competitive pricing market for wire does not always mirror changes in copper prices, making margins highly volatile. With the Company’s expansion into aluminum conductors in some of its building wire products, we expect aluminum will slowly grow its percentage share of the raw materials cost for the Company. The Company built a plant to expand the production of aluminum building wire beginning in late 2011. The plant was fully operational by mid-year 2013. In 2012, aluminum wire sales constituted 3.6% of net sales, growing to 6.9% of net sales in 2013, 8.9% in 2014, and 9.9% in 2015. This growth of aluminum sales to over $103.4 million in 2014 provided the impetus for the Company to construct a 250,000 square foot expansion to the aluminum plant to allow for the continued growth of this business. The construction of the building expansion and the machinery and equipment installation was completed during the fourth quarter of 2015. Historically, the cost of aluminum has been much lower than copper and also less volatile. With the volatility of both raw material prices and wire prices in the Company’s end market, hedging raw materials can be risky. Historically, the Company has not engaged in hedging strategies for raw material purchases. The tables below highlight the range of closing prices of copper on the Comex exchange for the periods shown.

7

Table of Contents

COMEX COPPER CLOSING PRICE 2016

January 2016
 
February 2016
 
March 2016
 
Quarter Ended March 31, 2016
High
$
2.09

 
$
2.13

 
$
2.29

 
$
2.29

Low
1.94

 
2.00

 
2.14

 
1.94

Average
2.01

 
2.08

 
2.23

 
2.11

COMEX COPPER CLOSING PRICE 2015

January 2015
 
February 2015
 
March 2015
 
Quarter Ended March 31, 2015
High
$
2.84

 
$
2.72

 
$
2.82

 
$
2.84

Low
2.47

 
2.51

 
2.59

 
2.47

Average
2.65

 
2.62

 
2.71

 
2.66

The following discussion and analysis relates to factors that have affected the operating results of the Company for the quarters ended March 31, 2016 and 2015. Reference should also be made to the audited financial statements and notes thereto included in the Company’s Annual Report on Form 10-K for the year ended December 31, 2015.
Results of Operations
Quarter Ended March 31, 2016 Compared to Quarter Ended March 31, 2015
Net sales were $225.5 million in the first quarter of 2016 compared to $250.3 million in the first quarter of 2015. This 9.9% decrease in net sales is primarily the result of a 11.0% decrease in copper wire sales driven by a 15.4% decrease in the average selling price of copper wire, offset somewhat by a 5.2% increase in copper wire unit volume shipped. Additionally, there was a 1.0% increase in aluminum wire sales driven by an 11.6% increase in aluminum wire unit volume shipped, offset somewhat by a 9.5% decrease in the average selling price of aluminum wire. Unit volume is measured in pounds of copper or aluminum contained in the wire shipped during the period. Fluctuations in sales prices are primarily a result of changing copper and other raw material prices and product price competition. The average cost per pound of raw copper purchased decreased 20.7% in the first quarter of 2016 compared to the first quarter of 2015, and was the principal driver of the decreased average sales price of copper wire. In the first quarter of 2016, aluminum building wire constituted 10.5% of the Company’s net sales dollars compared to 9.4% in the first quarter of 2015.
Cost of goods sold was $195.4 million, or 86.6% of net sales, in the first quarter of 2016, compared to $217.8 million, or 87.0% of net sales, in the first quarter of 2015. Gross profit decreased to $30.1 million, or 13.4% of net sales, in the first quarter of 2016 versus $32.4 million, or 13.0% of net sales, in the first quarter of 2015.
The increase in gross profit margin percentage occurred despite decreased copper wire spreads. The spread between the average price paid for a pound of raw copper and the average sale price for a pound of copper decreased 4.2% in the first quarter of 2016 versus the first quarter of 2015. The spread decreased as a result of the average sales price per copper pound sold declining 15.4% while the per pound cost of raw copper decreased 20.7%. The aluminum wire spread also decreased 0.3% in the same quarterly comparison. However, total raw materials cost, including the LIFO adjustment, decreased to 73.3% of net sales in the first quarter of 2016, versus 76.1% of net sales in the first quarter of 2015. This decrease in total raw materials cost as a percentage of net sales, offset somewhat by the higher percentages of overhead cost, was the primary driver of the slightly enhanced gross profit margin percentage. Overheads contained some fixed and semi-fixed components which will rise as a percentage of sales when sales dollars decline.
Inventories are stated at the lower of cost, using the last-in, first out (LIFO) method, or market. The Company maintains two inventory pools for LIFO purposes. As permitted by U.S. generally accepted accounting principles, the Company maintains its inventory costs and cost of goods sold on a first-in, first-out (FIFO) basis and makes a monthly adjustment to adjust total inventory and cost of goods sold from FIFO to LIFO. The Company applies the lower of cost or market (LCM) test by comparing the LIFO cost of its raw materials, work-in-process and finished goods inventories to estimated market values, which are based primarily upon the most recent quoted market price of copper, aluminum and finished wire prices as of the end of each reporting period. The Company performs a lower of cost or market calculation quarterly. As of March 31, 2016, no LCM adjustment was required. However, decreases in copper and other material prices could necessitate establishing an LCM reserve in future periods. Additionally, future reductions in the quantity of inventory on hand could cause copper or other raw materials that are carried in

8

Table of Contents

inventory at costs different from the cost of copper and other raw materials in the period in which the reduction occurs to be included in costs of goods sold for that period at the different price.

Due primarily to decreases in copper costs, offset by price and volume movements of other materials, a LIFO adjustment was recorded, increasing cost of sales by $2.2 million during the first quarter of 2016. As discussed in Note 2 to the Company’s consolidated financial statements included in Item 1 to this report, during the first quarter of 2016, the Company liquidated a portion of the LIFO inventory layer in the aluminum wire pool established in prior years. The liquidation had an insignificant effect on the net income of the Company. Additionally, during the first quarter of 2015, a LIFO adjustment was recorded, decreasing cost of sales by $9.3 million.
Selling expenses, consisting of commissions and freight, for the first quarter of 2016 were $11.3 million, or 5.0% of net sales, compared to $11.6 million, or 4.7% of net sales, in the first quarter of 2015. Commissions paid to independent manufacturers’ representatives are paid as a relatively stable percentage of sales dollars, and therefore, exhibited little change in percentage terms. Freight costs as a percentage of net sales increased to 2.5% of net sales in the first quarter of 2016 from 2.3% of net sales in the first quarter of 2015, primarily due to small changes in the mix of products sold, fuel costs and the geographical distribution of product sold. General and administrative expenses for the first quarter of 2016 were $6.0 million, or 2.7% of net sales, compared to $4.4 million, or 1.8% of net sales, in the first quarter of 2015. General and administrative expenses rose primarily due to the increased depreciation of assets and, to a lesser extent, increased expense recognized for stock compensation in the first quarter of 2016. The provision for bad debts was $0 for the first quarter of 2016 and 2015.
Liquidity and Capital Resources
The Company maintains a substantial inventory of finished products to satisfy customers’ delivery requirements promptly. As is customary in the building wire industry, the Company provides payment terms to most of its customers that exceed terms that it receives from its suppliers. Copper suppliers generally give very short payment terms (less than 15 days) while the Company and the building wire industry give customers much longer terms. In general, the Company’s standard payment terms result in the collection of a significant majority of net sales within approximately 75 days of the date of invoice. As a result of this timing difference, building wire companies must have sufficient cash and access to capital resources to finance their working capital needs, thereby creating a barrier to entry for companies who do not have sufficient liquidity and capital resources. The two largest components of working capital, receivables and inventory, and to a lesser extent, capital expenditures, are the primary drivers of the Company’s liquidity needs. Generally, these needs will cause the Company’s cash balance to rise and fall inversely to the receivables and inventory balances. The Company’s receivables and inventories will rise and fall in concert with several factors, most notably the price of copper and other raw materials and the level of unit sales. Capital expenditures have historically been necessary to expand and update the production capacity of the Company’s manufacturing operations. The Company has historically satisfied its liquidity and capital expenditure needs with cash generated from operations and borrowings under its various debt arrangements. The Company historically uses its revolving credit facility to manage day to day operating cash needs as required by daily fluctuations in working capital, and has the facility in place should such a need arise in the future.
For more information on the Company’s revolving credit facility, see Note 6 to the Company’s consolidated financial statements included in Item 1 to this report, which is incorporated herein by reference.
Cash provided by operating activities was $8.3 million in the first three months of 2016 compared to cash provided of $9.3 million in the first three months of 2015. The following changes in components of cash flow from operations were notable. The Company had net income of $8.6 million in the first three months of 2016 versus net income of $10.8 million in the first three months of 2015. Accounts receivable decreased $10.9 million in the first three months of 2016 versus decreasing $11.3 million in the first three months of 2015. Accounts receivable generally fluctuate in proportion to dollar sales and to a lesser extent are affected by the timing of when sales occur during a given quarter. With an average of 60 to 75 days of sales outstanding, quarters in which sales are more back-end loaded will have higher accounts receivable balances outstanding at quarter-end. Inventory value increased in the first three months of both 2016 and 2015, resulting in a use of cash of $3.2 million and $7.1 million, respectively. Trade accounts payable and accrued liabilities were a use of cash of $17.9 million in 2016 versus a $13.9 million use of cash in 2015. In the first three months of 2016, changes in current and deferred taxes provided cash of $4.0 million versus cash provided of $3.1 million in the first three months of 2015. These changes in cash flow were the primary drivers of the $1.0 million decrease in cash provided by operations in the first three months of 2016 versus the first three months of 2015.
Cash used in investing activities decreased to $8.7 million in the first three months of 2016 from $10.5 million in the first three months of 2015. Cash used in financing activities consisted of $0.4 million of cash dividends paid offset by $0.1 million of proceeds from exercised stock options resulting in $0.3 million of cash used in the first three months of 2016 versus $0.3 million used in the first three months of 2015. As of March 31, 2016, the balance on the Company’s revolving line of credit remained at $0. The Company’s cash balance was $78.6 million at March 31, 2016 versus $53.3 million at March 31, 2015.

9

Table of Contents

During the remainder of 2016, the Company expects its capital expenditures will consist primarily of expenditures related to the purchases of manufacturing equipment throughout its facilities to update and address bottlenecks in these facilities. The total capital expenditures for all of 2016 associated with these projects are currently estimated to be between $42 million and $47 million. The Company also expects its future working capital requirements to fluctuate as a result of changes in unit sales volumes and the price of copper and other raw materials. The Company believes that the current cash balance, cash flow from operations, and the financing available from its revolving credit facility will satisfy anticipated working capital and capital expenditure requirements during 2016.
Information Regarding Forward-Looking Statements
This quarterly report on Form 10-Q contains various “forward-looking statements” (within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended) and information that is based on management’s belief as well as assumptions made by and information currently available to management. The words “believes”, “estimates”, “anticipates”, “plans”, “seeks”, “expects”, “intends” and similar expressions identify some of the forward-looking statements. Although the Company believes that the expectations reflected in such forward-looking statements are reasonable, it can give no assurance that such expectations will prove to have been correct. Such statements are subject to certain risks, uncertainties and assumptions. Should one or more of these risks or uncertainties materialize, or should underlying assumptions prove incorrect, actual results may vary materially from those expected. Among the key factors that may have a direct bearing on the Company’s operating results are fluctuations in the economy and in the level of activity in the building and construction industry, demand for the Company’s products, the impact of price competition and fluctuations in the price of copper and other raw materials. For more information regarding “forward-looking statements” see “Information Regarding Forward-Looking Statements” in Part II, Item 7 of the Company’s Annual Report on Form 10-K for the year ended December 31, 2015, which is hereby incorporated by reference.
Item 3. Quantitative and Qualitative Disclosures About Market Risk.
There have been no material changes from the information provided in Item 7A, “Quantitative and Qualitative Disclosures About Market Risk,” of the Company’s Annual Report on Form 10-K for the year ended December 31, 2015.
Item 4. Controls and Procedures.
The Company maintains controls and procedures designed to ensure that information required to be disclosed by it in the reports it files with or submits to the Securities and Exchange Commission (the “SEC”) is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms and to ensure that information required to be disclosed by the Company in such reports is accumulated and communicated to the Company’s management, including the Chief Executive and Chief Financial Officers, as appropriate, to allow timely decisions regarding required disclosure. Based on an evaluation of the Company’s disclosure controls and procedures (as such term is defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended) as of the end of the period covered by this report conducted by the Company’s management, with the participation of the Chief Executive and Chief Financial Officers, the Chief Executive and Chief Financial Officers concluded that the Company’s disclosure controls and procedures were effective to ensure that information required to be disclosed by the Company in the reports it files with or submits to the SEC is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms and to ensure that information required to be disclosed by the Company in such reports is accumulated and communicated to the Company’s management, including the Chief Executive and Chief Financial Officers, as appropriate, to allow timely decisions regarding required disclosure.
There have been no changes in the Company’s internal control over financial reporting or in other factors that have materially affected, or are reasonably likely to materially affect, internal control over financial reporting during the period covered by this report.

10

Table of Contents

PART II – OTHER INFORMATION
Item 1. Legal Proceedings.
For information on the Company’s legal proceedings, see Note 8 to the Company’s consolidated financial statements included in Item 1 to this report and incorporated herein by reference.
Item 1A. Risk Factors.
There have been no material changes to the Company’s risk factors as disclosed in Item 1A, “Risk Factors,” in the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2015.
Item 2. Unregistered Sales of Equity Securities and Use of Proceeds.
Note 7 to the Company’s consolidated financial statements included in Item 1 to this report is hereby incorporated herein by reference.
Item 6. Exhibits.
The information required by this Item 6 is set forth in the Index to Exhibits accompanying this Form 10-Q and incorporated herein by reference.


11

Table of Contents

SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.
 
 
ENCORE WIRE CORPORATION
 
(Registrant)
 
 
Dated: May 4, 2016
/s/ DANIEL L. JONES
 
Daniel L. Jones
Chairman, President and Chief Executive Officer
 
 
Dated: May 4, 2016
/s/ FRANK J. BILBAN
 
Frank J. Bilban
Vice President-Finance, Treasurer,
Secretary and Chief Financial Officer

12

Table of Contents

INDEX TO EXHIBITS
 
Exhibit
Number
Description
3.1
Certificate of Incorporation of Encore Wire Corporation and all amendments thereto (filed as Exhibit 3.1 to the Company’s Quarterly Report on Form 10-Q for the quarter ended March 31, 2009, and incorporated herein by reference).
3.2
Third Amended and Restated Bylaws of Encore Wire Corporation, as amended through February 27, 2012 (filed as Exhibit 3.2 to the Company’s Annual Report on Form 10-K for the year ended December 31, 2011, and incorporated herein by reference).
4.1
Form of certificate for Common Stock (filed as Exhibit 1 to the Company’s registration statement on Form 8-A, filed with the SEC on June 4, 1992, and incorporated herein by reference).
31.1
Certification by Daniel L. Jones, Chairman, President and Chief Executive Officer of the Company, dated May 4, 2016 and submitted pursuant to Rule 13a-14(a)/15d-14(a) and pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
31.2
Certification by Frank J. Bilban, Vice President – Finance, Treasurer, Secretary and Chief Financial Officer of the Company, dated May 4, 2016 and submitted pursuant to Rule 13a-14(a)/15d-14(a) and pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
32.1
Certification by Daniel L. Jones, Chairman, President and Chief Executive Officer of the Company, dated May 4, 2016 as required by 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
32.2
Certification by Frank J. Bilban, Vice President – Finance, Treasurer, Secretary and Chief Financial Officer of the Company, dated May 4, 2016 as required by 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
101.INS
XBRL Instance Document
101.SCH
XBRL Taxonomy Extension Schema Document
101.CAL
XBRL Taxonomy Extension Calculation Linkbase Document
101.DEF
XBRL Taxonomy Extension Definition Linkbase Document
101.LAB
XBRL Taxonomy Extension Label Linkbase Document
101.PRE
XBRL Taxonomy Extension Presentation Linkbase Document


13