SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

 

FORM 10-K

 

FOR ANNUAL AND TRANSITION REPORTS

PURSUANT TO SECTION 13 OR 15(d) THE SECURITIES EXCHANGE ACT OF 1934

 

(Mark One)

Ö  ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2016

 

OR

 

   TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from ____________ to ___________

 

Commission File Number 0-4776

 

STURM, RUGER & COMPANY, INC.

(Exact Name of Registrant as Specified in Its Charter)

 

Delaware

(State or Other Jurisdiction of

Incorporation or Organization)

06-0633559

(I.R.S. Employer

Identification No.)

 

Lacey Place, Southport, Connecticut

(Address of Principal Executive Offices)

06890

(Zip Code)

 

(203) 259-7843

(Registrant’s telephone number, including area code)

 

Securities registered pursuant to Section 12(b) of the Act:

 

Title of Each Class

Common Stock, $1 par value

Name of Each Exchange on Which Registered

New York Stock Exchange

 

Securities registered pursuant to Section 12(g) of the Act:

None

(Title of Class)

 

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  YES  Ö NO    

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. YES      NO Ö  

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. YES Ö NO       

 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K [ _ ].

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer. See definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act. Large accelerated filer [ Ö ] Accelerated filer [  ] Non-accelerated filer [  ] Smaller reporting company [  ].

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).YES      NO Ö  

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).

YES Ö  NO       

 

The aggregate market value of the voting and non-voting common equity held by non-affiliates of the registrant computed by reference to the price at which the common equity was last sold, or the average bid and asked price of such common equity, as of June 30, 2016:

Common Stock, $1 par value - $1,192,892,000

 

The number of shares outstanding of the registrant's common stock as of February 17, 2017:

Common Stock, $1 par value – 18,104,900 shares

 

DOCUMENTS INCORPORATED BY REFERENCE.

 

Portions of the registrant’s Proxy Statement relating to the 2017 Annual Meeting of Stockholders to be held May 9, 2017 are incorporated by reference into Part III (Items 10 through 14) of this Report.

1 

 

 

 

TABLE OF CONTENTS

 

  PART I  
     
Item 1. Business  4
     
Item 1A. Risk Factors 10
     
Item 1B. Unresolved Staff Comments 14
     
Item 2. Properties 15
     
Item 3. Legal Proceedings 16
     
Item 4. Mine Safety Disclosures 16
     
  PART II  
     
Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities 17
     
Item 6. Selected Financial Data 21
     
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations 22
     
Item 7A. Quantitative and Qualitative Disclosures About Market Risk 46
     
Item 8. Financial Statements and Supplementary Data 47
     
Item 9. Changes in and Disagreements With Accountants on Accounting and Financial Disclosure 74
     
Item 9A. Controls and Procedures 74
     
Item 9B. Other Information 75
     
  PART III  
     
Item 10. Directors, Executive Officers and Corporate Governance 75
     
Item 11. Executive Compensation 75
     
Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder  Matters 75
     
Item 13. Certain Relationships and Related Transactions, and Director Independence 76
     
Item 14. Principal Accountant Fees and Services 76
     

2 

Table of Contents 

 

  PART IV  
     
Item 15. Exhibits and Financial Statement Schedules 77
     
Signatures   81
Exhibit Index 82
Financial Statement Schedule. 87
Exhibits   88

 

 

 

 

 

EXPLANATORY NOTE:

 

 

In this Annual Report on Form 10-K, Sturm, Ruger & Company, Inc. and Subsidiary (the “Company”) makes forward-looking statements and projections concerning future expectations. Such statements are based on current expectations and are subject to certain qualifying risks and uncertainties, such as market demand, sales levels of firearms, anticipated castings sales and earnings, the need for external financing for operations or capital expenditures, the results of pending litigation against the Company, the impact of future firearms control and environmental legislation, and accounting estimates, any one or more of which could cause actual results to differ materially from those projected. Words such as “expect,” “believe,” “anticipate,” “intend,” “estimate,” “will,” “should,” “could” and other words and terms of similar meaning, typically identify such forward-looking statements. Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date made. The Company undertakes no obligation to publish revised forward-looking statements to reflect events or circumstances after the date such forward-looking statements are made or to reflect the occurrence of subsequent unanticipated events.

3 

Table of Contents 

 

PART I

 

ITEM 1—BUSINESS

 

Company Overview

Sturm, Ruger & Company, Inc. and Subsidiary (the “Company”) is principally engaged in the design, manufacture, and sale of firearms to domestic customers. Virtually all of the Company’s sales for the year ended December 31, 2016 were from the firearms segment, with approximately 1% from the castings segment. Export sales represent approximately 3% of firearms sales. The Company’s design and manufacturing operations are located in the United States and almost all product content is domestic.

 

The Company has been in business since 1949 and was incorporated in its present form under the laws of Delaware in 1969. The Company primarily offers products in three industry product categories – rifles, pistols, and revolvers. The Company’s firearms are sold through independent wholesale distributors, principally to the commercial sporting market.

 

The Company manufactures and sells investment castings made from steel alloys and metal injection molding (“MIM”) parts for internal use in the firearms segment and has minimal sales to outside customers. The castings and MIM parts sold to outside customers, either directly or through manufacturers’ representatives, represented approximately 1% of the Company’s total sales for the year ended December 31, 2016.

 

For the years ended December 31, 2016, 2015, and 2014, net sales attributable to the Company's firearms operations were $658.4 million, $544.9 million and $542.3 million. The balance of the Company's net sales for the aforementioned periods was attributable to its castings operations.

 

Firearms Products

The Company presently manufactures firearm products, under the “Ruger” name and trademark, in the following industry categories:

 

Rifles   Revolvers
· Single-shot   · Single-action
· Autoloading   · Double-action
· Bolt-action      
· Modern sporting      
         
Pistols      
· Rimfire autoloading      
· Centerfire autoloading      

 

Most firearms are available in several models based upon caliber, finish, barrel length, and other features.

4 

Table of Contents 

 

Rifles

A rifle is a long gun with spiral grooves cut into the interior of the barrel to give the bullet a stabilizing spin after it leaves the barrel. Net sales of rifles by the Company accounted for $264.9 million, $208.5 million, and $203.9 million of total net sales for the years 2016, 2015, and 2014, respectively.

 

Pistols

A pistol is a handgun in which the ammunition chamber is an integral part of the barrel and which typically is fed ammunition from a magazine contained in the grip. Net sales of pistols by the Company accounted for $250.0 million, $192.2 million, and $198.2 million of revenues for the years 2016, 2015, and 2014, respectively.

 

Revolvers

A revolver is a handgun that has a cylinder that holds the ammunition in a series of chambers which are successively aligned with the barrel of the gun during each firing cycle. There are two general types of revolvers, single-action and double-action. To fire a single-action revolver, the hammer is pulled back to cock the gun and align the cylinder before the trigger is pulled. To fire a double-action revolver, a single trigger pull advances the cylinder and cocks and releases the hammer. Net sales of revolvers by the Company accounted for $104.9 million, $113.3 million, and $112.8 million of revenues for the years 2016, 2015, and 2014, respectively.

 

Accessories

The Company also manufactures and sells accessories and replacement parts for its firearms. These sales accounted for $38.6 million, $30.3 million, and $23.9 million of total net sales for the years 2016, 2015, and 2014, respectively.

 

Castings Products

 

Net sales attributable to the Company’s casting operations (excluding intercompany transactions) accounted for $5.9 million, $6.2 million, and $2.2 million, for 2016, 2015, and 2014, respectively. These sales represented approximately 1% of total net sales in each of these years.

 

Manufacturing

 

Firearms

The Company produces one model of pistol, all of its revolvers and most of its rifles at the Newport, New Hampshire facility. Most of the Company’s pistols are produced at the Prescott, Arizona facility. Some rifle models and one pistol model are produced at the Mayodan, North Carolina facility, which began operations in the latter months of 2013.

 

Many of the basic metal component parts of the firearms manufactured by the Company are produced by the Company's castings segment through processes known as precision investment casting. The Company also uses many MIM parts in its firearms. See "Manufacturing- Investment Castings and Metal Injected Moldings" below for a description of these processes. The Company believes that investment castings and MIM parts provide greater design flexibility and result in component parts which are generally close to their ultimate shape and, therefore, require less machining than processes requiring machining a solid billet of metal to obtain a part.

5 

Table of Contents 

Through the use of investment castings and MIM parts, the Company endeavors to produce durable and less costly component parts for its firearms.

 

All assembly, inspection, and testing of firearms manufactured by the Company are performed at the Company's manufacturing facilities. Every firearm, including every chamber of every revolver manufactured by the Company, is test-fired prior to shipment.

 

Investment Castings and Metal Injected Moldings

To produce a product by the investment casting method, a wax model of the part is created and coated (“invested”) with several layers of ceramic material. The shell is then heated to melt the interior wax, which is poured off, leaving a hollow mold. To cast the desired part, molten metal is poured into the mold and allowed to cool and solidify. The mold is then broken off to reveal a near net shape cast metal part.

 

Metal injection molding is a three part powder metallurgy process by which a feedstock consisting of finely powdered metal and binders is processed through injection molding, debinding, and sintering equipment to produce steel, stainless steel, and alloy parts of complex shape and geometry.  This process allows for high volume production while eliminating many of the wastes of traditional metal working methods, yielding net shape and near net shape parts.

 

Marketing and Distribution

 

Firearms

The Company's firearms are primarily marketed through a network of federally licensed, independent wholesale distributors who purchase the products directly from the Company. They resell to federally licensed, independent retail firearms dealers who in turn resell to legally authorized end users. All retail purchasers are subject to a point-of-sale background check by law enforcement. These end users include sportsmen, hunters, people interested in self-defense, law enforcement and other governmental organizations, and gun collectors. Each distributor carries the entire line of firearms manufactured by the Company for the commercial market. Currently, 18 distributors service the domestic commercial market, with an additional 23 distributors servicing the domestic law enforcement market and 41 distributors servicing the export market.

 

In 2016, the Company’s largest customers and the percent of total sales they represented were as follows: Davidson’s-19%; Lipsey’s-17%; Jerry’s/Ellett Brothers-15%; and Sports South-14%.

 

In 2015, the Company’s largest customers and the percent of total sales they represented were as follows: Davidson’s-18%; Lipsey’s-17%; Sports South-13%, and Jerry’s/Ellett Brothers-11%.

 

In 2014, the Company’s largest customers and the percent of total sales they represented were as follows: Davidson’s-19%; Lipsey’s-13%; Sports South-13%, and Jerry’s/Ellett Brothers-12%.

 

The Company employs 17 employees who service these distributors and call on retailers and law enforcement agencies. Because the ultimate demand for the Company's firearms comes from end users rather than from the independent wholesale distributors, the Company believes that the

6 

Table of Contents 

loss of any distributor would not have a material, long-term adverse effect on the Company, but may have a material adverse effect on the Company’s financial results for a particular period. The Company considers its relationships with its distributors to be satisfactory.

 

The Company also exports its firearms through a network of selected commercial distributors and directly to certain foreign customers, consisting primarily of law enforcement agencies and foreign governments. Foreign sales were less than 5% of the Company's consolidated net sales for each of the past three fiscal years.

 

The Company does not consider its overall firearms business to be predictably seasonal; however, orders of many models of firearms from the distributors tend to be stronger in the first quarter of the year and weaker in the third quarter of the year. This is due in part to the timing of the distributor show season, which occurs during the first quarter.

 

Investment Castings and Metal Injected Moldings

The castings segment provides castings and MIM parts for the Company’s firearms segment. In addition, the castings segment produces some products for a number of customers in a variety of industries.

 

Competition

 

Firearms

Competition in the firearms industry is intense and comes from both foreign and domestic manufacturers. While some of these competitors concentrate on a single industry product category such as rifles or pistols, several competitors manufacture products in all four industry categories (rifles, shotguns, pistols, and revolvers). Some of these competitors are subsidiaries of larger corporations than the Company with substantially greater financial resources than the Company, which could affect the Company’s ability to compete. The principal methods of competition in the industry are product innovation, quality, availability, brand and price. The Company believes that it can compete effectively with all of its present competitors.

 

Investment Castings and Metal Injected Moldings

There are a large number of investment castings and MIM manufacturers, both domestic and foreign, with which the Company competes. Competition varies based on the type of investment castings products and the end use of the product. Companies offering alternative methods of manufacturing such as wire electric discharge machining (EDM) and advancements in computer numeric controlled (CNC) machining also compete with the Company’s castings segment. Many of these competitors are larger corporations than the Company with substantially greater financial resources than the Company, which could affect the Company’s ability to compete with these competitors. The principal methods of competition in the industry are quality, price, and production lead time.

 

7 

Table of Contents 

Employees

 

As of February 1, 2017, the Company employed approximately 2,110 full-time employees, approximately 24% of whom had at least ten years of service with the Company. The Company uses temporary employees to supplement its workforce. As of February 1, 2017, there were approximately 320 temporary employees in addition to the full-time employees.

 

None of the Company's employees are subject to a collective bargaining agreement.

 

Research and Development

 

In 2016, 2015, and 2014, the Company spent approximately $8.7 million, $8.5 million, and $10.0 million, respectively, on research and development activities relating to new products and the improvement of existing products. As of February 1, 2017, the Company had approximately 141 employees whose primary responsibilities were research and development activities.

 

Patents and Trademarks

 

The Company owns various United States and foreign patents and trademarks which have been secured over a period of years and which expire at various times. It is the policy of the Company to apply for patents and trademarks whenever new products or processes deemed commercially valuable are developed or marketed by the Company. However, none of these patents and trademarks are considered to be fundamental to any important product or manufacturing process of the Company and, although the Company deems its patents and trademarks to be of value, it does not consider its business materially dependent on patent or trademark protection.

 

Environmental Matters

 

The Company is committed to achieving high standards of environmental quality and product safety, and strives to provide a safe and healthy workplace for its employees and others in the communities in which it operates. The Company has programs in place that monitor compliance with various environmental regulations. However, in the normal course of its manufacturing operations the Company is subject to governmental proceedings and orders pertaining to waste disposal, air emissions, and water discharges into the environment. These regulations are integrated into the Company’s manufacturing, assembly, and testing processes. The Company believes that it is generally in compliance with applicable environmental regulations and that the outcome of any environmental proceedings and orders will not have a material adverse effect on the financial position of the Company, but could have a material adverse effect on the financial results for a particular period.

8 

Table of Contents 

 

Executive Officers of the Company

 

Set forth below are the names, ages, and positions of the executive officers of the Company. Officers serve at the discretion of the Board of Directors of the Company.

 

          Name Age Position With Company
     

Michael O. Fifer

59

Chief Executive Officer

     
Christopher J. Killoy 58 President and Chief Operating Officer
     
Thomas A. Dineen 48 Vice President, Treasurer and Chief Financial Officer
     
Mark T. Lang 60 Group Vice President
     
Thomas P. Sullivan 56 Vice President of Newport Operations
     
Kevin B. Reid, Sr. 56 Vice President, General Counsel and Corporate Secretary
     
Shawn C. Leska 45 Vice President, Sales
     

 

Michael O. Fifer joined the Company as Chief Executive Officer on September 25, 2006, and was named to the Board of Directors on October 19, 2006. Mr. Fifer also served as President from April 23, 2008 to December 31, 2013. Mr. Fifer will retire effective May 9, 2017 and will continue to support the Company as Vice Chairman of the Board of Directors after his retirement.

 

Christopher J. Killoy became President and Chief Operating Officer on January 1, 2014. Previously he served as Vice President of Sales and Marketing since November 27, 2006. Mr. Killoy originally joined the Company in 2003 as Executive Director of Sales and Marketing, and subsequently served as Vice President of Sales and Marketing from, November 1, 2004 to January 25, 2005. Mr. Killoy will succeed Michael O. Fifer as Chief Executive Officer upon Mr. Fifer's planned retirement effective May 9, 2017.

 

Thomas A. Dineen became Vice President on May 24, 2006. Previously he served as Treasurer and Chief Financial Officer since May 6, 2003 and had been Assistant Controller since 2001. Prior to that, Mr. Dineen had served as Manager, Corporate Accounting since 1997.

 

Mark T. Lang joined the Company as Group Vice President on February 18, 2008. Mr. Lang is responsible for management of the Prescott Firearms Division and Ruger Precision Metals, the Company’s MIM subsidiary. Prior to joining the Company, Mr. Lang was President of the Custom Products Business at Mueller Industries, Inc. Prior to joining Mueller, Mr. Lang was the Vice President of Operations for the Automotive Division of Thomas and Betts, Inc.

 

Thomas P. Sullivan joined the Company as Vice President of Newport Operations for the Newport, New Hampshire Firearms and Pine Tree Castings divisions on August 14, 2006. Mr. Sullivan is also responsible for the Mayodan, North Carolina Firearms division.

 

9 

Table of Contents 

Kevin B. Reid, Sr. became Vice President and General Counsel on April 23, 2008. Previously he served as the Company’s Director of Marketing from June 4, 2007. Mr. Reid joined the Company in July 2001 as an Assistant General Counsel.

 

Shawn C. Leska became Vice President, Sales on November 6, 2015. Mr. Leska joined the Company in 1989, and has served in a variety of positions in the sales department. Most recently, Mr. Leska served as Director of Sales since 2011.

 

 

Where You Can Find More Information

 

The Company is subject to the informational requirements of the Securities Exchange Act of 1934, as amended (the "Exchange Act"), and accordingly, files its Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Definitive Proxy Statements, Current Reports on Form 8-K, and other information with the Securities and Exchange Commission (the "SEC"). The public may read and copy any materials filed with the SEC at the SEC's Public Reference Room at 100 F Street NE, Washington, DC 20549. Please call the SEC at (800) SEC-0330 for further information on the Public Reference Room. As an electronic filer, the Company's public filings are maintained on the SEC's Internet site that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC. The address of that website is http://www.sec.gov.

 

The Company makes its Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Definitive Proxy Statements, Current Reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act accessible free of charge through the Company's Internet site after the Company has electronically filed such material with, or furnished it to, the SEC. The address of that website is http://www.ruger.com. However, such reports may not be accessible through the Company's website as promptly as they are accessible on the SEC’s website.

 

Additionally, the Company’s corporate governance materials, including its Corporate Governance Guidelines, the charters of the Audit, Compensation, Nominating and Corporate Governance, and Risk Oversight committees, and the Code of Business Conduct and Ethics may also be found under the “Stockholder Relations” subsection of the “Corporate” section of the Company’s Internet site at http://www.ruger.com/corporate. A copy of the foregoing corporate governance materials is available upon written request to the Corporate Secretary at Sturm, Ruger & Company, Inc., Lacey Place, Southport, Connecticut 06890.

 

 

ITEM 1A—RISK FACTORS

 

The Company’s operations could be affected by various risks, many of which are beyond its control. Based on current information, the Company believes that the following identifies the most significant risk factors that could adversely affect its business. Past financial performance may not be a reliable indicator of future performance and historical trends should not be used to anticipate results or trends in future periods.

 

10 

Table of Contents 

In evaluating the Company’s business, the following risk factors, as well as other information in this report, should be carefully considered.

 

Changes in government policies and firearms legislation could adversely affect the Company’s financial results.

The sale, purchase, ownership, and use of firearms are subject to thousands of federal, state and local governmental regulations. The basic federal laws are the National Firearms Act, the Federal Firearms Act, and the Gun Control Act of 1968. These laws generally prohibit the private ownership of fully automatic weapons and place certain restrictions on the interstate sale of firearms unless certain licenses are obtained. The Company does not manufacture fully automatic weapons and holds all necessary licenses under these federal laws. Several states currently have laws in effect similar to the aforementioned legislation.

 

In 2005, Congress enacted the Protection of Lawful Commerce in Arms Act (“PLCAA”). The PLCAA was enacted to address abuses by cities and agenda-driven individuals who wrongly sought to make firearms manufacturers liable for legally manufactured and lawfully sold products if those products were later used in criminal acts. The Company believes the PLCAA merely codifies common sense and long standing tort principles. If the PLCAA is repealed or efforts to circumvent it are successful and lawsuits similar to those filed by cities and agenda-driven individuals in the late 1990s and early 2000s are allowed to proceed, it could have a material adverse impact on the Company.

 

Currently, federal and several states’ legislatures are considering additional legislation relating to the regulation of firearms. These proposed bills are extremely varied, but many seek either to restrict or ban the sale and, in some cases, the ownership of various types of firearms. Other legislation seeks to require new technologies, such as microstamping and so-called “smart gun” technology, that are not proven, reliable or feasible. Such legislation became effective in California in 2013, and has limited our ability to sell certain products in California. If similar legislation is enacted in other states, it could effectively ban or severely limit the sale of affected firearms. There also are legislative proposals to limit magazine capacity.

 

The Company believes that the lawful private ownership of firearms is guaranteed by the Second Amendment to the United States Constitution and that the widespread private ownership of firearms in the United States will continue. However, there can be no assurance that the regulation of firearms will not become more restrictive in the future and that any such restriction would not have a material adverse effect on the business of the Company.

 

The Company’s results of operations could be further adversely affected if legislation with diverse requirements is enacted.

With literally thousands of laws being proposed at the federal, state and local levels, if even a small percentage of these laws are enacted and they are incongruent, the Company could find it difficult, expensive or even practically impossible to comply with them, impeding new product development and distribution of existing products.

 

11 

Table of Contents 

The Company’s results of operations could be adversely affected by litigation.

The Company faces risks arising from various asserted and unasserted litigation matters. These matters include, but are not limited to, assertions of allegedly defective product design or manufacture, alleged failure to warn, purported class actions against firearms manufacturers, generally seeking relief such as medical expense reimbursement, property damages, and punitive damages arising from accidents involving firearms or the criminal misuse of firearms, and those lawsuits filed on behalf of municipalities alleging harm to the general public. Various factors or developments can lead to changes in current estimates of liabilities such as final adverse judgment, significant settlement or changes in applicable law. A future adverse outcome in any one or more of these matters could have a material adverse effect on the Company’s financial results. See Note 17 to the financial statements which are included in this Annual Report on Form 10-K.

 

Our insurance may be insufficient to protect us from claims or losses.

We maintain insurance coverage with third-party insurers. However, not every risk or liability is or can be protected by insurance, and, for those risks we insure, the limits of coverage we purchase or that are reasonably obtainable in the market may not be sufficient to cover all actual losses or liabilities incurred. Moreover, there is a risk that commercially available liability insurance will not continue to be available to us at a reasonable cost, if at all. If liability claims or losses exceed our current or available insurance coverage, our business and prospects may be harmed.

 

The Company’s results of operations could be adversely affected by a decrease in demand for Company products.

If demand for the Company’s products decreases significantly, the Company would be unable to efficiently utilize its capacity, and profitability would suffer. Decreased demand could result from a macroeconomic downturn, or could be specific to the firearms industry. If the decrease in demand occurs abruptly, the adverse impact would be even greater.

 

The financial health of our independent distributors is critical to our success.

Over 90% of our sales are made to 18 federally licensed, independent wholesale distributors. We review our distributors’ financial statements and have credit insurance for many of them. However, our credit evaluations of distributors and credit insurance may not be completely effective, especially if an interest rate increase exacts an additional financial strain.

 

If one or more independent distributors experience financial distress or liquidity issues, we may not be able to collect our accounts receivable on a timely basis, which would have an adverse impact on our operating results and financial condition.

 

The Company must comply with various laws and regulations pertaining to workplace safety and environment, environmental matters, and firearms manufacture.

In the normal course of its manufacturing operations, the Company is subject to numerous federal, state and local laws and governmental regulations, and governmental proceedings and orders. These laws and regulations pertain to matters like workplace safety and environment, firearms serial number tracking and control, waste disposal, air emissions and water discharges

12 

Table of Contents 

into the environment. Noncompliance with any one or more of these laws and regulations could have a material adverse impact on the Company.

 

Misconduct of our employees or contractors could cause us to lose customers and could have a significant adverse impact on our business and reputation.

Misconduct, fraud or other improper activities by our employees, or contractors could have a material adverse impact on our business and reputation. Such misconduct could include the failure to comply with federal, state, local or foreign government procurement regulations, regulations regarding the protection of personal information, laws and regulations relating to antitrust and any other applicable laws or regulations.

 

Business disruptions at one of the Company’s manufacturing facilities could adversely affect the Company’s financial results.

The Newport, New Hampshire, Prescott, Arizona and Mayodan, North Carolina facilities are critical to the Company’s success. These facilities house the Company’s principal production, research, development, engineering, design, and shipping operations. Any event that causes a disruption of the operation of any of these facilities for even a relatively short period of time could have a material adverse effect on the Company’s ability to produce and ship products and to provide service to its customers.

 

We rely on our information and communications systems in our operations. Security breaches and other disruptions could adversely affect our business and results of operations.

Cyber-security threats are significant and evolving and include, among others, malicious software, attempts to gain unauthorized access to data, and other electronic security breaches that could lead to disruptions in mission critical systems, unauthorized release of confidential or otherwise protected information and corruption of data. In addition to security threats, we are also subject to other systems failures, including network, software or hardware failures, whether caused by us, third-party service providers, natural disasters, power shortages, terrorist attacks or other events. The unavailability of our information or communications systems, the failure of these systems to perform as anticipated or any significant breach of data security could cause loss of data, disrupt our operations, lead to financial losses from remedial actions, require significant management attention and resources, and negatively impact our reputation among our customers and the public, which could have a negative impact on our financial condition, results of operations and liquidity.

 

Price increases for raw materials could adversely affect the Company’s financial results.

Third parties supply the Company with various raw materials for its firearms and castings, such as fabricated steel components, walnut, birch, beech, maple and laminated lumber for rifle stocks, wax, ceramic material, metal alloys, various synthetic products and other component parts. There is a limited supply of these materials in the marketplace at any given time, which can cause the purchase prices to vary based upon numerous market factors. The Company believes that it has adequate quantities of raw materials in inventory or on order to provide ample time to locate and obtain additional items at then-current market cost without interruption of its manufacturing operations. However, if market conditions result in a significant prolonged inflation of certain prices or if adequate quantities of raw materials cannot be obtained, the

13 

Table of Contents 

Company’s manufacturing processes could be interrupted and the Company’s financial condition or results of operations could be materially adversely affected.

 

Retention of key management is critical to the success of the Company.

We rely on the management and leadership skills of our senior management team. Our senior executives are not bound by employment agreements. The loss of the services of one or more of our senior executives or other key personnel could have a significant adverse impact on our business.

 

 

ITEM 1B—UNRESOLVED STAFF COMMENTS

 

None.

 

14 

Table of Contents 

 

ITEM 2—PROPERTIES

 

The Company’s manufacturing operations are carried out at four facilities. The following table sets forth certain information regarding each of these facilities:

 

   Approximate
Aggregate
Usable
Square Feet
Status  Segment
          
Newport, New Hampshire   350,000    Owned    Firearms/Castings 
                
Prescott, Arizona   230,000    Leased    Firearms 
                
Mayodan, North Carolina   220,000    Owned    Firearms 
                
Earth City, Missouri   35,000    Leased    Castings 

 

Each firearms facility contains enclosed ranges for testing firearms. The lease of the Prescott facility provides for rental payment, which are approximately equivalent to estimated rates for real property taxes.

 

The Company has other facilities that were not used in its manufacturing operations in 2016:

 

   Approximate
Aggregate
Usable
Square Feet
Status  Segment
          
          
Southport, Connecticut   25,000    Owned    Corporate 
                
Newport, New Hampshire (Dorr Woolen Building)   45,000    Owned    Firearms 
                
Enfield, Connecticut   10,000    Leased    Firearms 
                
Rochester, New Hampshire   2,000    Leased    Firearms 

 

There are no mortgages or any other major encumbrance on any of the real estate owned by the Company.

 

The Company’s principal executive offices are located in Southport, Connecticut.

15 

Table of Contents 

 

ITEM 3—LEGAL PROCEEDINGS

 

The nature of the legal proceedings against the Company is discussed at Note 17 to the financial statements, which are included in this Form 10-K.

 

The Company has reported all cases instituted against it through October 1, 2016, and the results of those cases, where terminated, to the SEC on its previous Form 10-Q and 10-K reports, to which reference is hereby made.

 

During the three months ending December 31, 2016, one case was formally instituted against the Company, captioned Terry W. Turner v. Sturm, Ruger & Company, Inc. and Winchester Ammunition, Inc., pending in the United States District Court for the Northern District of Alabama, Eastern Division.

 

During the three months ending December 31, 2016, no cases previously reported were settled or dismissed.

 

 

ITEM 4—MINE SAFETY DISCLOSURES – NOT APPLICABLE

 

16 

Table of Contents 

 

PART II

 

 

ITEM 5— MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

 

The Company’s common stock is traded on the New York Stock Exchange under the symbol “RGR.” At February 9, 2017, the Company had 1,690 stockholders of record.

 

The following table sets forth, for the periods indicated, the high and low sales prices for the Company’s common stock as reported on the New York Stock Exchange and dividends paid on the Company’s common stock.

 

   High   Low   Dividends
Per Share
 
2015:               
     First Quarter  $56.13   $33.89   $0.17 
     Second Quarter   58.77    47.38    0.32 
     Third Quarter   66.11    54.84    0.36 
     Fourth Quarter   61.39    48.10    0.25 
                
2016:               
     First Quarter  $78.09   $49.62   $0.35 
     Second Quarter   69.73    57.25    0.48 
     Third Quarter   70.30    54.41    0.49 
     Fourth Quarter   65.95    47.15    0.41 
                

 

17 

Table of Contents 

 

Issuer Repurchase of Equity Securities

 

In 2016, 2015, and 2014 the Company repurchased shares of its common stock. Details of these purchases are as follows:

  

Period  Total
Number of
Shares
Purchased
   Average
Price Paid
per Share
   Total
Number of
Shares
Purchased
as Part of
Publicly
Announced
Program
   Maximum
Dollar
Value of
Shares that
May Yet Be
Purchased
Under the
Program
 
                 
November 13, 2014 to December
31, 2014
   680,813   $35.22    680,813      
January 1, 2015 to January 4, 2015   82,100   $34.57    82,100      
November 2016   179,685   $49.11    179,685      
December 2016   103,658   $50.00    103,658      
Total   1,046,256   $39.06    1,046,256   $58,982,000 

 

All of these purchases were made with cash held by the Company and no debt was incurred.

 

At December 31, 2016, approximately $59 million remained authorized for share repurchases.

18 

Table of Contents 

 

Comparison of Five-Year Cumulative Total Return*

Sturm, Ruger & Co., Inc., Standard & Poor’s 500, Recreation and Russell 2000 Index

(Performance Results Through 12/31/16)

Assumes $100 invested at the close of trading 12/11 in Sturm, Ruger & Company, Inc. common stock, Standard and Poor’s 500, Recreation and Russell 2000 Index.

 

* Cumulative total return assumes reinvestment of dividends.

 

Source: Value Line Publishing LLC

 

  2011 2012 2013 2014 2015 2016
Sturm, Ruger & Co., Inc. $100.00 $222.54 $310.46 $518.31 $252.72 $443.72
Standard & Poor’s 500 $100.00 $100.00 $113.40 $146.97 $163.71 $162.52
Recreation $100.00 $92.16 $123.70 $170.27 $194.06 $220.20
Russell 2000 Index $100.00 $94.55 $108.38 $148.49 $153.73 $144.95

19 

Table of Contents 

Securities Authorized for Issuance Under Equity Compensation Plans

 

The following table provides information regarding compensation plans under which equity securities of the Company are authorized for issuance as of December 31, 2016:

 

Equity Compensation Plan Information
Plan category Number of securities to
be issued upon exercise of
outstanding options,
warrants and rights


(a)
Weighted-average
exercise price of
outstanding options,
warrants and rights


(b) *
Number of securities
remaining available for
future issuance under
equity compensation
plans (excluding
securities reflected in
column (a))


(c)

Equity compensation
plans approved by
security holders

 

     
      -
2007 Stock Incentive Plan 204,057 $8.95 per share 472,000

 

Equity compensation
plans not approved by
security holders

 

     
None.      
Total 204,057 $8.95 per share 472,000

 

* Restricted stock units are settled in shares of common stock on a one-for-one basis. Accordingly, such units have been excluded for purposes of computing the weighted-average exercise price.

20 

Table of Contents 

 

ITEM 6—SELECTED FINANCIAL DATA

 

(Dollars in thousands, except per share data)

December 31,                    
   2016   2015   2014   2013   2012 
                     
Net firearms sales  $658,433   $544,850   $542,267   $678,552   $484,933 
Net castings sales   5,895    6,244    2,207    9,724    6,891 
Total net sales   664,328    551,094    544,474    688,276    491,824 
Cost of products sold   444,774    378,934    375,300    429,671    312,871 
Gross profit   219,554    172,160    169,174    258,605    178,953 
Income before income taxes   135,921    96,100    57,240    175,232    112,109 
Income taxes   48,449    33,974    18,612    63,960    41,480 
Net income   87,472    62,126    38,628    111,272    70,629 
Basic earnings per share   4.62    3.32    1.99    5.76    3.69 
Diluted earnings per share   4.59    3.21    1.95    5.58    3.60 
Cash dividends per share  $1.73   $1.10   $1.62   $2.12   $5.80 

 

 

December 31,                    
   2016   2015   2014   2013   2012 
Working capital  $142,729   $107,279   $57,792   $69,460   $37,430 
Total assets   355,404    315,883    254,382    277,118    174,486 
Total stockholders’ equity   265,900    227,738    185,462    179,086    95,032 
Book value per share  $14.23   $12.17   $9.90   $9.26   $4.93 
Return on stockholders’ equity   35.4%    30.1%    21.2%    81.2%    60.8% 
Current ratio   2.8 to 1    2.3 to 1    2.0 to 1    1.8 to 1    1.6 to 1 
Common shares outstanding   18,688,500    18,713,400    18,737,000    19,348,000    19,263,000 
Number of stockholders of record   1,678    1,702    1,726    1,718    1,771 
Number of employees   2,120    1,920    1,847    1,862    1,441 
Number of temporary employees   310    205    220    530    570 

 

21 

Table of Contents 
ITEM7— MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

 

Company Overview

 

Sturm, Ruger & Company, Inc. (the “Company”) is principally engaged in the design, manufacture, and sale of firearms to domestic customers. Approximately 99% of sales are from firearms. Export sales represent approximately 3% of total sales. The Company’s design and manufacturing operations are located in the United States and almost all product content is domestic. The Company’s firearms are sold through a select number of independent wholesale distributors, principally to the commercial sporting market.

 

The Company also manufactures investment castings made from steel alloys and metal injection molding (“MIM”) parts for internal use in its firearms and for sale to unaffiliated, third-party customers. Approximately 1% of sales are from the castings segment.

 

Orders of many models of firearms from the independent distributors tend to be stronger in the first quarter of the year and weaker in the third quarter of the year. This is due in part to the timing of the distributor show season, which occurs during the first quarter.

 

Results of Operations - 2016

 

Product Demand

 

 

The estimated sell-through of the Company’s products from the independent distributors to retailers increased 12% in 2016 from 2015. For the same period, the National Instant Criminal Background Check System (“NICS”) background checks (as adjusted by the National Shooting Sports Foundation (“NSSF”)) increased 10%. The increase in estimated sell-through of the Company’s products from the independent distributors to retailers is attributable to:

 

·stronger-than-normal seasonal industry demand, likely bolstered by the political campaigns for the elections in November,
·strong demand for certain new products,
·increased production of several products in strong demand, and
·greater availability of rimfire ammunition which spurred demand for our 10/22 rifle and other rimfire firearms late in the latter half of the year.

 

New products represented $192.6 million or 29% of firearms sales in 2016, compared to $115.4 million or 21% of firearms sales in 2015. New product sales include only major new products that were introduced in the past two years. In 2016, new products included the Precision Rifle, the AR-556 modern sporting rifle, the LC9s pistol, the Mark IV pistols, the LCP II pistol, and the American pistol. The AR-556 and the LC9s pistol will not be considered new products in 2017.

22 

Table of Contents 

 

Estimated sell-through from distributors to retailers and total adjusted NICS background checks:

 

   2016   2015   2014 
             
Estimated Units Sold from Distributors to
Retailers (1)
   2,007,200    1,793,800    1,669,700 
                
Total Adjusted NICS Background Checks (2)   15,727,700    14,244,200    13,090,400 

 

(1)The estimates for each period were calculated by taking the beginning inventory at the distributors, plus shipments from the Company to distributors during the period, less the ending inventory at distributors. These estimates are only a proxy for actual market demand as they:

 

·Rely on data provided by independent distributors that are not verified by the Company,
·Do not consider potential timing issues within the distribution channel, including goods-in-transit, and
·Do not consider fluctuations in inventory at retail.

 

(2)NICS background checks are performed when the ownership of most firearms, either new or used, is transferred by a Federal Firearms Licensee. NICS background checks are also performed for permit applications, permit renewals, and other administrative reasons.  

 

The adjusted NICS data presented above was derived by the NSSF by subtracting NICS checks that are not directly related to the sale of a firearm, including checks used for concealed carry (“CCW”) permit application checks as well as checks on active CCW permit databases.

 

Orders Received and Ending Backlog

 

The Company uses the estimated unit sell-through of our products from the independent distributors to retailers, along with inventory levels at the independent distributors and at the Company, as the key metrics for planning production levels.

 

Net Orders Received in 2016 increased 49% from 2015. Our ending order backlog of 621,400 units at December 31, 2016 increased 191,100 units from backlog of 430,300 units at December 31, 2015.

23 

Table of Contents 

The units ordered, value of orders received and ending backlog, net of Federal Excise Tax, for the trailing three years are as follows (dollars in millions, except average sales price):

 

   2016   2015   2014 
             
Orders Received  $688.5   $463.2   $286.8 
                
Average Sales Price of Orders Received  $306   $303   $311 
                
Ending Backlog  $195.0   $137.8   $204.2 
                
Average Sales Price of Ending Backlog  $314   $320   $313 

 

Production

 

The Company reviews the estimated sell-through from the independent distributors to retailers, as well as inventory levels at the independent distributors and at the Company, semi-monthly to plan production levels and manage increases in inventory. These reviews and increased production capacity of products in strong demand resulted in an increase in total unit production of 23.5% in 2016 compared to 2015.

 

Annual Summary Unit Data

 

Firearms unit data for orders, production, and shipments follows:

 

   2016   2015   2014 
             
Units Ordered   2,246,600    1,517,000    921,900 
                
Units Produced   2,125,500    1,721,300    1,867,800 
                
Units Shipped   2,055,500    1,738,100    1,791,300 
                
Average Sales Price  $320   $313   $303 
                
Units - Backlog   621,400    430,300    651,400 

 

Inventories

 

The Company’s finished goods inventory increased by 70,000 units during 2016.

 

Distributor inventories of the Company’s products increased by 48,300 units during 2016 and approximate a reasonable level to support rapid fulfillment of retailer demand.

 

24 

Table of Contents 

 

Inventory data follows:

 

   December 31, 
   2016   2015   2014 
 Units – Company Inventory   157,400    87,400    104,200 
                
Units – Distributor Inventory (3)   319,300    271,000    326,700 
                
Total inventory (4)   476,700    358,400    430,900 
                

 

(3)Distributor ending inventory as provided by the independent distributors of the Company’s products. These numbers do not include goods-in-transit inventory that has been shipped from the Company but not yet received by the distributors.
(4)This total does not include inventory at retailers. The Company does not have access to data on retailer inventories.

 

Year ended December 31, 2016, as compared to year ended December 31, 2015:

 

Net Sales

 

Consolidated net sales were $664.3 million in 2016. This represents an increase of $113.2 million or 20.5% from 2015 consolidated net sales of $551.1 million.

 

Firearms segment net sales were $658.4 million in 2016. This represents an increase of $113.5 million or 20.8% from 2015 firearms net sales of $544.9 million. Firearms unit shipments increased 18.3% in 2016.

 

Casting segment net sales were $5.9 million in 2016. This represents a decrease of $0.3 million or 5.6% from 2015 casting sales of $6.2 million.

 

Cost of Products Sold and Gross Profit

 

Consolidated cost of products sold was $444.8 million in 2016. This represents an increase of $65.9 million or 17.4% from 2015 consolidated cost of products sold of $378.9 million.

25 

Table of Contents 

 

 

The gross margin was 33.2% in 2016. This represents an increase from 31.2% in 2015 as illustrated below:

 

(in thousands)

Year Ended December 31,  2016   2015 
                 
Net sales  $664,328    100.0%   $551,094    100.0% 
                     
Cost of products sold, before LIFO,
overhead and labor rate adjustments to
inventory, and product liability
   441,773    66.5%    375,267    68.1% 
                     
LIFO expense   481    0.1%    1,458    0.3% 
                     
Overhead rate adjustments to inventory   482    0.1%    1,150    0.2% 
                     
Labor rate adjustments to inventory   (17)       139     
                     
Product liability   2,055    0.3%    920    0.2% 
                     
Total cost of products sold   444,774    67.0%    378,934    68.8% 
                     
Gross profit  $219,554    33.0%   $172,160    31.2% 

 

Cost of products sold, before LIFO, overhead and labor rate adjustments to inventory, and product liability- In 2016, cost of products sold, before LIFO, overhead and labor rate adjustments to inventory, and product liability decreased 1.8% as a percentage of sales compared to 2015. This increased profitability is attributable to increased volume and improved productivity.

 

LIFO- Gross inventories increased by $18.1 million in 2016 and decreased $7.7 million in 2015. In 2016 and 2015, the Company recognized LIFO expense of $0.5 million and $1.5 million, respectively, which increased cost of products sold.

 

Overhead Rate Change- The net impact on inventory in 2016 and 2015 from the change in the overhead rates used to absorb overhead expenses into inventory was a decrease of $0.5 million and $1.2 million, respectively, reflecting increased overhead efficiency. This decrease in inventory value resulted in a corresponding increase to cost of products sold in 2016 and 2015.

 

Labor Rate Adjustments- In 2016, the change in inventory value resulting from the change in the labor rates used to absorb labor expenses into inventory was de minimis. In 2015, the change in inventory value resulting from the change in the labor rates used to absorb labor expenses into inventory was a decrease of $0.1 million, reflecting increased labor efficiency. This decrease in inventory value resulted in a corresponding increase to cost of products sold.

26 

Table of Contents 

Product Liability- This expense includes the cost of outside legal fees, insurance, and other expenses incurred in the management and defense of product liability matters. These costs totaled $2.1 million and $0.9 million in 2016 and 2015, respectively. See Note 17 in the notes to the financial statements “Contingent Liabilities” for further discussion of the Company’s product liability.

 

Gross Profit- Gross profit was $219.6 million or 33.0% of sales in 2016. This is an increase of $47.4 million from 2015 gross profit of $172.2 million or 31.2% of sales in 2015.

 

Selling, General and Administrative

 

Selling, general and administrative expenses were $85.1 million in 2016, an increase of $7.4 million from $77.7 million in 2015, and a decrease from 14.1% of sales in 2015 to 12.8% of sales in 2016. The increase in selling, general and administrative expenses is primarily attributable to increased promotional selling expenses, including the “Ruger $5 Million Match Challenge” and the “2.5 Million Gun Challenge” in 2016.

 

Other Operating Income, net

 

Other operating income, net consists of the following (in thousands):

 

   2016   2015 
         
Gain on sale of operating assets  $5   $113 
           
Total other operating income, net  $5   $113 

 

Operating Income

 

Operating income was $134.4 million or 20.2% of sales in 2016. This is an increase of $39.9 million from 2015 operating income of $94.5 million or 17.2% of sales.

Royalty Income

 

Royalty income was $1.1 million in 2016 and 2015.

 

Interest Income and Interest Expense

 

Interest income and interest expense were negligible in 2016 and 2015.

 

Other Income (Expense), Net

 

Other income (expense), net was income of $0.5 million in 2016, a decrease of $0.1 million from income of $0.6 million in 2015.

27 

Table of Contents 

Income Taxes and Net Income

 

The effective income tax rate was 35.6% in 2016 and 35.4% in 2015. The increase in the effective tax rate is primarily attributable to a decrease in the domestic production activities deduction in 2016 compared to 2015.

 

As a result of the foregoing factors, consolidated net income was $87.5 million in 2016. This represents an increase of $25.4 million from 2015 consolidated net income of $62.1 million.

 

Non-GAAP Financial Measure

 

In an effort to provide investors with additional information regarding its results, the Company refers to various United States generally accepted accounting principles (“GAAP”) financial measures and one non-GAAP financial measure, EBITDA, which management believes provides useful information to investors. This non-GAAP measure may not be comparable to similarly titled measures being disclosed by other companies. In addition, the Company believes that the non-GAAP financial measure should be considered in addition to, and not in lieu of, GAAP financial measures. The Company believes that EBITDA is useful to understanding its operating results and the ongoing performance of its underlying business, as EBITDA provides information on the Company’s ability to meet its capital expenditure and working capital requirements, and is also an indicator of profitability. The Company believes that this reporting provides better transparency and comparability to its operating results. The Company uses both GAAP and non-GAAP financial measures to evaluate the Company’s financial performance.

 

Non-GAAP Reconciliation – EBITDA

EBITDA

(Unaudited, dollars in thousands)

 

Year ended December 31,  2016   2015 
         
Net income  $87,472   $62,126 
           
Income tax expense   48,449    33,974 
Depreciation and amortization expense   35,355    36,235 
Interest expense   186    156 
Interest income   (14)   (5)
EBITDA  $171,448   $132,486 

 

EBITDA is defined as earnings before interest, taxes, and depreciation and amortization. The Company calculates this by adding the amount of interest expense, income tax expense and depreciation and amortization expenses that have been deducted from net income back into net income, and subtracting the amount of interest income that was included in net income from net income to arrive at EBITDA. The Company’s EBITDA calculation also excludes any one-time non-cash, non-operating expense.

28 

Table of Contents 

 

Quarterly Data

 

To supplement the summary annual unit data and discussion above, the same data for the last eight quarters follows:

   2016 
   Q4   Q3   Q2   Q1 
                 
Units Ordered   432,100    445,700    399,400    969,400 
                     
Units Produced   566,200    527,600    529,600    502,100 
                     
Units Shipped   527,300    507,500    504,000    516,700 
                     
Estimated Units Sold from
Distributors to Retailers
   529,100    453,400    453,700    571,000 
                     
Total Adjusted NICS Background
Checks
   4,861,000    3,519,000    3,199,000    4,148,000 
                     
Average Unit Sales Price  $304   $315   $330   $332 
                     
Units – Backlog   621,400    716,600    778,400    883,000 
                     
Units – Company Inventory   157,400    118,500    98,500    72,800 
                     
Units – Distributor Inventory (5)   319,300    321,100    267,000    216,700 

 

 

   2015 
   Q4   Q3   Q2   Q1 
                 
Units Ordered   696,400    207,500    262,400    350,700 
                     
Units Produced   425,400    439,900    487,000    369,000 
                     
Units Shipped   478,400    394,700    442,900    422,100 
                     
Estimated Units Sold from
Distributors to Retailers
   552,700    374,900    379,400    486,800 
                     
Total Adjusted NICS Background
Checks
   4,880,000    3,050,000    2,793,000    3,521,000 
                     
Average Unit Sales Price  $315   $302   $314   $321 
                     
Units – Backlog   430,300    212,300    399,500    580,000 
                     
Units – Company Inventory   87,400    140,400    95,200    51,100 
                     
Units – Distributor Inventory (5)   271,000    345,300    325,500    262,000 

 

(5)Distributor ending inventory as provided by the independent distributors of the Company’s products.

 

29 

Table of Contents 

(in millions except average sales price, net of Federal Excise Tax)

 

   2016 
   Q4   Q3   Q2   Q1 
                 
Orders Received  $130.2   $116.5   $145.7   $296.1 
                     
Average Sales Price of Orders Received  $301   $261   $365   $305 
                     
Ending Backlog  $195.0   $219.1   $257.6   $276.1 
                     
Average Sales Price of Ending Backlog  $314   $306   $331   $313 

 

 

   2015 
   Q4   Q3   Q2   Q1 
                 
Orders Received  $203.4   $73.1   $71.9   $114.8 
                     
Average Sales Price of Orders Received  $292   $352   $274   $327 
                     
Ending Backlog  $137.8   $80.5   $123.8   $185.1 
                     
Average Sales Price of Ending Backlog  $320   $379   $310   $319 

 

30 

Table of Contents 

 

Fourth Quarter Gross Profit Analysis

 

The gross margin for the fourth quarter of 2016 and 2015 was 33.1% and 31.7%, respectively. Details of the gross margin are illustrated below:

 

(in thousands)

Three Months Ended December 31,  2016   2015 
                 
Net sales  $161,849    100.0%  $152,397    100.0%
                     
Cost of products sold, before LIFO,
overhead and labor rate adjustments to
inventory, and product liability
   109,977    67.9%   106,161    69.6%
                     
LIFO (income) expense   (1,295)   (0.8)%   (247)   (0.2)%
                     
Overhead rate adjustments to inventory   (756)   (0.5)%   (1,802)   (1.2)%
                     
Labor rate adjustments to inventory   (133)   (0.1)%   (207)   (0.1)%
                     
Product liability   560    0.4%   248    0.2%
                     
Total cost of products sold   108,353    66.9%   104,153    68.3%
                     
Gross profit  $53,496    33.1%  $48,244    31.7%

 

 

Note: For a discussion of the captions in the above table, please see the “Cost of Products Sold and Gross Profit” discussion above.

 

31 

Table of Contents 

Results of Operations - 2015

 

Year ended December 31, 2015, as compared to year ended December 31, 2014:

 

Annual Summary Unit Data

 

Firearms unit data for orders, production, shipments and ending inventory, and castings setups (a measure of foundry production) are as follows:

 

   2015   2014   2013 
             
Units Ordered   1,517,000    921,900    2,251,000 
                
Units Produced   1,721,300    1,867,800    2,249,500 
                
Units Shipped   1,738,100    1,791,300    2,237,400 
                
Average Sales Price  $313   $303   $303 
                
Units – Backlog   430,300    651,400    1,520,800 
                
Units – Company Inventory   87,400    104,200    27,700 
                
Units – Distributor Inventory (1)   271,000    326,700    205,100 
                
Castings Setups   164,212    201,592    273,597 

 

 

Orders Received and Ending Backlog

 

(in millions except average sales price, net of Federal Excise Tax):

 

   2015   2014   2013 
             
Orders Received  $463.2   $286.8   $636.0 
                
Average Sales Price of Orders Received (2)  $303   $311   $283 
                
Ending Backlog (2)  $137.8   $204.2   $440.6 
                
Average Sales Price of Ending Backlog (2)  $320   $313   $290 

 

(1)Distributor ending inventory as provided by the independent distributors of the Company’s products.

 

(2)Average sales price for orders received and ending backlog is net of Federal Excise Tax of 10% for handguns and 11% for long guns.

32 

Table of Contents 

 

Product Demand

 

After a year of declining demand in 2014, demand rebounded in 2015 to slightly higher levels and followed typical historical seasonal patterns.

 

The estimated sell-through of the Company’s products from the independent distributors to retailers increased 7% in 2015 from 2014. For the same period, the National Instant Criminal Background Check System (“NICS”) background checks (as adjusted by the National Shooting Sports Foundation (“NSSF”)) increased 9%.

 

New products represented $115.4 million or 21% of firearms sales in 2015, compared to $89.4 million or 16% of firearms sales in 2014. New product sales include only major new products that were introduced in the past two years.

 

Estimated sell-through from distributors to retailers and total adjusted NICS background checks:

 

   2015   2014   2013 
             
Estimated Units Sold from Distributors to Retailers (1)   1,793,800    1,669,700    2,091,500 
                
Total Adjusted NICS Background Checks (2)   14,244,200    13,090,400    14,796,900 

 

(1)The estimates for each period were calculated by taking the beginning inventory at the distributors, plus shipments from the Company to distributors during the period, less the ending inventory at distributors. These estimates are only a proxy for actual market demand as they:

 

·Rely on data provided by independent distributors that are not verified by the Company,
·Do not consider potential timing issues within the distribution channel, including goods-in-transit, and
·Do not consider fluctuations in inventory at retail.

 

(2)NICS background checks are performed when the ownership of most firearms, either new or used, is transferred by a Federal Firearms Licensee. NICS background checks are also performed for permit applications, permit renewals, and other administrative reasons.  

 

The adjusted NICS data presented above was derived by the NSSF by subtracting NICS checks that are not directly related to the sale of a firearm, including checks used for concealed carry (“CCW”) permit application checks as well as checks on active CCW permit databases.

33 

Table of Contents 

 

Production

 

The Company reviews the estimated sell-through from the independent distributors to retailers, as well as inventory levels at the independent distributors and at the Company, semi-monthly to plan production levels and manage increases in inventory. These reviews resulted in decreased total unit production of 8% in 2015 compared to 2014.

 

Inventories

 

The Company’s finished goods inventory decreased by 16,800 units during 2015.

 

Distributor inventories of the Company’s products decreased by 55,700 units during 2015 and approximate a reasonable level to support rapid fulfillment of retailer demand. However, there is still insufficient inventory of certain models that are experiencing strong demand.

 

Inventory data follows:

 

   December 31, 
   2015   2014   2013 
 Units – Company Inventory   87,400    104,200    27,700 
                
Units – Distributor Inventory (3)   271,000    326,700    205,100 
                
Total inventory (4)   358,400    430,900    232,800 
                

 

(3)Distributor ending inventory as provided by the independent distributors of the Company’s products. These numbers do not include goods-in-transit inventory that has been shipped from the Company but not yet received by the distributors.
(4)This total does not include inventory at retailers. The Company does not have access to data on retailer inventories.

34 

Table of Contents 

 

Quarterly Summary Unit Data

 

To supplement the summary annual unit data and discussion above, the same data for the last eight quarters follows:

 

   2015 
   Q4   Q3   Q2   Q1 
                     
Units Ordered   696,400    207,500    262,400    350,700 
                     
Units Produced   425,400    439,900    487,000    369,000 
                     
Units Shipped   478,400    394,700    442,900    422,100 
                     
Estimated Units Sold from
Distributors to Retailers
   552,700    374,900    379,400    486,800 
                     
Total Adjusted NICS Background
Checks
   4,880,000    3,050,000    2,793,000    3,521,000 
                     
Average Unit Sales Price  $315   $302   $314   $321 
                     
Units – Backlog   430,300    212,300    399,500    580,000 
                     
Units – Company Inventory   87,400    140,400    95,200    51,100 
                     
Units – Distributor Inventory (5)   271,000    345,300    325,500    262,000 

 

 

   2014 
   Q4   Q3   Q2   Q1 
                 
Units Ordered   225,800    155,900    145,200    395,000 
                     
Units Produced   360,900    356,400    552,200    598,300 
                     
Units Shipped   399,100    317,100    513,700    561,400 
                     
Estimated Units Sold from
Distributors to Retailers
   422,500    292,900    388,900    565,400 
                     
Total Adjusted NICS Background
Checks
   4,129,000    2,830,000    2,672,000    3,459,000 
                     
Average Unit Sales Price  $306   $310   $298   $301 
                     
Units – Backlog   651,400    824,700    985,900    1,354,400 
                     
Units – Company Inventory   104,200    142,400    103,100    64,600 
                     
Units – Distributor Inventory (5)   326,700    350,100    325,900    201,100 

 

35 

Table of Contents 

(5)Distributor ending inventory as provided by the independent distributors of the Company’s products.

 

(in millions except average sales price, net of Federal Excise Tax)

 

   2015 
   Q4   Q3   Q2   Q1 
                 
Orders Received  $203.4   $73.1   $71.9   $114.8 
                     
Average Sales Price of Orders Received  $292   $352   $274   $327 
                     
Ending Backlog  $137.8   $80.5   $123.8   $185.1 
                     
Average Sales Price of Ending Backlog  $320   $379   $310   $319 

 

   2014 
   Q4   Q3   Q2   Q1 
                 
Orders Received  $74.7   $50.1   $42.2   $119.8 
                     
Average Sales Price of Orders Received  $331   $321   $291   $303 
                     
Ending Backlog  $204.2   $242.9   $289.1   $396.5 
                     
Average Sales Price of Ending Backlog  $313   $295   $293   $293 

 

 

Net Sales

 

Consolidated net sales were $551.1 million in 2015. This represents an increase of $6.6 million or 1.2% from 2014 consolidated net sales of $544.5 million.

 

Firearms segment net sales were $544.9 million in 2015. This represents an increase of $2.6 million or 0.5% from 2014 firearms net sales of $542.3 million. Firearms unit shipments decreased 3.0% in 2015.

 

Casting segment net sales were $6.2 million in 2015. This represents an increase of $4.0 million or 183% from 2014 casting sales of $2.2 million.

 

Cost of Products Sold and Gross Profit

 

Consolidated cost of products sold was $378.9 million in 2015. This represents an increase of $3.6 million or 1.0% from 2014 consolidated cost of products sold of $375.3 million.

36 

Table of Contents 

The gross margin was 31.2% in 2015. This represents a slight increase from 31.1% in 2014 as illustrated below:

 

(in thousands)

Year Ended December 31,  2015   2014 
                 
Net sales  $551,094    100.0%  $544,474    100.0%
                     
Cost of products sold, before LIFO, overhead and labor rate adjustments to inventory, and product liability   375,267    68.1%   378,207    69.5%
                     
LIFO expense   1,458    0.3%   2,062    0.4%
                     
Overhead rate adjustments to inventory   1,150    0.2%   (5,320)   (1.0)%
                     
Labor rate adjustments to inventory   139        (424)   (0.1)%
                     
Product liability   920    0.2%   775    0.1%
                     
Total cost of products sold   378,934    68.8%   375,300    68.9%
                     
Gross profit  $172,160    31.2%  $169,174    31.1%

 

Cost of products sold, before LIFO, overhead and labor rate adjustments to inventory, and product liability- In 2015, cost of products sold, before LIFO, overhead and labor rate adjustments to inventory, and product liability decreased 1.4% as a percentage of sales compared to 2014. This increased profitability is attributable to improved productivity, partially offset by a less favorable shift in product mix.

 

LIFO- Gross inventories decreased by $7.7 million in 2015 and increased $24.8 million in 2014. In 2015 and 2014, the Company recognized LIFO expense of $1.5 million and $2.1 million, respectively, which increased cost of products sold.

 

Overhead Rate Change- The net impact on inventory in 2015 from the change in the overhead rates used to absorb overhead expenses into inventory was a decrease of $1.2 million, reflecting increased overhead efficiency. This decrease in inventory value resulted in a corresponding increase to cost of products sold in 2015. In 2014, the change in inventory value resulting from the change in the overhead rate used to absorb overhead expenses into inventory was an increase of $5.3 million, reflecting decreased overhead efficiency. This increase in inventory value resulted in a corresponding decrease to cost of products sold.

 

37 

Table of Contents 

Labor Rate Adjustments- In 2015, the change in inventory value resulting from the change in the labor rates used to absorb labor expenses into inventory was a decrease of $0.1 million, reflecting increased labor efficiency. This decrease in inventory value resulted in a corresponding increase to cost of products sold. The net impact in 2014 from the change in the labor rates used to absorb labor expenses into inventory was an increase to inventory of $0.4 million, reflecting decreased labor efficiency. This increase in inventory value resulted in a corresponding decrease to cost of products sold.

 

Product Liability- This expense includes the cost of outside legal fees, insurance, and other expenses incurred in the management and defense of product liability matters. These costs totaled $0.9 million and $0.8 million in 2015 and 2014, respectively. See Note 17 in the notes to the financial statements “Contingent Liabilities” for further discussion of the Company’s product liability.

 

Gross Profit- Gross profit was $172.2 million or 31.2% of sales in 2015. This is an increase of $3.0 million from 2014 gross profit of $169.2 million or 31.1% of sales in 2014.

 

Selling, General and Administrative

 

Selling, general and administrative expenses were $77.7 million in 2015, an increase of $4.4 million from $73.4 million in 2014, and an increase from 13.5% of sales in 2014 to 14.1% of sales in 2015. The increase in selling, general and administrative expenses is primarily attributable to increased promotional selling expenses, including a new, summer round of promotions, the “2 Million Gun Challenge to Benefit the NRA” which was not in effect in 2014, and the $2.9 million cost of protecting distributor inventory related to the price reduction in the Ruger LCP.

 

Defined Benefit Pension Plans Settlement Charge

 

The Company fully funded and terminated its hourly and salaried defined-benefit pension plans in accordance with Internal Revenue Service and Pension Benefit Guaranty Corporation requirements in 2014. The settlement and termination of the frozen pension plans resulted in a cash payment of $7.5 million and an income statement expense of $40.9 million in 2014.

 

Other Operating Income, net

 

Other operating income, net consists of the following (in thousands):

 

   2015   2014 
         
Gain on sale of operating assets  $113   $1 
Frozen defined-benefit pension plan income       1,611 
           
Total other operating income, net  $113   $1,612 

 

 

38 

Table of Contents 

Operating Income

 

Operating income was $94.5 million or 17.2% of sales in 2015. This is an increase of $38.2 million from 2014 operating income of $56.3 million or 10.4% of sales.

 

Royalty Income

 

Royalty income increased to $1.1 million in 2015 from $0.5 million in 2014.

 

Interest Income

 

Interest income was negligible in 2015 and 2014.

 

Interest Expense

 

Interest expense was negligible in 2015 and 2014.

 

Other Income (Expense), Net

 

Other income (expense), net was income of $0.6 million in 2015, unchanged from income of $0.6 million in 2014.

 

Income Taxes and Net Income

 

The effective income tax rate was 35.4% in 2015 and 32.5% in 2014. The increase in the effective tax rate is primarily attributable to a decrease in the domestic production activities deduction in 2015 compared to 2014.

 

As a result of the foregoing factors, consolidated net income was $62.1 million in 2015. This represents an increase of $23.5 million from 2014 consolidated net income of $38.6 million.

 

Non-GAAP Financial Measure

 

In an effort to provide investors with additional information regarding its results, the Company refers to various United States generally accepted accounting principles (“GAAP”) financial measures and one non-GAAP financial measure, EBITDA, which management believes provides useful information to investors. This non-GAAP measure may not be comparable to similarly titled measures being disclosed by other companies. In addition, the Company believes that the non-GAAP financial measure should be considered in addition to, and not in lieu of, GAAP financial measures. The Company believes that EBITDA is useful to understanding its operating results and the ongoing performance of its underlying business, as EBITDA provides information on the Company’s ability to meet its capital expenditure and working capital requirements, and is also an indicator of profitability. The Company believes that this reporting provides better transparency and comparability to its operating results. The Company uses both GAAP and non-GAAP financial measures to evaluate the Company’s financial performance.

 

39 

Table of Contents 

Non-GAAP Reconciliation – EBITDA

EBITDA

(Unaudited, dollars in thousands)

 

Year ended December 31,  2015   2014 
         
Net income  $62,126   $38,628 
           
Income tax expense   33,974    18,612 
Depreciation and amortization expense   36,235    36,706 
Interest expense   156    152 
Interest income   (5)   (2)
Pension plan termination expense, net of cash payment       32,218 
EBITDA  $132,486   $126,314 

 

EBITDA is defined as earnings before interest, taxes, and depreciation and amortization. The Company calculates this by adding the amount of interest expense, income tax expense and depreciation and amortization expenses that have been deducted from net income back into net income, and subtracting the amount of interest income that was included in net income from net income to arrive at EBITDA. The Company’s EBITDA calculation also excludes any one-time non-cash, non-operating expense, such as the pension plan termination expense in 2014.

 

Financial Condition

 

Liquidity

 

At December 31, 2016, the Company had cash and cash equivalents of $87.1 million. Our pre-LIFO working capital of $185.8 million, less the LIFO reserve of $42.5 million, resulted in working capital of $142.7 million and a current ratio of 2.8 to 1.

 

Operations

 

Cash provided by operating activities was $104.8 million, $112.6 million, and $55.6 million in 2016, 2015, and 2014, respectively. The decrease in cash provided in 2016 compared to 2015 is attributable to an increase in inventory in 2016 compared to a decrease in 2015, partially offset by a decrease in accounts receivable in 2016 compared to an increase in 2015, and increased profitability in 2016.

 

The increase in cash provided in 2015 compared to 2014 is attributable to increased profitability, decreases in inventory and other assets and increases in accounts payable and accrued employee compensation during 2015, partially offset by an increase in accounts receivable during the same period.

 

40 

Table of Contents 

Third parties supply the Company with various raw materials for its firearms and castings, such as fabricated steel components, walnut, birch, beech, maple and laminated lumber for rifle stocks, wax, ceramic material, metal alloys, various synthetic products and other component parts. There is a limited supply of these materials in the marketplace at any given time, which can cause the purchase prices to vary based upon numerous market factors. The Company believes that it has adequate quantities of raw materials in inventory or on order to provide sufficient time to locate and obtain additional items at then-current market cost without interruption of its manufacturing operations. However, if market conditions result in a significant prolonged inflation of certain prices or if adequate quantities of raw materials cannot be obtained, the Company’s manufacturing processes could be interrupted and the Company’s financial condition or results of operations could be materially adversely affected.

 

Investing and Financing

 

Capital expenditures were $35.2 million, $28.7 million, and $45.6 million in 2016, 2015, and 2014, respectively. In 2017, the Company expects capital expenditures to approximate $40 million, much of which will relate to tooling and fixtures for new product introductions and to upgrade and modernize manufacturing equipment. Due to market conditions and business circumstances, actual capital expenditures could vary significantly from the budgeted amount. The Company finances, and intends to continue to finance, all of these activities with funds provided by operations and current cash.

 

In 2016, the Company repurchased 283,343 shares of its common stock for $14.0 million in the open market. The average price per share purchased was $49.43. These purchases were funded with cash on hand. In 2015, the Company repurchased 82,100 shares of its common stock for $2.8 million in the open market. The average price per share purchased was $34.57. These purchases were funded with cash on hand. In 2014, the Company repurchased approximately 680,800 shares of its common stock, representing 3.5% of the then outstanding shares, in the open market at an average price of $35.22 per share. These purchases were made with cash held by the Company and no debt was incurred.

 

From January 1, 2017 through February 17, 2017, the Company repurchased 633,600 shares of its common stock for $31.5 million in the open market. The average price per share purchased was $49.67. These purchases were funded with cash on hand.

 

At December 31, 2016, $59 million remained authorized for future share repurchases. At February 17, 2017, $27.5 million remained authorized for future share repurchases.

 

The Company paid dividends totaling $32.8 million, $20.6 million, and $31.4 million in 2016, 2015, and 2014, respectively. The dividend varies every quarter because the Company pays a percentage of earnings rather than a fixed amount per share. Since 2012, the Company’s practice has been to pay a dividend of approximately 40% of net income.

 

On February 17, 2017, the Company’s Board of Directors authorized a dividend of 44¢ per share to shareholders of record on March 17, 2017. The payment of future dividends depends on many

41 

Table of Contents 

factors, including internal estimates of future performance, then-current cash, and the Company’s need for funds.

 

The Company provides supplemental discretionary contributions to substantially all employees’ individual 401(k) accounts.

 

The Company fully funded and terminated its hourly and salaried defined-benefit pension plans in accordance with Internal Revenue Service and Pension Benefit Guaranty Corporation requirements in the fourth quarter of 2014. Plan participants were not adversely affected by the plan terminations, but rather had their benefits either converted into a lump sum cash payment or an annuity contract placed with an insurance carrier.

 

The settlement and termination of the frozen pension plans resulted in a cash payment of $7.5 million and an income statement expense of $41.0 million in the fourth quarter of 2014.

 

The Company contributed $7.5 million, and $3.0 million to the frozen pension plans in 2014 and 2013. Since the plans have been fully funded, settled, and terminated, no further cash contributions were made in 2015 or will be required in future years.

 

Based on its unencumbered assets, the Company believes it has the ability to raise cash through issuance of short-term or long-term debt. The Company’s unsecured $40 million credit facility, which expires on June 15, 2017, remained unused at December 31, 2016 and the Company has no debt.

 

Contractual Obligations

 

The table below summarizes the Company’s significant contractual obligations at December 31, 2016, and the effect such obligations are expected to have on the Company’s liquidity and cash flows in future periods. This table excludes amounts already recorded on the Company’s balance sheet as current liabilities at December 31, 2016.

 

“Purchase Obligations” as used in the below table includes all agreements to purchase goods or services that are enforceable and legally binding on the Company and that specify all significant terms, including: fixed or minimum quantities to be purchased; fixed, minimum or variable price provisions; and the approximate timing of the transaction. Certain of the Company’s purchase orders or contracts for the purchase of raw materials and other goods and services that may not necessarily be enforceable or legally binding on the Company are also included in “Purchase Obligations” in the table, and, therefore, certain of the Company’s purchase orders or contracts included in the table may represent authorizations to purchase rather than legally binding agreements. The Company expects to fund all of these commitments with cash flows from operations and current cash.

42 

Table of Contents 

  

Payment due by period (in thousands)
Contractual Obligations
 
  Total
 
   Less than
1 year
   1-3 years
 
   3-5 years
 
   More
than 5
years
 
Long-Term Debt Obligations                    
Capital Lease Obligations                    
Operating Lease Obligations  $461   $232   $229   $     
Purchase Obligations  $13,454   $13,454             
Other Long-Term Liabilities
     Reflected on the
     Registrant’s Balance
     Sheet under GAAP
                    
                          
Total  $13,915   $13,686   $229   $     

 

The expected timing of payment of the obligations discussed above is estimated based on current information. Timing of payments and actual amounts paid may be different depending on the time of receipt of goods or services or changes to agreed-upon amounts for some obligations.

 

Firearms Legislation and Litigation

 

See Item 1A - Risk Factors and Note 17 to the financial statements which are included in the Annual Report on Form 10-K for a discussion of firearms legislation and litigation.

 

Other Operational Matters

 

In the normal course of its manufacturing operations, the Company is subject to occasional governmental proceedings and orders pertaining to workplace safety, firearms serial number tracking and control, waste disposal, air emissions and water discharges into the environment. The Company believes that it is generally in compliance with applicable Bureau of Alcohol, Tobacco, Firearms & Explosives, environmental, and safety regulations and the outcome of any proceedings or orders will not have a material adverse effect on the financial position or results of operations of the Company.

 

The Company self-insures a significant amount of its product liability, workers’ compensation, medical, and other insurance. It also carries significant deductible amounts on various insurance policies.

 

The Company expects to realize its deferred tax assets through tax deductions against future taxable income.

 

Critical Accounting Policies and Estimates

 

The preparation of financial statements in accordance with accounting principles generally accepted in the United States requires management to make assumptions and estimates that

43 

Table of Contents 

affect the reported amounts of assets and liabilities as of the balance sheet date and net sales and expenses recognized and incurred during the reporting period then ended. The Company bases estimates on prior experience, facts and circumstances, and other assumptions, including those reviewed with actuarial consultants and independent counsel, when applicable, that are believed to be reasonable. However, actual results may differ from these estimates.

 

The Company believes the determination of its product liability accrual is a critical accounting policy. The Company’s management reviews every lawsuit and claim and is in contact with independent and corporate counsel on an ongoing basis. The provision for product liability claims is based upon many factors, which vary for each case. These factors include the type of claim, nature and extent of injuries, historical settlement ranges, jurisdiction where filed, and advice of counsel. An accrual is established for each lawsuit and claim, when appropriate, based on the nature of each such lawsuit or claim.

 

Amounts are charged to product liability expense in the period in which the Company becomes aware that a claim or, in some instances a threat of a claim, has been made when potential losses or costs of defense are probable and can be reasonably estimated. Such amounts are determined based on the Company’s experience in defending similar claims. Occasionally, charges are made for claims made in prior periods because the cumulative actual costs incurred for that claim, or reasonably expected to be incurred in the future, exceed amounts already provided with respect to such claims. Likewise, credits may be taken if cumulative actual costs incurred for that claim, or reasonably expected to be incurred in the future, are less than amounts previously provided.

 

While it is not possible to forecast the outcome of litigation or the timing of related costs, in the opinion of management, after consultation with independent and corporate counsel, there is a remote likelihood that litigation, including punitive damage claims, will have a material adverse effect on the financial position of the Company, but such litigation may have a material impact on the Company’s financial results for a particular period.

 

The Company believes the valuation of its inventory and the related excess and obsolescence reserve is also a critical accounting policy. Inventories are carried at the lower of cost, principally determined by the last-in, first-out (LIFO) method, or market. An actual valuation of inventory under the LIFO method is made at the end of each year based on the inventory levels and prevailing inventory costs existing at that time.

 

The Company determines its excess and obsolescence reserve by projecting the year in which inventory will be consumed into a finished product. Given ever-changing market conditions, customer preferences and the anticipated introduction of new products, it does not seem prudent nor supportable to carry inventory at full cost beyond that needed during the next 36 months.

 

Recent Accounting Pronouncements

 

In November 2015, the Financial Accounting Standards Board (“FASB”) issued Accounting Standard Update (“ASU”) 2015-17, Income Taxes (Topic 740): Balance Sheet Classification of Deferred Taxes. This ASU simplifies the presentation of deferred income taxes by eliminating

44 

Table of Contents 

the requirement for entities to separate deferred tax liabilities and assets into current and noncurrent amounts in classified balance sheets. Instead, it requires deferred tax assets and liabilities be classified as noncurrent in the balance sheet. ASU 2015-17 is effective for financial statements issued for annual periods beginning after December 15, 2016. This ASU is not expected to have a material impact on our consolidated financial statements.

 

In May 2014, the FASB issued ASU 2014-09, Revenue from Contracts with Customers (Topic 606), requiring an entity to recognize the amount of revenue to which it expects to be entitled for the transfer of promised goods or services to customers. The updated standard will replace most existing revenue recognition guidance in U.S. GAAP when it becomes effective and permits the use of either a full retrospective or retrospective with cumulative effect transition method. In August 2015, the FASB issued ASU 2015-14 which defers the effective date of ASU 2014-09 one year making it effective for annual reporting periods beginning after December 15, 2017. We plan to adopt the provisions of ASU 2014-09 on a modified retrospective basis. We do not expect the adoption of ASU 2014-09 to have a material impact on our consolidated revenue. We continue to assess the overall impact the adoption of ASU 2014-09 will have on our consolidated financial statements.

 

In February 2016, the FASB issued ASU 2016-02, "Leases" (ASU 2016-02), which requires companies to recognize leased assets and liabilities for both capital and operating leases. ASU 2016-02 is effective for public business entities for fiscal years beginning after December 15, 2018, including interim periods within those fiscal years, with early adoption permitted. Companies are required to adopt the guidance using a modified retrospective method. While the Company is currently assessing the impact ASU 2016-02 will have on the consolidated financial statements, the adoption of this standard is not expected to have a material impact to our consolidated financial position.

 

Forward-Looking Statements and Projections

 

The Company may, from time to time, make forward-looking statements and projections concerning future expectations. Such statements are based on current expectations and are subject to certain qualifying risks and uncertainties, such as market demand, sales levels of firearms, anticipated castings sales and earnings, the need for external financing for operations or capital expenditures, the results of pending litigation against the Company, the impact of future firearms control and environmental legislation and accounting estimates, any one or more of which could cause actual results to differ materially from those projected. Words such as “expect,” “believe,” “anticipate,” “intend,” “estimate,” “will,” “should,” “could” and other words and terms of similar meaning, typically identify such forward-looking statements. Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date made. The Company undertakes no obligation to publish revised forward-looking statements to reflect events or circumstances after the date such forward-looking statements are made or to reflect the occurrence of subsequent unanticipated events.

 

45 

Table of Contents 

 

ITEM 7A—QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

 

The Company is exposed to changing interest rates on its investments, which consist primarily of United States Treasury instruments with short-term (less than one year) maturities and cash. The interest rate market risk implicit in the Company's investments at any given time is low, as the investments mature within short periods and the Company does not have significant exposure to changing interest rates on invested cash.

 

The Company has not undertaken any actions to cover interest rate market risk and is not a party to any interest rate market risk management activities.

 

A hypothetical 100 basis point change in market interest rates over the next year would not materially impact the Company’s earnings or cash flows. A hypothetical 100 basis point change in market interest rates would not have a material effect on the fair value of the Company’s investments.

 

46 

Table of Contents 

 

ITEM 8—FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

 

 

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

 

 

 

 

Reports of Independent Registered Public Accounting Firm

 

 

48

   
Consolidated Balance Sheets at December 31, 2016 and 2015 50
   
Consolidated Statements of Income and Comprehensive Income for the years ended December 31, 2016, 2015 and 2014

 

52

   
Consolidated Statements of Stockholders’ Equity for the years ended December 31, 2016, 2015 and 2014

 

53

   
Consolidated Statements of Cash Flows for the years ended December 31, 2016, 2015 and 2014

 

54

   
Notes to Consolidated Financial Statements 55
   
   

 

47 

Table of Contents 

Report of Independent Registered Public Accounting Firm

 

To the Board of Directors and Stockholders

Sturm, Ruger & Company, Inc. and Subsidiary

 

We have audited Sturm, Ruger & Company, Inc. and Subsidiary's (“the Company”) internal control over financial reporting as of December 31, 2016, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission in 2013. The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Report on Internal Control over Financial Reporting appearing under Item 9A. Our responsibility is to express an opinion on the Company's internal control over financial reporting based on our audit.

 

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

 

A company's internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company's internal control over financial reporting includes those policies and procedures that (a) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (b) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (c) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company's assets that could have a material effect on the financial statements.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

In our opinion, Sturm, Ruger & Company, Inc. and Subsidiary maintained, in all material respects, effective internal control over financial reporting as of December 31, 2016, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission in 2013.

 

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Sturm, Ruger & Company, Inc. and Subsidiary as of December 31, 2016 and 2015, and the related consolidated statements of income and comprehensive income, stockholders’ equity, and cash flows for each of the three years in the period ended December 31, 2016, and our report dated February 22, 2017 expressed an unqualified opinion.

 

/s/RSM US LLP

Stamford, Connecticut

February 22, 2017

48 

Table of Contents 

 

Report of Independent Registered Public Accounting Firm

 

To the Board of Directors and Stockholders

Sturm, Ruger & Company, Inc. and Subsidiary

 

We have audited the accompanying consolidated balance sheets of Sturm, Ruger & Company, Inc. and Subsidiary as of December 31, 2016 and 2015, and the related consolidated statements of income and comprehensive income, stockholders’ equity, and cash flows for each of the three years in the period ended December 31, 2016. Our audits also included the financial statement schedule of Sturm, Ruger & Company, Inc. and Subsidiary (“the Company”) listed in Item 15(a). These consolidated financial statements and financial statement schedule are the responsibility of the Company's management. Our responsibility is to express an opinion on these consolidated financial statements and schedule based on our audits.

 

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

 

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Sturm, Ruger & Company, Inc. and Subsidiary as of December 31, 2016 and 2015, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2016, in conformity with U.S. generally accepted accounting principles. Also, in our opinion, the related financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly in all material respects the information set forth therein.

 

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Sturm, Ruger & Company, Inc. and Subsidiary’s internal control over financial reporting as of December 31, 2016, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission in 2013, and our report dated February 22, 2017 expressed an unqualified opinion on the effectiveness of Sturm, Ruger & Company, Inc. and Subsidiary’s internal control over financial reporting.

 

 

/s/RSM US LLP

Stamford, Connecticut

February 22, 2017

49 

Table of Contents 

 

Consolidated Balance Sheets

(Dollars in thousands, except per share data)

 

December 31,  2016   2015 
         

Assets

 

          
Current Assets          
Cash and cash equivalents  $87,126   $69,225 
Trade receivables, net   69,442    71,721 
           
Gross inventories   99,417    81,278 
    Less LIFO reserve   (42,542)   (42,061)
    Less excess and obsolescence reserve   (2,340)   (2,118)
    Net inventories   54,535    37,099 
           
Deferred income taxes   8,859    8,219 
Prepaid expenses and other current assets   3,660    3,008 
Total Current Assets   223,622    189,272 
           
Property, Plant, and Equipment   331,639    308,597 
     Less allowances for depreciation   (227,398)   (204,777)
     Net property, plant and equipment   104,241    103,820 
           
Other assets   27,541    22,791 
Total Assets  $355,404   $315,883 

 

See accompanying notes to consolidated financial statements.

 

50 

Table of Contents 

 

December 31,  2016   2015 
         

Liabilities and Stockholders’ Equity

 

          
Current Liabilities          
Trade accounts payable and accrued expenses  $48,493   $42,991 
Product liability   1,733    642 
Employee compensation and benefits   25,467    28,298 
Workers’ compensation   5,200    5,100 
Income taxes payable       4,962 
Total Current Liabilities   80,893    81,993 
           
Product liability   86    102 
Deferred income taxes   8,525    6,050 
           
Contingent liabilities (Note 17)        
           
Stockholders’ Equity          
Common stock, non-voting, par value $1:
     Authorized shares – 50,000; none issued
          
Common stock, par value $1:
     Authorized shares – 40,000,000
     2016 – 24,034,201 issued,
                 18,688,511 outstanding
     2015 – 23,775,766 issued,
                 18,713,419 outstanding
   24,034    23,776 
Additional paid-in capital   27,211    29,591 
Retained earnings   293,400    239,098 
Less: Treasury stock – at cost
     2016 – 5,345,690 shares
     2015 – 5,062,347 shares
   (78,745)   (64,727)
Total Stockholders’ Equity   265,900    227,738 
Total Liabilities and Stockholders’ Equity  $355,404   $315,883 

 

See accompanying notes to consolidated financial statements.

51 

Table of Contents 

 

Consolidated Statements of Income and Comprehensive Income

(In thousands, except per share data)

 

Year ended December 31,  2016   2015   2014 
             
Net firearms sales  $658,433   $544,850   $542,267 
Net castings sales   5,895    6,244    2,207 
Total net sales   664,328    551,094    544,474 
                
Cost of products sold   444,774    378,934    375,300 
                
Gross profit   219,554    172,160    169,174 
                
Operating Expenses:               
Selling   56,146    49,864    44,550 
General and administrative   29,004    27,864    28,899 
Defined benefit pension plans settlement charge           40,999 
Other operating income, net   (5)   (113)   (1,612)
Total operating expenses   85,145    77,615    112,836 
                
Operating income   134,409    94,545    56,338 
                
Other income:               
Royalty income   1,142    1,084    468 
Interest income   14    5    2 
Interest expense   (186)   (156)   (152)
Other income (expense), net   542    622    584 
Total other income, net   1,512    1,555    902 
                
Income before income taxes   135,921    96,100    57,240 
                
Income taxes   48,449    33,974    18,612 
                
Net income and comprehensive income  $87,472   $62,126   $38,628 
                
                
Basic Earnings Per Share  $4.62   $3.32   $1.99 
                
Diluted Earnings Per Share  $4.59   $3.21   $1.95 
                
Cash Dividends Per Share  $1.73   $1.10   $1.62 

See accompanying notes to consolidated financial statements.

52 

Table of Contents 

Consolidated Statements of Stockholders’ Equity

(Dollars in thousands)

 

   Common
Stock
   Additional
Paid-in
Capital
   Retained
Earnings
   Treasury
Stock
   Accumulated
Other
Comprehensive
Loss
   Total 
                         
Balance at December 31, 2013  $23,647   $20,614   $192,088   $(37,884)  $(19,379)  $179,086 
Net income             38,628              38,628 
Settlement of pension liability, net of deferred taxes of  $11,157                       19,379    19,379 
Dividends paid             (31,446)             (31,446)
Stock-based compensation        5,647                   5,647 
Exercise of stock options and vesting of RSU’s        (2,340)                  (2,340)
Tax benefit realized from exercise of stock options and vesting of RSU’s        1,621                   1,621 
Common stock issued – compensation plans   70    (70)                   
Unpaid dividends accrued             (1,111)             (1,111)
Repurchase of 680,813 shares of
common stock
                  (24,002)        (24,002)
Balance at December 31, 2014   23,717    25,472    198,159    (61,886)       185,462 
Net income             62,126              62,126 
Dividends paid             (20,569)             (20,569)
Stock-based compensation        4,530                   4,530 
Exercise of stock options and vesting of RSU’s        (788)                  (788)
Tax benefit realized from exercise of stock options and vesting of RSU’s        436                   436 
Common stock issued – compensation plans   59    (59)                   
Unpaid dividends accrued             (618)             (618)
Repurchase of 82,100 shares of
common stock
                  (2,841)        (2,841)
Balance at December 31, 2015   23,776    29,591    239,098    (64,727)       227,738 
Net income             87,472              87,472 
Dividends paid             (32,815)             (32,815)
Stock-based compensation        3,054                   3,054 
Exercise of stock options and vesting of RSU’s        (14,002)                  (14,002)
Tax benefit realized from exercise of stock options and vesting of RSU’s        8,826                   8,826 
Common stock issued – compensation plans   258    (258)                   
Unpaid dividends accrued             (355)             (355)
Repurchase of 283,343 shares of
common stock
                  (14,018)        (14,018)
Balance at December 31, 2016  $24,034   $27,211   $293,400   $(78,745)  $   $265,900 

 

See accompanying notes to consolidated financial statements.

53 

Table of Contents 

Consolidated Statements of Cash Flows

(In thousands)

 

Year ended December 31,  2016   2015   2014 
             
Operating Activities               
Net income  $87,472   $62,126   $38,628 
Adjustments to reconcile net income to cash
provided by operating activities:
               
Pension plan settlement charge           32,218 
Depreciation and amortization   35,355    36,235    36,706 
Stock-based compensation   3,054    4,530    5,647 
Excess and obsolescence inventory reserve   522    (1,468)   1,347 
Loss (gain) on sale of assets   59    (113)   (1)
Deferred income taxes   1,836    (3,257)   (12,015)
Impairment of assets           178 
Changes in operating assets and liabilities:               
Trade receivables   2,279    (21,986)   17,649 
Inventories   (17,958)   9,058    (22,775)
Trade accounts payable and accrued expenses   5,602    6,808    (11,047)
Employee compensation and benefits   (3,186)   9,378    (17,435)
Product liability   1,075    (101)   (391)
Prepaid expenses, other assets and other liabilities   (6,348)   6,553    (13,075)
Income taxes payable   (4,962)   4,806    (83)
Cash provided by operating activities   104,800    112,569    55,551 
                
Investing Activities               
Property, plant, and equipment additions   (35,215)   (28,705)   (45,571)
Net proceeds from sale of assets   325    222    24 
Cash used for investing activities   (34,890)   (28,483)   (45,547)
                
Financing Activities               
Dividends paid   (32,815)   (20,569)   (31,446)
Tax benefit from share-based compensation   8,825    436    1,621 
Repurchase of common stock   (14,018)   (2,841)   (24,002)
Payment of employee withholding tax related to  share-based compensation   (14,001)   (999)   (2,363)
Proceeds from exercise of stock options       211    23 
Cash used for financing activities   (52,009)   (23,762)   (56,167)
                
Increase (decrease) in cash and cash equivalents   17,901    60,324    (46,163)
Cash and cash equivalents at beginning of year   69,225    8,901    55,064 
Cash and cash equivalents at end of year  $87,126   $69,225   $8,901 

 

See accompanying notes to consolidated financial statements.

54 

Table of Contents 

 

Notes to Consolidated Financial Statements

(Dollars in thousands, except per share)

 

1.Summary of Significant Accounting Policies

 

Organization

 

Sturm, Ruger & Company, Inc. (the “Company”) is principally engaged in the design, manufacture, and sale of firearms to domestic customers. Approximately 99% of sales were from firearms. Export sales represented approximately 3% of firearms sales. The Company’s design and manufacturing operations are located in the United States and almost all product content is domestic. The Company’s firearms are sold through a select number of independent wholesale distributors principally to the commercial sporting market.

 

The Company manufactures investment castings made from steel alloys and metal injection molding (“MIM”) parts for internal use in its firearms and utilizes available capacity to manufacture and sell investment castings and MIM parts to unaffiliated, third-party customers. Castings were approximately 1% of the Company’s total sales for the year ended December 31, 2016.

 

Preparation of Financial Statements

 

The Company follows United States generally accepted accounting principles (“GAAP”). The preparation of financial statements in conformity with GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from these estimates.

 

The significant accounting policies described below, together with the notes that follow, are an integral part of the Financial Statements.

 

Principles of Consolidation

 

The consolidated financial statements include the accounts of the Company and its wholly owned subsidiary. All significant intercompany accounts and transactions have been eliminated.

 

Revenue Recognition

 

Substantially all product sales are sold FOB (free on board) shipping point. Revenue is recognized when product is shipped and the customer takes ownership and assumes the risk of loss. Accruals are made for sales discounts and incentives based on the Company’s experience. The Company accounts for cash sales discounts as a reduction in sales and sales incentives as a charge to selling expense. Amounts billed to customers for shipping and handling fees are included in net sales and costs incurred by the Company for the delivery of goods are classified as selling expenses. Federal excise taxes are excluded from net sales.

55 

Table of Contents 

Cash and Cash Equivalents

 

The Company considers interest-bearing deposits with financial institutions with remaining maturities of three months or less at the time of acquisition to be cash equivalents.

 

Accounts Receivable

 

The Company establishes an allowance for doubtful accounts based on the creditworthiness of its customers and historical experience. While the Company uses the best information available to make its evaluation, future adjustments to the allowance for doubtful accounts may be necessary if there are significant changes in economic and industry conditions or any other factors considered in the Company’s evaluation. Bad debt expense has been immaterial during each of the last three years.

 

Inventories

 

Substantially all of the Company’s inventories are valued at the lower of cost, principally determined by the last-in, first-out (LIFO) method, or market. Elements of cost in inventories include raw materials, direct labor and manufacturing overhead.

 

Property, Plant, and Equipment

 

Property, plant, and equipment are carried at cost. Depreciation is computed over useful lives using the straight-line and declining balance methods predominately over 15 years for buildings, 7 years for machinery and equipment and 3 years for tools and dies. When assets are retired, sold or otherwise disposed of, their gross carrying values and related accumulated depreciation are removed from the accounts and a gain or loss on such disposals is recognized when appropriate.

 

Maintenance and repairs are charged to operations; replacements and improvements are capitalized.

 

Long-lived Assets

 

The Company evaluates the carrying value of long-lived assets to be held and used when events or changes in circumstances indicate the carrying value may not be recoverable. In performing this review, the carrying value of the assets is compared to the projected undiscounted cash flows to be generated from the assets. If the sum of the undiscounted expected future cash flows is less than the carrying value of the assets, the assets are considered to be impaired. Impairment losses are measured as the amount by which the carrying value of the assets exceeds their fair value. The Company bases fair value of the assets on quoted market prices if available or, if not available, quoted market prices of similar assets. Where quoted market prices are not available, the Company estimates fair value using the estimated future cash flows generated by the assets discounted at a rate commensurate with the risks associated with the recovery of the assets.

 

56 

Table of Contents 

 

Income Taxes

 

Income taxes are accounted for using the asset and liability method. Under this method, deferred income taxes are recognized for the tax consequences of “temporary differences” by applying enacted statutory rates applicable to future years to temporary differences between the financial statement carrying amounts and the tax basis of the Company’s assets and liabilities.

 

Product Liability

 

The Company provides for product liability claims including estimated legal costs to be incurred defending such claims. The provision for product liability claims is charged to cost of products sold.

 

Advertising Costs

 

The Company expenses advertising costs as incurred. Advertising expenses for 2016, 2015, and 2014, were $2.9 million, $3.0 million, and $3.6 million, respectively.

 

Shipping Costs

 

Costs incurred related to the shipment of products are included in selling expense. Such costs totaled $5.7 million, $6.4 million, and $7.1 million in 2016, 2015, and 2014, respectively.

 

Research and Development

 

In 2016, 2015, and 2014, the Company spent approximately $8.7 million, $8.5 million, and $10.0 million, respectively, on research and development activities relating to new products and the improvement of existing products. These costs are expensed as incurred.

 

Earnings per Share

 

Basic earnings per share is based upon the weighted-average number of shares of common stock outstanding during the year. Diluted earnings per share reflect the impact of options, restricted stock units, and deferred stock outstanding using the treasury stock method.

 

Recent Accounting Pronouncements

 

In November 2015, the Financial Accounting Standards Board (“FASB”) issued Accounting Standard Update (“ASU”) 2015-17, Income Taxes (Topic 740): Balance Sheet Classification of Deferred Taxes. This ASU simplifies the presentation of deferred income taxes by eliminating the requirement for entities to separate deferred tax liabilities and assets into current and noncurrent amounts in classified balance sheets. Instead, it requires deferred tax assets and liabilities be classified as noncurrent in the balance sheet. ASU 2015-17 is effective for financial statements issued for annual periods beginning after December 15, 2016. This ASU is not expected to have a material impact on our consolidated financial statements.

 

57 

Table of Contents 

In May 2014, the FASB issued ASU 2014-09, Revenue from Contracts with Customers (Topic 606), requiring an entity to recognize the amount of revenue to which it expects to be entitled for the transfer of promised goods or services to customers. The updated standard will replace most existing revenue recognition guidance in U.S. GAAP when it becomes effective and permits the use of either a full retrospective or retrospective with cumulative effect transition method. In August 2015, the FASB issued ASU 2015-14 which defers the effective date of ASU 2014-09 one year making it effective for annual reporting periods beginning after December 15, 2017. We plan to adopt the provisions of ASU 2014-09 on a modified retrospective basis. We do not expect the adoption of ASU 2014-09 to have a material impact on our consolidated revenue. We continue to assess the overall impact the adoption of ASU 2014-09 will have on our consolidated financial statements.

 

In February 2016, the FASB issued ASU 2016-02, "Leases" (ASU 2016-02), which requires companies to recognize leased assets and liabilities for both capital and operating leases. ASU 2016-02 is effective for public business entities for fiscal years beginning after December 15, 2018, including interim periods within those fiscal years, with early adoption permitted. Companies are required to adopt the guidance using a modified retrospective method. While the Company is currently assessing the impact ASU 2016-02 will have on the consolidated financial statements, the adoption of this standard is not expected to have a material impact to our consolidated financial position.

 

2.Trade Receivables, Net

 

Trade receivables consist of the following:

 

December 31,  2016   2015 
         
Trade receivables  $71,247   $73,564 
Allowance for doubtful accounts   (400)   (400)
Allowance for discounts   (1,405)   (1,443)
   $69,442   $71,721 

 

In 2016, the largest individual trade receivable balances accounted for 19%, 15%, 14%, and 11% of total trade receivables, respectively.

 

In 2015, the largest individual trade receivable balances accounted for 24%, 21%, 12%, and 12% of total trade receivables, respectively.

 

58 

Table of Contents 

3.Inventories

 

Inventories consist of the following:

 

December 31,  2016   2015 
         
Finished goods  $24,099   $16,637 
Materials and products in process   72,978    62,523 
    97,077    79,160 
Adjustment of inventories to a LIFO basis   (42,542)   (42,061)
   $54,535   $37,099 

 

In 2015, inventory quantities were reduced. This reduction resulted in a liquidation of LIFO inventory quantities carried at lower costs prevailing in prior years as compared with the current cost of purchases, the effect of which decreased costs of products sold by approximately $0.1 million in 2015.

 

4.       Property, Plant and Equipment

 

Property, plant and equipment consist of the following:

 

December 31,  2016   2015 
         
Land and improvements  $1,986   $1,930 
Buildings and improvements   49,183    46,354 
Machinery and equipment   242,169    216,055 
Dies and tools   38,301    44,258 
   $331,639   $308,597 

 

In 2013, the Company revised its estimate of the useful life of machinery and equipment from 10 to 7 years. This change, which became effective December 31, 2013, resulted in increased depreciation expense of $2.5 million and $7.1 million for 2015 and 2014, respectively, and a decrease in depreciation expense of $1.2 million in 2016.

 

59 

Table of Contents 

5.       Other Assets

 

Other assets consist of the following:

 

December 31,  2016   2015 
         
Patents, at cost  $6,525   $6,322 
Accumulated amortization   (3,915)   (3,629)
Deposits on capital items   21,436    16,839 
Software development costs, at cost       2,057 
Accumulated amortization       (1,792)
Other   3,495    2,994 
   $27,541   $22,791 

 

The capitalized cost of patents is amortized using the straight-line method over their useful lives. The cost of patent amortization was $0.3 million, $0.3 million, and $0.3 million in 2016, 2015, and 2014, respectively. The estimated annual patent amortization cost for each of the next five years is $0.3 million. Costs incurred to maintain existing patents are charged to expense in the year incurred.

 

Software development costs were incurred to develop and implement an integrated ERP system prior to the time the system became operational. These costs were capitalized and amortized using the straight line method over a period of sixty months. They became completely amortized in 2016. Costs incurred subsequent to the system becoming operational are being expensed. The cost of software development cost amortization was $0.3 million, $0.4 million, and $0.4 million in 2016, 2015, and 2014, respectively.

 

6.       Trade Accounts Payable and Accrued Expenses

 

Trade accounts payable and accrued expenses consist of the following:

 

December 31,  2016   2015 
         
Trade accounts payable  $16,973   $13,073 
Federal excise taxes payable   14,275    13,945 
Accrued other   17,245    15,973 
   $48,493   $42,991 

 

7.       Line of Credit

 

The Company has an unsecured $40 million revolving line of credit with a bank. This facility, which is renewable annually, has an expiration date of June 15, 2017.

 

The credit facility remained unused throughout 2015 and 2016. Borrowings under this facility would bear interest at LIBOR (1.687% at December 31, 2016) plus 200 basis points and the Company is charged three-eighths of a percent (0.375%) per year on the unused portion. At

60 

Table of Contents 

December 31, 2016 and 2015, the Company was in compliance with the terms and covenants of the credit facility.

 

8.       Employee Benefit Plans

 

Defined-Contribution Plan

The Company sponsors a qualified defined-contribution 401(k) plan that covers substantially all of its employees. Under the terms of the 401(k) plan, the Company matches a certain portion of employee contributions to their individual 401(k) accounts using the “safe harbor” guidelines provided in the Internal Revenue Code. Expenses related to matching employee contributions to the 401(k) plan were $3.7 million, $3.3 million, and $3.2 million in 2016, 2015, and 2014, respectively.

 

Additionally, in 2016, 2015, and 2014 the Company provided discretionary supplemental contributions to the individual 401(k) accounts of substantially all employees. Each employee received a supplemental contribution to their account based on a uniform percentage of qualifying compensation established annually. The cost of these supplemental contributions totaled $6.0 million, $5.0 million, and $5.6 million in 2016, 2015, and 2014, respectively.

 

Defined-Benefit Plans

 

The Company previously sponsored two qualified defined-benefit pension plans that covered substantially all employees. In 2007, the Company amended its defined-benefit pension plans so that employees no longer accrued benefits under them. This action “froze” the benefits for all employees and prevented future hires from joining the plans.

 

In December 2014 the Company terminated its defined benefit pension plans and settled all obligations to employees. As a result of the termination of the plans, the Company recognized an expense of $41.0 million in the fourth quarter of 2014, primarily comprised of the recognition of previously deferred actuarial losses.

 

Active employees, all of whom were 100 percent vested in their pension benefits, were given the option of rolling the actuarially determined present value of their benefits into their 401(k) accounts, receiving deferred annuity contracts issued by an insurance carrier, or receiving a lump sum payment.

 

The Company contributed $7.5 million to the frozen pension plans in 2014 in order to fully fund the settlement, representing the shortfall of the existing pension fund assets on the termination date to the settlement value. Since the plans have been fully funded and settled, no cash contributions were required in 2015 or 2016, nor will any be required in future years.

 

In conjunction with the termination and settlement of the defined-benefit pension plans, the additional minimum pension liability was fully recognized in 2014. The Company recorded an adjustment to the additional minimum pension liability, net of tax, which increased comprehensive income by $19.4 million in 2014.

 

61 

Table of Contents 

 

9.       Other Operating Income, net

 

Other operating income, net consists of the following:

 

Year ended December 31,  2016   2015   2014 
             
Gain on sale of operating assets  $5   $113   $1 
Frozen defined-benefit pension plan income           1,611 
Total other operating income, net  $5   $113   $1,612 

 

10.       Income Taxes

 

The Company files income tax returns in the U.S. federal jurisdiction and various state jurisdictions. With few exceptions, the Company is no longer subject to U.S. federal and state income tax examinations by tax authorities for years before 2013.

 

The federal and state income tax provision consisted of the following:

 

Year ended December 31,  2016   2015   2014 
   Current   Deferred   Current   Deferred   Current   Deferred 
Federal  $31,393   $10,181   $31,382   $(2,774)  $25,797   $(10,429)
State   5,678    1,197    5,849    (483)   5,019    (1,775)
   $37,071   $11,378   $37,231   $(3,257)  $30,816   $(12,204)

 

The effective income tax rate varied from the statutory federal income tax rate as follows:

 

Year ended December 31,  2016   2015   2014 
Statutory federal income tax rate   35.0%   35.0%   35.0%
State income taxes, net of federal tax benefit   3.3    3.6    3.7 
Domestic production activities deduction   (2.3)   (3.2)   (4.6)
Other items   (0.4)       (1.6)
Effective income tax rate   35.6%   35.4%   32.5%

 

62 

Table of Contents 

Significant components of the Company’s deferred tax assets and liabilities are as follows:

 

December 31,  2016   2015 
Deferred tax assets          
Product Liability  $655   $263 
Employee compensation and benefits   3,627    3,822 
Allowances for doubtful accounts and discounts   3,813    3,454 
Inventories   981    886 
Stock-based compensation   2,527    5,410 
Other   1,533    1,623 
Total deferred tax assets   13,136    15,458 
Deferred tax liabilities:          
Depreciation   12,457    12,946 
Other   345    343 
Total deferred tax liabilities   12,802    13,289 
Net deferred tax assets  $334   $2,169 

 

The Company made income tax payments of approximately $43.0 million, $27.5 million, and $34.0 million, during 2016, 2015, and 2014, respectively. The Company expects to realize its deferred tax assets through tax deductions against future taxable income or carry back against taxes previously paid.

 

The Company does not believe it has included any “uncertain tax positions” in its federal income tax return or any of the state income tax returns it is currently filing. The Company has made an evaluation of the potential impact of additional state taxes being assessed by jurisdictions in which the Company does not currently consider itself liable. The Company does not anticipate that such additional taxes, if any, would result in a material change to its financial position.

 

11.       Earnings Per Share

 

Set forth below is a reconciliation of the numerator and denominator for basic and diluted earnings per share calculations for the periods indicated:

 

Year ended December 31,  2016   2015   2014 
             
Numerator:               
Net income  $87,472   $62,126   $38,628 
Denominator:               
Weighted average number of common shares outstanding – Basic   18,931,415    18,696,659    19,367,928 
Dilutive effect of options and restricted stock units outstanding under the Company’s employee compensation plans   118,100    668,420    469,480 
Weighted average number of common shares outstanding – Diluted   19,049,515    19,365,079    19,837,408 

 

63 

Table of Contents 

The dilutive effect of outstanding options and restricted stock units is calculated using the treasury stock method. There are no anti-dilutive stock options in 2016, 2015, and 2014 because the closing price of the Company’s stock on December 31, 2016, 2015, and 2014 exceeded the strike price of all outstanding options on that date.

 

12.       Stock Repurchases

 

In 2016, 2015, and 2014 the Company repurchased shares of its common stock. Details of these purchases are as follows:

 

Period  Total
Number of
Shares
Purchased
   Average
Price Paid
per Share
   Total
Number of
Shares
Purchased
as Part of
Publicly
Announced
Program
   Maximum
Dollar
Value of
Shares that
May Yet Be
Purchased
Under the
Program
 
                 
November 13, 2014 to December 31, 2014   680,813   $35.22    680,813      
January 1, 2015 to January 4, 2015   82,100   $34.57    82,100      
November 2016   179,685   $49.11    179,685      
December 2016   103,658   $50.00    103,658      
Total   1,046,256   $39.06    1,046,256   $58,982,000 

 

All of these purchases were made with cash held by the Company and no debt was incurred.

 

At December 31, 2016, approximately $59 million remained authorized for share repurchases.

 

13.       Compensation Plans

 

In April 2007, the Company adopted and the shareholders approved the 2007 Stock Incentive Plan (the “2007 SIP”) under which employees, independent contractors, and non-employee directors may be granted stock options, restricted stock, deferred stock awards, restricted stock units (“RSU’s”), and stock appreciation rights, any of which may or may not require the achievement of performance objectives. Vesting requirements are determined by the Compensation Committee of the Board of Directors. The Company reserved 2,550,000 shares for issuance under the 2007 SIP. At December 31, 2016, an aggregate of 472,000 shares remain available for grant under the 2007 SIP.

 

Compensation expense related to stock options is recognized based on the grant-date fair value of the awards estimated using the Black-Scholes option pricing model. Compensation expense related to deferred stock, restricted stock, and restricted stock units is recognized based on the grant-date fair value of the Company’s common stock, using either the actual share price or estimated using the Monte Carlo valuation model The total stock-based compensation cost

64 

Table of Contents 

included in the Statements of Income was $3.1 million, $4.5 million, and $5.6 million in 2016, 2015, and 2014, respectively.

 

Stock Options

 

There were no stock options granted in 2016, 2015 or 2014.

 

The following table summarizes the stock option activity of the 2007 SIP:

 

   Shares   Weighted
Average
Exercise
Price
   Weighted
Average
Grant Date
Fair Value
   Weighted
Average
Remaining
Contractual
Life (Years)
 
Outstanding at December 31, 2013   57,221    8.66    6.65    5.0 
         Granted                
         Exercised   (16,244)   8.25    7.54    3.9 
         Canceled                
Outstanding at December 31, 2014   40,977    8.82    6.29    4.1 
         Granted                
         Exercised   (29,139)   8.77    6.13    3.1 
         Canceled                
Outstanding at December 31, 2015   11,838    8.95    6.69    3.3 
         Granted                
         Exercised                 
         Canceled                
Outstanding at December 31, 2016   11,838    8.95    6.69    2.3 
Exercisable Options Outstanding at December 31, 2016   11,838    8.95    6.69    2.3 
Non-Vested Options Outstanding at December 31, 2016                

 

At December 31, 2016, the aggregate intrinsic value of all options, including exercisable options, was $0.5 million.

 

Deferred Stock

 

Deferred stock awards vest based on the passage of time or the Company’s attainment of performance objectives. Upon vesting, these awards convert one-for-one to common stock.

 

In 2016, 3,881 deferred stock awards were issued to non-employee directors that will vest in May 2017 and 5,292 deferred stock awards were issued to non-employee directors that will vest in May 2019.

 

65 

Table of Contents 

In 2015, 4,000 deferred stock awards were issued to non-employee directors that vested in April 2016 and 5,370 deferred stock awards were issued to non-employee directors that will vest in April 2018.

 

In 2014, 3,711 deferred stock awards were issued to non-employee directors that vested in April 2015 and 7,002 deferred stock awards were issued to non-employee directors that will vest in April 2017.

 

Compensation expense related to these awards is amortized ratably over the vesting period. Compensation expense related to these awards was $0.6 million, $0.6 million and $0.6 million in 2016, 2015, and 2014, respectively.

 

At December 31, 2016, there was $0.6 million of unrecognized compensation cost related to deferred stock that is expected to be recognized over a period of three years.

 

Restricted Stock Units

 

The Company grants restricted stock units in lieu of incentive stock options to senior employees. Some of these RSU’s are retention awards and have only time-based vesting. Other RSU’s have a vesting “double trigger.” The vesting of these RSU’s is dependent on the achievement of corporate objectives established by the Compensation Committee of the Board of Directors and the passage of time.

 

During 2016, 61,000 restricted stock units were issued. Compensation costs related to these restricted stock units was $3.4 million, of which $0.8 million was recognized in 2016. The remaining costs will be recognized ratably over the remaining periods required before the units vest, which range from 27 to 49 months.

 

During 2015, 76,000 restricted stock units were issued. Compensation costs related to these restricted stock units was $1.9 million, of which $0.5 million was recognized in 2015. The remaining costs will be recognized ratably over the remaining periods required before the units vest, which range from 27 to 49 months.

 

During 2014, 59,000 restricted stock units were issued. Compensation costs related to these restricted stock units was $3.8 million, of which $1.0 million was recognized in 2014. The remaining costs are not being recognized since the required performance criteria is not expected to be attained.

 

At December 31, 2016, there was $3.4 million of unrecognized compensation cost related to restricted stock units that is expected to be recognized over a period of 4.0 years.

 

66 

Table of Contents 

14.       Operating Segment Information

 

The Company has two reportable operating segments: firearms and castings. The firearms segment manufactures and sells rifles, pistols, and revolvers principally to a number of federally-licensed, independent wholesale distributors primarily located in the United States. The castings segment manufactures and sells steel investment castings and metal injection molding parts.

 

Corporate segment income relates to interest income, the sale of non-operating assets, and other non-operating activities. Corporate segment assets consist of cash and other non-operating assets.

 

The Company evaluates performance and allocates resources, in part, based on profit and loss before taxes. The accounting policies of the reportable segments are the same as those described in the summary of significant accounting policies (see Note 1). Intersegment sales are recorded at the Company’s cost plus a fixed profit percentage.

 

Year ended December 31,  2016   2015   2014 
Net Sales               
    Firearms  $658,433   $544,850   $542,267 
    Castings               
        Unaffiliated   5,895    6,244    2,207 
        Intersegment   36,779    31,585    34,095 
    42,674    37,829    36,302 
    Eliminations   (36,779)   (31,585)   (34,095)
   $664,328   $551,094   $544,474 
Income (Loss) Before Income Taxes               
    Firearms  $136,390   $98,565   $57,525 
    Castings   (1,237)   (3,407)   (1,294)
    Corporate   768    942    1,009 
   $135,921   $96,100   $57,240 
Identifiable Assets               
    Firearms  $242,758   $221,670   $211,338 
    Castings   16,096    15,289    16,772 
    Corporate   96,550    78,924    26,272 
   $355,404   $315,883   $254,382 
Depreciation               
    Firearms  $32,010   $32,409   $33,594 
    Castings   2,688    3,029    2,321 
   $34,698   $35,438   $35,915 
Capital Expenditures               
    Firearms  $33,455   $26,246   $39,511 
    Castings   1,760    2,459    6,060 
   $35,215   $28,705   $45,571 

 

In 2016, the Company’s largest customers and the percent of total sales they represented were as follows: Davidson’s-19%; Lipsey’s-17%; Jerry’s/Ellett Brothers-15%; and Sports South-14%.

 

67 

Table of Contents 

In 2015, the Company’s largest customers and the percent of total sales they represented were as follows: Davidson’s-18%; Lipsey’s-17%; Sports South-13%; and Jerry’s/Ellett Brothers-11%.

 

In 2014, the Company’s largest customers and the percent of total sales they represented were as follows: Davidson’s-19%; Lipsey’s-13%; Sports South-13%; and Jerry’s/Ellett Brothers-12%.

 

The Company’s assets are located entirely in the United States and domestic sales represented at least 96% of total sales in 2016, 2015, and 2014.

 

15.   Quarterly Results of Operations (Unaudited)

 

The following is a tabulation of the unaudited quarterly results of operations for the two years ended December 31, 2016:

 

   Three Months Ended 
   4/2/16   7/2/16   10/1/16   12/31/16 
Net Sales  $173,109   $167,944   $161,427   $161,848 
Gross profit   59,113    56,694    50,251    53,496 
Net income   23,278    23,515    19,850    20,829 
Basic earnings per share   1.23    1.24    1.05    1.11 
Diluted earnings per share  $1.21   $1.22   $1.03   $1.10 

 

 

   Three Months Ended 
   3/28/15   6/27/15   9/26/15   12/31/15 
Net Sales  $136,954   $140,872   $120,871   $152,397 
Gross profit   41,397    48,508    34,011    48,244 
Net income   15,503    17,560    11,963    17,100 
Basic earnings per share   0.83    0.94    0.64    0.91 
Diluted earnings per share  $0.81   $0.91   $0.62   $0.88 

 

16.   Related Party Transactions

 

The Company contracts with the National Rifle Association (“NRA”) for some of its promotional and advertising activities, primarily the 2016 “Ruger $5 Million Match Campaign” and the 2015-16 “2.5 Million Gun Challenge”. The Company paid the NRA $8.4 million and $1.6 million in 2016 and 2015, respectively. Payments to the NRA were insignificant in 2014. One of the Company’s Directors also serves as a Director on the Board of the NRA.

 

17. Contingent Liabilities

 

As of December 31, 2016, the Company was a defendant in five (5) lawsuits and is aware of certain other such claims. The lawsuits fall into three categories: traditional product liability litigation, patent litigation and municipal litigation, discussed in turn below.

 

68 

Table of Contents 

Traditional Product Liability Litigation

 

Three of the five lawsuits mentioned above involve claims for damages related to allegedly defective products due to their design and/or manufacture. The lawsuits stem from specific incidents of personal injury and are based on traditional product liability theories such as strict liability, negligence and/or breach of warranty.

 

The Company management believes the allegations in these cases are unfounded, that the incidents are unrelated to the design or manufacture of the firearms, and that there should be no recovery against the Company.

 

Patent Litigation

 

Davies Innovations, Inc. v. Sturm, Ruger & Company, Inc. is a patent litigation suit originally filed in the United States District Court for the Southern District of Texas, Galveston Division. The case subsequently was transferred to the United States District Court for the Northern District of New Hampshire. The suit is based upon alleged patent infringement as the plaintiff claims that certain features of the Ruger SR-556 and SR-762 modern sporting rifles infringe its patent. The complaint seeks a judgment of infringement and unspecified monetary damages including costs, fees and treble damages.

 

The Company management believes the allegations in this case are unfounded, that there is no infringement of plaintiff’s patent, that plaintiff’s patent is invalid, and that there should be no recovery against the Company. The Company filed a Motion for Summary Judgment which was heard on December 6, 2016.

 

Municipal Litigation

Municipal litigation generally includes those cases brought by cities or other governmental entities against firearms manufacturers, distributors and retailers seeking to recover damages allegedly arising out of the misuse of firearms by third-parties.

There is only one remaining lawsuit of this type, filed by the City of Gary in Indiana State Court, over seventeen years ago. The complaint in that case seeks damages, among other things, for the costs of medical care, police and emergency services, public health services, and other services as well as punitive damages. In addition, nuisance abatement and/or injunctive relief is sought to change the design, manufacture, marketing and distribution practices of the various defendants. The suit alleges, among other claims, negligence in the design of products, public nuisance, negligent distribution and marketing, negligence per se and deceptive advertising. The case does not allege a specific injury to a specific individual as a result of the misuse or use of any of the Company's products.

After a long procedural history, the case was scheduled for trial on June 15, 2009. The case was not tried on that date and was largely dormant until a status conference was held on July 27, 2015. At that time, the court entered a scheduling order setting deadlines for plaintiff to file

69 

Table of Contents 

a Second Amended Complaint, for defendants to answer, and for defendants to file dispositive motions. The plaintiff did not file a Second Amended Complaint by the deadline.

Last year, Indiana passed a new law, Indiana Code § 34-12-3-1, which applies to the City's case. The defendants filed a joint motion for judgment on the pleadings, asserting immunity under §34-12-3-1 and asking the court to re-visit the Court of Appeals' earlier decision holding the Protection of Lawful Commerce in Arms Act inapplicable to the City's claims.

 

The United States and the Indiana Attorney General filed motions and briefs in intervention in defense of the constitutionality of the PLCAA and the Indiana Immunity Statute, respectively. A hearing on the motions to intervene was set for October 12, 2016.

 

The court subsequently granted the Joint Motion to Stay Resolution of Manufacturers’ Motion for Judgment on the Pleadings for six months or until the KS&E Sports v. Runnels case is decided by the Indiana Supreme Court, whichever is earlier. The court also vacated the October 12th hearing on motions to intervene by the United Sates and the Indiana Attorney General, given the City’s consent to the motions.

Summary of Claimed Damages and Explanation of Product Liability Accruals

 

Punitive damages, as well as compensatory damages, are demanded in certain of the lawsuits and claims. In many instances, the plaintiff does not seek a specified amount of money, though aggregate amounts ultimately sought may exceed product liability accruals and applicable insurance coverage. For product liability claims made after July 10, 2000, coverage is provided on an annual basis for losses exceeding $5 million per claim, or an aggregate maximum loss of $10 million annually, except for certain new claims which might be brought by governments or municipalities after July 10, 2000, which are excluded from coverage.

 

The Company management monitors the status of known claims and the product liability accrual, which includes amounts for asserted and unasserted claims. While it is not possible to forecast the outcome of litigation or the timing of costs, in the opinion of management, after consultation with special and corporate counsel, it is not probable and is unlikely that litigation, including punitive damage claims, will have a material adverse effect on the financial position of the Company, but may have a material impact on the Company’s financial results for a particular period.

 

Product liability claim payments are made when appropriate if, as, and when claimants and the Company reach agreement upon an amount to finally resolve all claims. Legal costs are paid as the lawsuits and claims develop, the timing of which may vary greatly from case to case. A time schedule cannot be determined in advance with any reliability concerning when payments will be made in any given case.

 

Provision is made for product liability claims based upon many factors related to the severity of the alleged injury and potential liability exposure, based upon prior claim experience. Because the Company’s experience in defending these lawsuits and claims is that unfavorable outcomes are typically not probable or estimable, only in rare cases is an accrual established for such costs.

70 

Table of Contents 

In most cases, an accrual is established only for estimated legal defense costs. Product liability accruals are periodically reviewed to reflect then-current estimates of possible liabilities and expenses incurred to date and reasonably anticipated in the future. Threatened product liability claims are reflected in the Company’s product liability accrual on the same basis as actual claims; i.e., an accrual is made for reasonably anticipated possible liability and claims-handling expenses on an ongoing basis.

 

A range of reasonably possible losses relating to unfavorable outcomes cannot be made. However, in product liability cases in which a dollar amount of damages is claimed, the amount of damages claimed, which totaled $0.1 million and $0.1 million at December 31, 2016 and 2015, respectively, are set forth as an indication of possible maximum liability the Company might be required to incur in these cases (regardless of the likelihood or reasonable probability of any or all of this amount being awarded to claimants) as a result of adverse judgments that are sustained on appeal.

 

As of December 31, 2016 and 2015, the Company was a defendant in 5 and 3 lawsuits, respectively, involving its products and is aware of other such claims. During 2016 and 2015, respectively, 3 and 2 claims were filed against the Company, 1 and 1 claims were settled, and no claims were dismissed either year.

 

The Company’s product liability expense was $2.1 million in 2016, $0.9 million in 2015, and $0.8 million in 2014. This expense includes the cost of outside legal fees, insurance, and other expenses incurred in the management and defense of product liability matters.

 

A roll-forward of the product liability reserve and detail of product liability expense for the three years ended December 31, 2016 follows:

 

Balance Sheet Roll-forward for Product Liability Reserve

 

           Cash Payments     
   Balance
Beginning
of Year (a)
   Accrued
Legal
Expense
(Income)
(b)
   Legal Fees
(c)
   Settlements
(d)
   Balance
End of
Year (a)
 
                     
2014  $1,236    (295)   (18)   (78)  $845 
                          
2015  $845    (77)   (18)   (6)  $744 
                          
2016  $744    1,221    (133)   (13)  $1,819 

 

71 

Table of Contents 

Income Statement Detail for Product Liability Expense

 

   Accrued
Legal
Expense
(b)
   Insurance
Premium
Expense
(e)
   Total
Product
Liability
Expense
 
             
2014  $(295)   1,069   $774 
                
2015  $(77)   997   $920 
                
2016  $1,221    834   $2,055 

 

Notes

 

(a)The beginning and ending liability balances represent accrued legal fees only. Settlements and administrative costs are expensed as incurred. Only in rare instances is an accrual established for settlements.

 

(b)The expense accrued in the liability is for legal fees only. In 2014 and 2015, the costs incurred related to cases that were settled or dismissed were less than the amounts accrued for these cases in prior years.

 

(c) Legal fees represent payments to outside counsel related to product liability matters.

 

(d)Settlements represent payments made to plaintiffs or allegedly injured parties in exchange for a full and complete release of liability.

 

(e)  Insurance expense represents the cost of insurance premiums.

 

There were no insurance recoveries during any of the above years.

 

18.Financial Instruments

The Company does not hold or issue financial instruments for trading or hedging purposes, nor does it hold interest rate, leveraged, or other types of derivative financial instruments. Fair values of accounts receivable, accounts payable, accrued expenses and income taxes payable reflected in the December 31, 2016 and 2015 balance sheets approximate carrying values at those dates.

 

19.Subsequent Events

 

On February 17, 2017, the Company’s Board of Directors authorized a dividend of 44¢ per share to shareholders of record on March 17, 2017.

 

From January 1, 2017 through February 17, 2017, the Company repurchased 633,600 shares of its common stock for $31.5 million in the open market. The average price per share purchased

72 

Table of Contents 

was $49.67. These purchases were funded with cash on hand. At February 17, 2017, $27.5 million remained authorized for future share repurchases.

 

The Company’s management has evaluated transactions occurring subsequent to December 31, 2016 and determined that there were no events or transactions during that period that would have a material impact on the Company’s results of operations or financial position.

73 

Table of Contents 
ITEM 9— CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

 

None.

 

ITEM 9A— CONTROLS AND PROCEDURES

 

Evaluation of Disclosure Controls and Procedures

 

The Company conducted an evaluation, with the participation of its Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of the Company’s disclosure controls and procedures, as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended, as of December 31, 2016. Based upon that evaluation, the Chief Executive Officer and Chief Financial Officer have concluded that as of December 31, 2016, the Company’s disclosure controls and procedures over financial reporting were effective.

 

Management’s Report on Internal Control over Financial Reporting

 

The Company’s management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rules 13a-15(f) and 15d-15(f) under the Securities Exchange Act of 1934. Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

The Company conducted an evaluation, with the participation of its Chief Executive Officer and Chief Financial Officer, of the effectiveness of its internal control over financial reporting as of December 31, 2016. This evaluation was performed based on the criteria established in “Internal Control — Integrated Framework” issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”) in 2013.

 

Management has concluded that the Company maintained effective internal control over financial reporting as of December 31, 2016, based on criteria established in “Internal Control — Integrated Framework” issued by the COSO in 2013.

 

The effectiveness of the Company’s internal control over financial reporting as of December 31, 2016 has been audited by RSM US LLP, an independent registered public accounting firm, as stated in their report which is included in this Form 10-K.

 

Changes in Internal Control over Financial Reporting

 

There were no changes in our internal control over financial reporting that occurred during our most recently completed fiscal quarter that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

74 

Table of Contents 

New York Stock Exchange Certification

Pursuant to Section 303A.12(a) of the New York Stock Exchange Listed Company Manual, the Company submitted an unqualified certification of our Chief Executive Officer to the New York Stock Exchange in 2016. The Company has also filed, as exhibits to this Annual Report on Form 10-K, the Chief Executive Officer and Chief Financial Officer Certifications required under the Sarbanes-Oxley Act of 2002.

 

 

ITEM 9B— OTHER INFORMATION

 

None.

 

PART III

 

 

ITEM 10— DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

 

 

Information concerning the Company’s directors, including the Company’s separately designated standing audit committee, and on the Company’s code of business conduct and ethics required by this Item is incorporated by reference from the Company’s Proxy Statement relating to the 2017 Annual Meeting of Stockholders scheduled to be held May 9, 2017, which will be filed with the SEC in March 2017.

 

Information concerning the Company’s executive officers required by this Item is set forth in Item 1 of this Annual Report on Form 10-K under the caption “Executive Officers of the Company.”

 

Information concerning beneficial ownership reporting compliance required by this Item is incorporated by reference from the Company’s Proxy Statement relating to the 2017 Annual Meeting of Stockholders scheduled to be held May 9, 2017, which will be filed with the SEC in March 2017.

 

 

ITEM 11— EXECUTIVE COMPENSATION

 

Information concerning director and executive compensation required by this Item is incorporated by reference from the Company’s Proxy Statement relating to the 2017 Annual Meeting of Stockholders scheduled to be held May 9, 2017, which will be filed with the SEC in March 2017.

 

 

ITEM 12— SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

 

Information concerning the security ownership of certain beneficial owners and management and related stockholder matters required by this Item is incorporated by reference from the Company’s Proxy Statement relating to the 2017 Annual Meeting of Stockholders scheduled to be held May 9, 2017, which will be filed with the SEC in March 2017.

75 

Table of Contents 

ITEM 13— CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS AND DIRECTOR INDEPENDENCE

 

Information concerning certain relationships and related transactions required by this Item is incorporated by reference from the Company’s Proxy Statement relating to the 2017 Annual Meeting of Stockholders scheduled to be held May 9, 2017.

 

 

ITEM 14— PRINCIPAL ACCOUNTANT FEES AND SERVICES

 

Information concerning the Company’s principal accountant fees and services and the pre-approval policies and procedures of the audit committee of the board of directors required by this Item is incorporated by reference from the Company’s Proxy Statement relating to the 2017 Annual Meeting of Stockholders scheduled to be held May 9, 2017, which will be filed with the SEC in March 2017.

 

 

 

 

76 

Table of Contents 

 

PART IV

 

 

ITEM 15—EXHIBITS AND FINANCIAL STATEMENT SCHEDULES

 

(a)Exhibits and Financial Statement Schedules

 

(1)Financial Statements can be found under Item 8 of Part II of this Form 10-K

 

 

(2)Schedules can be found on Page 86 of this Form 10-K

 

 

(3)Listing of Exhibits:

 

  Exhibit 3.1 Certificate of Incorporation of the Company, as amended (Incorporated by reference to Exhibits 4.1 and 4.2 to the Form S-3 Registration Statement previously filed by the Company File No. 33-62702).  
       
  Exhibit 3.2 Bylaws of the Company, as amended.  
       
  Exhibit 3.3 Amended and restated Article 3, Section 2 of Bylaws (Incorporated by reference to Exhibit 3.1 to the Company’s Current Report on Form 8-K filed with the SEC on April 24, 2007).  
       
  Exhibit 3.4 Amended and restated Article 3, Section 4 and Article 4, Section 5 of Bylaws (Incorporated by reference to Exhibit 3.1 to the Company’s Current Report on Form 8-K filed with the SEC on April 24, 2007).  
       
  Exhibit 3.5 Amended and restated Bylaws (Incorporated by reference to Exhibit 3.1 to the Company’s Current Report on Form 8-K filed with the SEC on July 26, 2007).  
       
  Exhibit 3.6 Amended and restated Bylaws (Incorporated by reference to Exhibit 3.1 to the Company’s Current Report on Form 8-K filed with the SEC on April 25, 2008).  
       
  Exhibit 3.7 Amendment to Article 5, Section 1 of Bylaws (Incorporated by reference to Exhibit 3.1 to the Company’s Current Report on Form 8-K filed with the SEC on February 6, 2009).  
       
  Exhibit 10.1 Sturm, Ruger & Company, Inc. Supplemental Executive Profit Sharing Retirement Plan (Incorporated by reference to Exhibit 10.4 to the Company’s Annual Report on Form 10-K for the year ended December 31, 1991, SEC File No. 1-10435).  

77 

Table of Contents 

 

       
  Exhibit 10.2 Agreement and Assignment of Lease dated September 30, 1987 by and between Emerson Electric Co. and Sturm, Ruger & Company, Inc. (Incorporated by reference to Exhibit 10.2 to the Company’s Annual Report on Form 10-K for the year ended December 31, 1991, SEC File No. 1-10435).  
       
  Exhibit 10.3 Sturm, Ruger & Company, Inc. Supplemental Executive Retirement Plan (Incorporated by reference to Exhibit 10.5 to the Company’s Annual Report on Form 10-K for the year ended December 31, 1995, SEC File No. 1-10435).  
       
  Exhibit 10.4 [Intentionally omitted.]  

 

  Exhibit 10.5 Agreement and Release, dated as of February 28, 2006, by and between Sturm, Ruger & Company, Inc. and William B. Ruger (Incorporated by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K filed with the SEC on April 4, 2006, SEC File No. 1-10435).  
       
  Exhibit 10.6 Sale and Purchase Agreement, dated as of September 26, 2006, by and between Sturm, Ruger & Company, Inc. and Ruger Business Holdings, L.P. (Incorporated by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K filed with the SEC on September 26, 2006, SEC File No. 1-10435).  
       
  Exhibit 10.7 Credit Agreement, dated as of December 14, 2007, by and between the Company and Bank of America (Incorporated by reference to Exhibit 10.18 to the Company's Current Report on Form 8-K filed with the SEC on December 20, 2007).  
       
  Exhibit 10.8 Severance Agreement, dated as of April 10, 2008, by and between the Company and Michael O. Fifer (Incorporated by reference to Exhibit 10.1 to the Company's Current Report on Form 8-K filed with the SEC on April 11, 2008).  
       
  Exhibit 10.9 Severance Agreement, dated as of April 10, 2008, by and between the Company and Thomas A. Dineen (Incorporated by reference to Exhibit 10.2 to the Company's Current Report on Form 8-K filed with the SEC on April 11, 2008).  
       
  Exhibit 10.10 Severance Agreement, dated as of April 10, 2008, by and between the Company and Mark T. Lang (Incorporated by reference to Exhibit 10.3 to the Company's Current Report on Form 8-K filed with the SEC on April 11, 2008).  
       
  Exhibit 10.11 Severance Agreement, dated as of April 10, 2008, by and between the Company and  Christopher J. Killoy (Incorporated by reference to Exhibit 10.4 to the Company's Current Report on Form 8-K filed with the SEC on April 11, 2008).  

78 

Table of Contents 

 

  Exhibit 10.12 Severance Agreement, dated as of April 10, 2008, by and between the Company and Steven M. Maynard (Incorporated by reference to Exhibit 10.5 to the Company's Current Report on Form 8-K filed with the SEC on April 11, 2008).  
       
  Exhibit 10.13 Severance Agreement, dated as of April 10, 2008, by and between the Company and Thomas P. Sullivan (Incorporated by reference to Exhibit 10.6 to the Company's Current Report on Form 8-K filed with the SEC on April 11, 2008).  
       
  Exhibit 10.14 Severance Agreement, dated as of May 2, 2008 by and between the Company and Kevin B. Reid, Sr. (Incorporated by reference to Exhibit 10.1 to the Company's Current Report on Form 8-K filed with the SEC on May 5, 2008).  
       
  Exhibit 10.15 First Amendment to Credit Agreement, dated as of December 15, 2008, by and between the Company and Bank of America (Incorporated by reference to Exhibit 99.1 to the Company's Current Report on Form 8-K filed with the SEC on December 22, 2008).  
       
  Exhibit 10.16 Second Amendment to Credit Agreement, dated December 11, 2009, by and between the Company and Bank of America (Incorporated by reference to Exhibit 99.1 to the Company's Current Report on Form 8-K filed with the SEC on December 21, 2009).  
       
  Exhibit 10.17 Fifth Amendment to Credit Agreement, dated February 14, 2013 by and between the Company and Bank of America (Incorporated by reference to Exhibit 99.1 to the Company's Current Report on Form 8-K filed with the SEC on February 21, 2013).  
       
  Exhibit 10.18

Sixth Amendment to Credit Agreement, dated June 9, 2014, by and between the Company and Bank of America (Incorporated by reference to Exhibit 99.1 to the Company's Current Report on Form 8-K filed with the SEC on June 16, 2014).

 

 
  Exhibit 10.19 Seventh Amendment to Credit Agreement, dated June 5, 2015, by and between the Company and Bank of America (Incorporated by reference to Exhibit 99.1 to the Company's Current Report on Form 8-K filed with the SEC on June 12, 2015).  
       
  Exhibit 10.20 Eighth Amendment to Credit Agreement, dated June 6, 2016, by and between the Company and Bank of America (Incorporated by reference to Exhibit 99.1 to the Company's Current Report on Form 8-K filed with the SEC on June 8, 2016).  

 

79 

Table of Contents 

       
  Exhibit 10.21 Transition Services and Consulting Agreement, dated August 1, 2016, by and between the Company and Michael O. Fifer (Incorporated by reference to Exhibit 10.1 to the Company's Current Report on Form 8-K filed with the SEC on August 2, 2016).  
       
  Exhibit 10.22 Agreement, dated August 1, 2016, by and between the Company and Christopher J. Killoy (Incorporated by reference to Exhibit 10.2 to the Company's Current Report on Form 8-K filed with the SEC on August 2, 2016).  
       
  Exhibit 10.23 Executive Severance Agreement, dated August 1, 2016, by and between the Company and Shawn C. Leska (Incorporated by reference to Exhibit 10.3 to the Company's Current Report on Form 8-K filed with the SEC on August 2, 2016).  
       
  Exhibit 23.1 Consent of RSM US LLP  
       
  Exhibit 31.1 Certification of Chief Executive Officer Pursuant to Rule 13a-14(a) of the Exchange Act.  
       
  Exhibit 31.2 Certification of Treasurer and Chief Financial Officer Pursuant to Rule 13a-14(a) of the Exchange Act.  

 

  Exhibit 32.1 Certification of the Chief Executive Officer Pursuant to Rule 13a-14(b) of the Exchange Act and 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.  

 

  Exhibit 32.2 Certification of the Treasurer and Chief Financial Officer Pursuant to Rule 13a-14(b) of the Exchange Act and 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.  

 

  Exhibit 99.1 Item 1 LEGAL PROCEEDINGS from the Quarterly Report on Form 10-Q of the Company for the quarter ended September 30, 1999, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS.  
       
  Exhibit 99.2 Item 1 LEGAL PROCEEDINGS from the Quarterly Report on Form 10-Q of the Company for the quarter ended March 28, 2015, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS.  
       
  Exhibit 99.3 Item 1 LEGAL PROCEEDINGS from the Quarterly Report on Form 10-Q of the Company for the quarter ended September 26, 2015, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS.  

 

80 

Table of Contents 

 

SIGNATURES

 

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

  STURM, RUGER & COMPANY, INC.
  (Registrant)
   
   
  S/THOMAS A. DINEEN
  Thomas A. Dineen
  Principal Financial Officer
  Principal Accounting Officer, Vice President
  Treasurer and Chief Financial Officer
   
   
  February 22, 2017
  Date

 

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.

 

 

S/MICHAEL O. FIFER                               2/22/17

Michael O. Fifer

Chief Executive Officer, Director

(Principal Executive Officer)

 

 

S/JOHN A. COSENTINO, JR.                   2/22/17

John A. Cosentino, Jr.

Director

 

 

S/C. MICHAEL JACOBI                            2/22/17

C. Michael Jacobi

Director

 

S/RONALD C. WHITAKER                     2/22/17

Ronald C. Whitaker

Director

 

 

S/AMIR P. ROSENTHAL                          2/22/17

Amir P. Rosenthal

Director

 

 

S/PHILLIP C. WIDMAN                           2/22/17

Phillip C. Widman

Director

S/TERRENCE G. O’CONNOR                   2/22/17

Terrence G. O’Connor

Director

 

 

S/SANDRA S. FROMAN                          2/22/17

Sandra S. Froman

Director

 

S/CHRISTOPHER J. KILLOY                    2/22/17

Christopher J. Killoy

President, Chief Operating Officer, and Director

 

S/THOMAS A. DINEEN                           2/22/17

Thomas A Dineen

Principal Financial Officer

Principal Accounting Officer, Vice President

Treasurer and Chief Financial Officer

81 

Table of Contents 

EXHIBIT INDEX

 

 

    Page No.
Exhibit 3.1 Certificate of Incorporation of the Company, as amended (Incorporated by reference to Exhibits 4.1 and 4.2 to the Form S-3 Registration Statement previously filed by the Company File No. 33-62702).  
     
Exhibit 3.2 Bylaws of the Company, as amended.  
     
Exhibit 3.3 Amended and restated Article 3, Section 2 of Bylaws (Incorporated by reference to Exhibit 3.1 to the Company’s Current Report on Form 8-K filed with the SEC on April 24, 2007).  
     
Exhibit 3.4 Amended and restated Article 3, Section 4 and Article 4, Section 5 of Bylaws (Incorporated by reference to Exhibit 3.1 to the Company’s Current Report on Form 8-K filed with the SEC on April 24, 2007).  
     
Exhibit 3.5 Amended and restated Bylaws (Incorporated by reference to Exhibit 3.1 to the Company’s Current Report on Form 8-K filed with the SEC on July 26, 2007).  
     
Exhibit 3.6 Amended and restated Bylaws (Incorporated by reference to Exhibit 3.1 to the Company’s Current Report on Form 8-K filed with the SEC on April 25, 2008).  
     
Exhibit 3.7 Amendment to Article 5, Section 1 of Bylaws (Incorporated by reference to Exhibit 3.1 to the Company’s Current Report on Form 8-K filed with the SEC on February 6, 2009).  
     
     
Exhibit 10.1 Sturm, Ruger & Company, Inc. Supplemental Executive Profit Sharing Retirement Plan (Incorporated by reference to Exhibit 10.4 to the Company’s Annual Report on Form 10-K for the year ended December 31, 1991, SEC File No. 1-10435).  
     
Exhibit 10.2 Agreement and Assignment of Lease dated September 30, 1987 by and between Emerson Electric Co. and Sturm, Ruger & Company, Inc. (Incorporated by reference to Exhibit 10.2 to the Company’s Annual Report on Form 10-K for the year ended December 31, 1991, SEC File No. 1-10435).  
     
Exhibit 10.3 Sturm, Ruger & Company, Inc. Supplemental Executive Retirement Plan (Incorporated by reference to Exhibit 10.5 to the Company’s Annual Report on Form 10-K for the year ended December 31, 1995, SEC File No. 1-10435).  
     
Exhibit 10.4 [Intentionally omitted.]  

82 

Table of Contents 

EXHIBIT INDEX (continued)

 

Exhibit 10.5 Agreement and Release, dated as of February 28, 2006, by and between Sturm, Ruger & Company, Inc. and William B. Ruger (Incorporated by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K filed with the SEC on April 4, 2006, SEC File No. 1-10435).  
     
Exhibit 10.6 Sale and Purchase Agreement, dated as of September 26, 2006, by and between Sturm, Ruger & Company, Inc. and Ruger Business Holdings, L.P. (Incorporated by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K filed with the SEC on September 26, 2006, SEC File No. 1-10435).  
     
Exhibit 10.7 Credit Agreement, dated as of December 14, 2007, by and between the Company and Bank of America (Incorporated by reference to Exhibit 10.18 to the Company's Current Report on Form 8-K filed with the SEC on December 20, 2007).  
     
Exhibit 10.8 Severance Agreement, dated as of April 10, 2008, by and between the Company and Michael O. Fifer (Incorporated by reference to Exhibit 10.1 to the Company's Current Report on Form 8-K filed with the SEC on April 11, 2008).  
     
Exhibit 10.9 Severance Agreement, dated as of April 10, 2008, by and between the Company and Thomas A. Dineen (Incorporated by reference to Exhibit 10.2 to the Company's Current Report on Form 8-K filed with the SEC on April 11, 2008).  
     
Exhibit 10.10 Severance Agreement, dated as of April 10, 2008, by and between the Company and Mark T. Lang (Incorporated by reference to Exhibit 10.3 to the Company's Current Report on Form 8-K filed with the SEC on April 11, 2008).  
     
Exhibit 10.11 Severance Agreement, dated as of April 10, 2008, by and between the Company and  Christopher J. Killoy (Incorporated by reference to Exhibit 10.4 to the Company's Current Report on Form 8-K filed with the SEC on April 11, 2008).  
     
Exhibit 10.12 Severance Agreement, dated as of April 10, 2008, by and between the Company and Steven M. Maynard (Incorporated by reference to Exhibit 10.5 to the Company's Current Report on Form 8-K filed with the SEC on April 11, 2008).  
     
Exhibit 10.13 Severance Agreement, dated as of April 10, 2008, by and between the Company and Thomas P. Sullivan (Incorporated by reference to Exhibit 10.6 to the Company's Current Report on Form 8-K filed with the SEC on April 11, 2008).  
     
Exhibit 10.14 Severance Agreement, dated as of May 2, 2008 by and between the Company and Kevin B. Reid, Sr. (Incorporated by reference to Exhibit 10.1 to the Company's Current Report on Form 8-K filed with the SEC on May 5, 2008).  

83 

Table of Contents 

EXHIBIT INDEX (continued)

 

Exhibit 10.15 First Amendment to Credit Agreement, dated as of December 15, 2008, by and between the Company and Bank of America (Incorporated by reference to Exhibit 99.1 to the Company's Current Report on Form 8-K filed with the SEC on December 22, 2008).  
     
Exhibit 10.16 Second Amendment to Credit Agreement, dated December 11, 2009, by and between the Company and Bank of America (Incorporated by reference to Exhibit 99.1 to the Company's Current Report on Form 8-K filed with the SEC on December 21, 2009).  
     
Exhibit 10.17 Fifth Amendment to Credit Agreement, dated February 14, 2013 by and between the Company and Bank of America (Incorporated by reference to Exhibit 99.1 to the Company's Current Report on Form 8-K filed with the SEC on February 21, 2013).  
     
Exhibit 10.18 Sixth Amendment to Credit Agreement, dated June 9, 2014, by and between the Company and Bank of America (Incorporated by reference to Exhibit 99.1 to the Company's Current Report on Form 8-K filed with the SEC on June 16, 2014).  
     
Exhibit 10.19 Seventh Amendment to Credit Agreement, dated June 5, 2015, by and between the Company and Bank of America (Incorporated by reference to Exhibit 99.1 to the Company's Current Report on Form 8-K filed with the SEC on June 12, 2015).  
     
Exhibit 10.20 Eighth Amendment to Credit Agreement, dated June 6, 2016, by and between the Company and Bank of America (Incorporated by reference to Exhibit 99.1 to the Company's Current Report on Form 8-K filed with the SEC on June 8, 2016).  
     
Exhibit 10.21 Transition Services and Consulting Agreement, dated August 1, 2016, by and between the Company and Michael O. Fifer (Incorporated by reference to Exhibit 10.1 to the Company's Current Report on Form 8-K filed with the SEC on August 2, 2016).  
     
Exhibit 10.22 Agreement, dated August 1, 2016, by and between the Company and Christopher J. Killoy (Incorporated by reference to Exhibit 10.2 to the Company's Current Report on Form 8-K filed with the SEC on August 2, 2016).  
     
Exhibit 10.23 Executive Severance Agreement, dated August 1, 2016, by and between the Company and Shawn C. Leska (Incorporated by reference to Exhibit 10.3 to the Company's Current Report on Form 8-K filed with the SEC on August 2, 2016).  
     

 

84 

Table of Contents 

EXHIBIT INDEX (continued)

 

Exhibit 23.1 Consent of RSM US LLP 88
     
Exhibit 31.1 Certification of Chief Executive Officer Pursuant to Rule 13a-14(a) of the Exchange Act. 89
     
Exhibit 31.2 Certification of Treasurer and Chief Financial Officer Pursuant to Rule 13a-14(a) of the Exchange Act. 91
     
Exhibit 32.1 Certification of the Chief Executive Officer Pursuant to Rule 13a-14(b) of the Exchange Act and 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002. 93
     
Exhibit 32.2 Certification of the Treasurer and Chief Financial Officer Pursuant to Rule 13a-14(b) of the Exchange Act and 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002. 94
     
Exhibit 99.1 Item 1 LEGAL PROCEEDINGS from the Quarterly Report on Form 10-Q of the Company for the quarter ended September 30, 1999, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS.  
     
Exhibit 99.2 Item 1 LEGAL PROCEEDINGS from the Quarterly Report on Form 10-Q of the Company for the quarter ended March 28, 2015, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS.  
     
Exhibit 99.3 Item 1 LEGAL PROCEEDINGS from the Quarterly Report on Form 10-Q of the Company for the quarter ended September 26, 2015, SEC File No. 1-10435, incorporated by reference in Item 3 LEGAL PROCEEDINGS.  
     

 

85 

Table of Contents 

 

 

 

 

YEAR ENDED DECEMBER 31, 2016

STURM, RUGER & COMPANY, INC.



ITEMS 15(a)
FINANCIAL STATEMENT SCHEDULE

 

86 

Table of Contents 

 

Sturm, Ruger & Company, Inc.

 

Item 15(a)--Financial Statement Schedule

 

Schedule II—Valuation and Qualifying Accounts

 

(In Thousands)

 

 

COL. A  COL. B  COL. C  COL. D  COL. E
      ADDITIONS      
Description  Balance at
Beginning
of Period
  (1)
Charged
(Credited) to
Costs and
Expenses
  (2)
Charged to
Other
Accounts
–Describe
  Deductions  Balance
at End
of
Period
                
Deductions from asset accounts:                         
Allowance for doubtful accounts:                         
Year ended December 31, 2016  $400   $9        $9(a)  $400 
Year ended December 31, 2015  $400   $120        $120(a)  $400 
Year ended December 31, 2014  $300   $100             $400 
                          
Allowance for discounts:                         
Year ended December 31, 2016  $1,443   $14,835        $14,873(b)  $1,405 
Year ended December 31, 2015  $1,003   $11,797        $11,357(b)  $1,443 
Year ended December 31, 2014  $1,344   $11,485        $11,826(b)  $1,003 
                          
Excess and obsolete inventory reserve:                         
Year ended December 31, 2016  $2,118   $1,044        $822(c)  $2,340 
Year ended December 31, 2015  $3,750   $(1,468)       $164(c)  $2,118 
Year ended December 31, 2014  $2,422   $1,328             $3,750 
                          

 

(a)Accounts written off
(b)Discounts taken
(c)Inventory written off

 

87