Use these links to rapidly review the document
TABLE OF CONTENTS
ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
PART IV
INDEX TO FINANCIAL STATEMENT SCHEDULE

Table of Contents

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D. C. 20549

---

FORM 10-K

---

Commission file number 1-9576

OWENS-ILLINOIS, INC.
(Exact name of registrant as specified in its charter)

Registrant's telephone number, including area code: (567) 336-5000

          Securities registered pursuant to Section 12(b) of the Act:

          Securities registered pursuant to Section 12(g) of the Act: None

          Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ý    No o

          Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes o    No ý

          Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports) and (2) has been subject to such filing requirements for the past 90 days. Yes ý    No o

          Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ý    No o

          Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.    ý

          Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See definitions of "large accelerated filer," "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act.

          Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o    No ý

          The aggregate market value (based on the consolidated tape closing price on June 30, 2010) of the voting and non-voting stock beneficially held by non-affiliates of Owens-Illinois, Inc. was approximately $3,274,343,000. For the sole purpose of making this calculation, the term "non-affiliate" has been interpreted to exclude directors and executive officers of the Company. Such interpretation is not intended to be, and should not be construed to be, an admission by Owens-Illinois, Inc. or such directors or executive officers of the Company that such directors and executive officers of the Company are "affiliates" of Owens-Illinois, Inc., as that term is defined under the Securities Act of 1934.

          The number of shares of common stock, $.01 par value of Owens-Illinois, Inc. outstanding as of December 31, 2010 was 163,715,483.

DOCUMENTS INCORPORATED BY REFERENCE

          Portions of Owens-Illinois, Inc. Proxy Statement for The Annual Meeting of Share Owners To Be Held Thursday, May 5, 2011 ("Proxy Statement") are incorporated by reference into Part III hereof.

TABLE OF GUARANTORS

          The address, including zip code, and telephone number, of each additional registrant's principal executive office is One Michael Owens Way, Perrysburg, Ohio 43551; (567) 336-5000. These companies are listed as guarantors of the debt securities of the registrant. The consolidating condensed financial statements of the Company depicting separately its guarantor and non-guarantor subsidiaries are presented in the notes to the consolidated financial statements. All of the equity securities of each of the guarantors set forth in the table above are owned, either directly or indirectly, by Owens-Illinois, Inc.

---

Table of Contents

TABLE OF CONTENTS

---

Table of Contents

PART I

ITEM 1.    BUSINESS

General Development of Business

        Owens-Illinois, Inc. (the "Company"), through its subsidiaries, is the successor to a business established in 1903. The Company is the largest manufacturer of glass containers in the world, based on revenues, with leading positions in Europe, North America, South America and Asia Pacific.

Strategic Priorities and Competitive Strengths

        The Company is pursuing the following strategic priorities aimed at optimizing shareholder return:

•

Marketing Glass—drive growth with total packaging solutions and conversion to glass; partner with new and existing customers; and promote glass benefits to customers, retailers and others



•

Strategic & Profitable Growth—grow through acquisitions and joint ventures in targeted markets and build plants in rapidly growing markets



•

Innovation & Technology—invest in research and development focused on melting, forming and glass properties and focus on new products, new features and new processes



•

Operational Excellence—focus on safety first; establish quality leadership; pursue excellence in productivity, supply chain and processes; and develop employees

        Beginning in 2007, the Company commenced a strategic review of its global profitability and manufacturing footprint. Since undertaking this review, the Company has announced the curtailment of capacity or closing of facilities involving 26 furnaces and approximately 3,250 job eliminations. The Company concluded its global review as of December 31, 2009, with the final actions being implemented in the first half of 2010. The Company believes these actions will contribute to optimizing shareholder return. On an ongoing basis, the Company will review its manufacturing operations, and it is possible that it will close selected facilities or production lines in the future.

Technology Leader

        The Company believes it is a technological leader in the worldwide glass container segment of the rigid packaging market in which it competes. During the five years ended December 31, 2010, on a continuing operations basis, the Company invested more than $1.7 billion in capital expenditures (excluding acquisitions) and more than $300 million in research, development and engineering to, among other things, improve labor and machine productivity, increase capacity in growing markets and commercialize technology into new products.

Worldwide Corporate Headquarters

        The principal executive office of the Company is located at One Michael Owens Way, Perrysburg, Ohio 43551; the telephone number is (567) 336-5000. The Company's website is www.o-i.com. The Company's annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934 can be obtained from this site at no cost. The Company's Corporate Governance Guidelines, Code of Business Conduct and Ethics and the charters of the Compensation, Nominating/Corporate Governance and Audit Committees are also available on the Investor Relations section of the Company's web site. Copies of these documents are available in print to share owners upon request, addressed to the Corporate Secretary at the address above.

1

---

Table of Contents

Financial Information about Reportable Segments

        Information as to sales, earnings from continuing operations before interest income, interest expense, and provision for income taxes and excluding amounts related to certain items that management considers not representative of ongoing operations ("Segment Operating Profit"), and total assets by reportable segment is included in Note 19 to the Consolidated Financial Statements.

Narrative Description of Business

        Below is a description of the business and information to the extent material to understanding the Company's business taken as a whole.

        The Company is the largest manufacturer of glass containers in the world with 81 glass manufacturing plants in 21 countries. The Company is the leading glass container manufacturer in most of the countries where it competes in the glass container segment of the rigid packaging market, including the U.S.

Products and Services

        The Company produces glass containers for beer, ready-to-drink low alcohol refreshers, spirits, wine, food, tea, juice and pharmaceuticals. The Company also produces glass containers for soft drinks and other non-alcoholic beverages, including returnable/refillable glass containers, principally outside the U.S. The Company manufactures these products in a wide range of sizes, shapes and colors. The Company is active in new product development and glass container innovation.

Customers

        In most of the countries where the Company competes, it has the leading position in the glass container segment of the rigid packaging market based on sales revenue. The largest customers include many of the leading manufacturers and marketers of glass packaged products in the world. In the U.S., the majority of the Company's customers for glass containers are brewers, wine vintners, distillers and food producers. The Company also produces glass containers for soft drinks and other non-alcoholic beverages, principally outside the U.S. The largest U.S. glass container customers include (in alphabetical order) Anheuser-Busch InBev, Brown Forman, Constellation, Diageo, H.J. Heinz, MillerCoors, PepsiCo, Saxco International, and Yuengling. The largest glass container customers outside the U.S. include (in alphabetical order) Anheuser-Busch InBev, Diageo, Foster's, Heineken, Lion Nathan, Molson/Coors, Nestle, Pernod Ricard, and SABMiller. The Company is a significant supplier of glass containers to all of these customers.

        The Company sells most of its glass container products directly to customers under annual or multi-year supply agreements. Multi-year contracts typically provide for price adjustments based on cost changes. The Company also sells some of its products through distributors. Glass container production is typically scheduled to maintain reasonable levels of inventory.

Markets and Competitive Conditions

        The Company's principal markets for glass container products are in Europe, North America, South America and Asia Pacific. The Company believes it is a low-cost producer in the glass container segment of the rigid packaging market in many of the countries in which it competes. Much of this cost advantage is due to the Company's manufacturing know-how and process technology. The Company's machine development activities and systematic upgrading of production equipment support its low-cost leadership position in the glass container segment in many of the countries in which it competes, a key strength to competing successfully in the rigid packaging market.

2

---

Table of Contents

        Europe.    The Company has the leading share of the glass container segment of the rigid packaging market in Europe, with 36 glass container manufacturing plants located in the Czech Republic, Estonia, France, Germany, Hungary, Italy, The Netherlands, Poland, Spain and the United Kingdom. These plants primarily produce glass containers for the beer, wine, champagne, spirits and food markets in these countries. The Company is also involved in a joint-venture glass manufacturer in Italy. The Company competes directly with Verallia, a subsidiary of Compagnie de Saint-Gobain, throughout Europe, Ardagh plc in the U.K., Germany and Poland, and Vetropak in the Czech Republic. In other locations in Europe, the Company competes indirectly with a variety of glass container firms including Verallia, Vetropak and Ardagh plc.

        North America.    The Company has 19 glass container manufacturing plants in the U.S. and Canada, and is also involved in a joint venture that manufactures glass containers in the U.S. The Company has the leading share of the glass container segment of the U.S. rigid packaging market, based on sales revenue by domestic producers. The principal glass container competitors in the U.S. are Verallia North America (a brand of Saint-Gobain Containers, Inc., a wholly-owned subsidiary of Compagnie de Saint-Gobain) and Anchor Glass Container Corporation. In addition, imports from Mexico and other countries compete in U.S. glass container segments. Additionally, a few major consumer packaged goods companies self-manufacture glass containers.

        South America.    The Company has 13 glass manufacturing plants in South America, located in Argentina, Brazil, Colombia, Ecuador and Peru. In South America, the Company maintains a diversified portfolio serving several markets, including beer, non-alcoholic beverages, spirits, ready-to-drink beverages, wine, food and pharmaceuticals. The region also has a large infrastructure for returnable/refillable glass containers, which has been further developed in recent years with expansions in new filling lines by many of the Company's customers. The Company competes directly with Verallia, a subsidiary of Compagnie de Saint-Gobain, in Brazil and Argentina, and does not believe that it competes with any other large, multi-national glass container manufacturers in the rest of the region.

        Until recently, the Company's South American operations included two production facilities in Venezuela. These operations were expropriated by the Venezuelan government during the fourth quarter of 2010. For further information, see Management's Discussion and Analysis of Financial Condition and Results of Operations and Note 23 to the Consolidated Financial Statements.

        Asia Pacific.    The Company has 13 glass container manufacturing plants in the Asia Pacific region, located in Australia, New Zealand, Indonesia and China. It is also involved in joint venture operations in China, Malaysia and Vietnam. The Company primarily produces glass containers for the beer, wine, food and non-alcoholic beverage markets in the Asia Pacific region. The Company competes directly with Amcor Limited in Australia, and does not believe that it competes with any other large, multi-national glass container manufacturers in the rest of the region. In China, the glass container segments of the packaging market are regional and highly fragmented with a large number of local competitors.

        In addition to competing with other large and well-established manufacturers in the glass container segment, the Company competes in all regions with manufacturers of other forms of rigid packaging, principally aluminum cans and plastic containers, on the basis of quality, price, service and the marketing attributes of the container. The principal competitors producing metal containers include Amcor, Ball Corporation, Crown Holdings, Inc., Rexam plc, and Silgan Holdings Inc. The principal competitors producing plastic containers include Consolidated Container Holdings, LLC, Graham Packaging Company, Plastipak Packaging, Inc. and Silgan Holdings Inc. The Company also competes with manufacturers of non-rigid packaging alternatives, including flexible pouches, aseptic cartons and bag-in-box containers.

        The Company continues to focus on serving the needs of leading multi-national consumer companies as they pursue international growth opportunities. The Company believes that it is often the

3

---

Table of Contents

glass container partner of choice for such multi-national consumer companies due to the Company's leadership in glass manufacturing know-how and process technology and its status as a high quality producer.

Manufacturing

        The Company believes it is a low-cost producer in the glass container segment of the rigid packaging market in many of the countries in which it competes. Much of this cost advantage is due to the Company's manufacturing know-how and process technology. The Company's machine development activities and systematic upgrading of production equipment have given it a low-cost leadership position in the glass container segment in most of the countries in which it competes, a key strength to competing successfully in the rigid packaging market. The Company uses its 81-plant footprint to benchmark its manufacturing operations and to share best practices.

        The Company operates several machine shops that assemble and repair high-productivity glass-forming machines as well as mold shops that manufacture molds and related equipment. The Company also provides engineering support for its glass manufacturing operations through facilities located in the U.S., Australia, Poland and Peru.

Methods of Distribution

        Due to the significance of transportation costs and the importance of timely delivery, glass container manufacturing facilities are generally located close to customers. In the U.S., most of the Company's glass container products are shipped by common carrier to customers within a 250-mile radius of a given production site. In addition, the Company's glass container operations outside the U.S. export some products to customers beyond their national boundaries, which may include transportation by rail and ocean delivery in combination with common carriers.

Suppliers and Raw Materials

        The primary raw materials used in the Company's glass container operations are sand, soda ash, limestone and recycled glass. Each of these materials, as well as the other raw materials used to manufacture glass containers, has historically been available in adequate supply from multiple sources. One of the sources is a soda ash mining operation in Wyoming in which the Company has a 25% interest.

Energy

        The Company's glass container operations require a continuous supply of significant amounts of energy, principally natural gas, fuel oil, and electrical power. Adequate supplies of energy are generally available to the Company at all of its manufacturing locations. Energy costs typically account for 15-25% of the Company's total manufacturing costs, depending on the cost of energy, the factory location, and its particular energy requirements. The percentage of total cost related to energy can vary significantly because of volatility in market prices, particularly for natural gas and fuel oil in volatile markets such as North America and Europe. In North America, approximately 85% of the sales volume is tied to customer contracts that contain provisions that pass the price of natural gas to the customer, effectively reducing the North America segment's exposure to changing market prices. In Europe, the Company enters into fixed price contracts for much of its energy requirements. These contracts typically have terms of 12 months or less. Also, in order to limit the effects of fluctuations in market prices for natural gas, the Company uses commodity futures contracts related to its forecasted requirements in North America. The objective of these futures contracts is to reduce the potential volatility in cash flows and expense due to changing market prices. The Company continually evaluates the energy markets with respect to its forecasted energy requirements in order to optimize its use of commodity futures contracts.

4

---

Table of Contents

Glass Recycling

        The Company is an important contributor to the recycling effort in the U.S. and abroad and continues to melt substantial recycled glass tonnage in its glass furnaces. The Company is among the largest users of recycled glass containers. If sufficient high-quality recycled glass were available on a consistent basis, the Company has the technology to operate using up to 90% recycled glass. Using recycled glass in the manufacturing process reduces energy costs and prolongs the operating life of the glass melting furnaces.

Technical Assistance License Agreements

        The Company has agreements to license its proprietary glass container technology and provide technical assistance to 21 companies in 20 countries. These agreements cover areas related to manufacturing and engineering assistance. The worldwide licensee network provides a stream of revenue to help support the Company's development activities and gives it the opportunity to participate in the rigid packaging market in countries where it does not already have a direct presence. In addition, the Company's technical agreements enable it to apply certain "best practices" developed by its worldwide licensee network. In the years 2010, 2009 and 2008, the Company earned $16 million, $13 million and $18 million, respectively, in royalties and net technical assistance revenue on a continuing operations basis.

Research and Development

        The Company believes it is a technological leader in the worldwide glass container segment of the rigid packaging market. Research, development, and engineering constitute important parts of the Company's technical activities. On a continuing operations basis, research, development, and engineering expenditures were $62 million, $58 million, and $66 million for 2010, 2009, and 2008, respectively. The Company's research, development and engineering activities include new products, manufacturing process control, melting technology, automatic inspection and further automation of manufacturing activities. The Company's research and development activities are conducted at its corporate facilities in Perrysburg, Ohio.

Environmental and Other Governmental Regulation

        The Company's worldwide operations, in common with those of the industry generally, are subject to extensive laws, ordinances, regulations and other legal requirements relating to environmental protection, including legal requirements governing investigation and clean-up of contaminated properties as well as water discharges, air emissions, waste management and workplace health and safety.

Recycling and Bottle Deposits

        In the U.S., Canada, Europe and elsewhere, a number of government authorities have adopted or are considering legal requirements that would mandate certain rates of recycling, the use of recycled materials, or limitations on or preferences for certain types of packaging. The Company believes that governments worldwide will continue to develop and enact legal requirements seeking to, or having the effect of, guiding customer and end-consumer packaging choices.

        In North America, sales of beverage containers are affected by governmental regulation of packaging, including deposit return laws. As of December 31, 2010, there were 11 U.S. states with bottle deposit laws in effect, requiring consumer deposits of between 2 and 15 cents (USD), depending on the size of the container. In Canada, there are 10 provinces and 2 territories with consumer deposits between 5 and 25 cents (Canadian), depending on the size of the container. In Europe a number of countries have some form of consumer deposit law in effect, including Austria, Belgium, Denmark,

5

---

Table of Contents

Finland, Germany, The Netherlands, Norway, Sweden and Switzerland. The structure and enforcement of such laws and regulations can impact the sales of beverage containers in a given jurisdiction. Such laws and regulations also impact the availability of post-consumer recycled glass for the Company to use in container production.

        A number of U.S. states and Canadian provinces have recently considered or are now considering laws and regulations to encourage curbside, deposit return, and on-premise recycling. Although there is no clear trend in the direction of these state and provincial laws and regulations, the Company believes that U.S. states and Canadian provinces, as well as municipalities within those jurisdictions, will continue to adopt recycling laws which will affect supplies of post-consumer recycled glass. As a large user of post-consumer recycled glass for bottle-to-bottle production, the Company has an interest in laws and regulations impacting supplies of such material in its markets.

Air Emissions

        The European Union Emissions Trading Scheme ("EUETS") commenced January 1, 2005. The EU has committed to Kyoto Protocol emissions reduction targets and the EUETS is intended to facilitate such reduction. The Company's manufacturing installations which operate in EU countries must restrict the volume of their CO2 emissions to the level of their individually allocated Emissions Allowances as set by country regulators. If the actual level of emissions for any installation exceeds its allocated allowance, additional allowances can be bought on the market to cover deficits; conversely, if the actual level of emissions for such installation is less than its allocation, the excess allowances can be sold on the same market. The EUETS has not had a material effect on the Company's results to date, however, should the regulators significantly restrict the number of Emissions Allowances available, it could have a material effect in the future.

        In North America, the U.S. and Canada are engaged in significant legislative and regulatory activity relating to CO2 emissions, both at the federal and the state and provincial levels of government. There are numerous proposals pending before the U.S. Congress which would create a cap-and-trade emissions trading scheme for CO2, but no legislation has been adopted into law. Other proposals would adopt a national carbon tax or would create restrictions on CO2 emissions without utilizing a cap-and-trade system. The U.S. Environmental Protection Agency has recently commenced a regulatory process for CO2, but no specific scheme affecting manufacturing facilities has been detailed.

        In Asia Pacific, Australia's ratification of the Kyoto Protocol came into effect in March 2008. In July 2008, the Australian Federal Government issued the Carbon Pollution Reduction Scheme ("CPRS") Green Paper aimed to help reduce the country's carbon emissions. The CPRS recommended an emissions trading scheme ("ETS") be established in Australia in 2010, however this has not yet occurred. Also in Australia, the National Greenhouse and Energy Reporting Act 2007 commenced on July 1, 2008. This act establishes a mandatory reporting system for corporate greenhouse gas emissions and energy production and consumption. Key features of this act include the following: (1) reporting of greenhouse gas emissions, energy consumption and production by large corporations, subject to independent audit; (2) public disclosure of corporate level greenhouse gas emissions and energy information; and (3) consistent and comparable data available for government, in particular, the development and administration of the CPRS. In New Zealand, the government made a number of amendments to the emissions trading scheme passed into law in September 2008. One of the changes introduced a transition phase to the scheme between July 1, 2010 and December 31, 2012. During this period, participants are able to buy emission units from the government. The New Zealand scheme covers emissions covered by the Kyoto Protocol to which New Zealand is a signatory.

        The Company is unable to predict what environmental legal requirements may be adopted in the future. However, the Company continually monitors its operations in relation to environmental impacts and invests in environmentally friendly and emissions-reducing projects. As such, the Company has

6

---

Table of Contents

made significant expenditures for environmental improvements at certain of its factories over the last several years; however, these expenditures did not have a material adverse effect on the Company's results of operations or cash flows. The Company is unable to predict the impact of future environmental legal requirements on its results of operations or cash flows.

Intellectual Property Rights

        The Company has a large number of patents which relate to a wide variety of products and processes, has a substantial number of patent applications pending, and is licensed under several patents of others. While in the aggregate the Company's patents are of material importance to its businesses, the Company does not consider that any patent or group of patents relating to a particular product or process is of material importance when judged from the standpoint of any segment or its businesses as a whole. The Company has a number of intellectual property rights, comprised of both patented and proprietary technology, that the Company believes makes its glass forming machines more efficient and productive than those used by its competitors. In addition, the efficiency of the Company's glass forming machines is enhanced by the Company's overall approach to cost efficient manufacturing technology, which extends from the raw materials batch house to the finished goods warehouse. This technology is proprietary to the Company through a combination of issued patents, pending applications, copyrights, trade secrets and proprietary know-how.

        Upstream of the glass forming machines, there is technology to deliver molten glass to the forming machine at high rates of flow and fully conditioned to be homogeneous in consistency, viscosity and temperature for efficient forming into glass containers. The Company has proprietary know-how in (a) the batch house, where raw materials are stored, measured and mixed, (b) the furnace control system and furnace combustion, and (c) the forehearth and feeding system to deliver such homogeneous glass to the forming machines.

        In the Company's glass container manufacturing processes, computer controls and electro-mechanical mechanisms are commonly used for a wide variety of applications in the forming machines and auxiliary processes. Various patents held by the Company are directed to the electro-mechanical mechanisms and related technologies used to control sections of the machines. Additional U.S. patents held by the Company and various pending applications are directed to the technology used by the Company for the systems that control the operation of the forming machines and many of the component mechanisms that are embodied in the machine systems.

        Downstream of the glass forming machines, there is patented and unpatented technology for ware handling, annealing, coating and inspection, which further enhances the overall efficiency of the manufacturing process.

        While the above patents and intellectual property rights are representative of the technology used in the Company's glass manufacturing operations, there are numerous other pending patent applications, trade secrets and other proprietary know-how and technology, as supplemented by administrative and operational best practices, which contribute to the Company's competitive advantage. As noted above, however, the Company does not consider that any patent or group of patents relating to a particular product or process is of material importance when judged from the standpoint of any segment or its businesses as a whole.

Seasonality

        Sales of particular glass container products such as beer and beverages are seasonal. Shipments in the U.S. and Europe are typically greater in the second and third quarters of the year, while shipments in the Asia Pacific region are typically greater in the first and fourth quarters of the year, and shipments in South America are typically greater in the third and fourth quarters of the year.

7

---

Table of Contents

Employees

        The Company's worldwide operations employed approximately 24,000 persons as of December 31, 2010. Approximately 76% of North American employees are hourly workers covered by collective bargaining agreements. The principal collective bargaining agreement, which at December 31, 2010, covered approximately 88% of the Company's union-affiliated employees in North America, will expire on March 31, 2011. Approximately 64% of employees in South America are unionized, although according to the labor legislation in each country, 100% of employees are covered by collective bargaining agreements. The average length of these agreements is approximately 3 years. In addition, a large number of the Company's employees are employed in countries in which employment laws provide greater bargaining or other rights to employees than the laws of the U.S. Such employment rights require the Company to work collaboratively with the legal representatives of the employees to effect any changes to labor arrangements. The Company considers its employee relations to be good and does not anticipate any material work stoppages in the near term.

Executive Officers of the Registrant

Financial Information about Foreign and Domestic Operations

        Information as to net sales, Segment Operating Profit, and assets of the Company's reportable segments is included in Note 19 to the Consolidated Financial Statements.

8

---

Table of Contents

ITEM 1A.    RISK FACTORS

Asbestos-Related Liability—The Company has made, and will continue to make, substantial payments to resolve claims of persons alleging exposure to asbestos-containing products and may need to record additional charges in the future for estimated asbestos-related costs. These substantial payments have affected and may continue to affect the Company's cost of borrowing and the ability to pursue acquisitions.

        The Company is a defendant in numerous lawsuits alleging bodily injury and death as a result of exposure to asbestos dust. From 1948 to 1958, one of the Company's former business units commercially produced and sold approximately $40 million of a high-temperature, calcium-silicate based pipe and block insulation material containing asbestos. The Company exited the pipe and block insulation business in April 1958. The typical asbestos personal injury lawsuit alleges various theories of liability, including negligence, gross negligence and strict liability and seek compensatory, and in some cases, punitive damages, in various amounts (herein referred to as "asbestos claims").

        The Company believes that its ultimate asbestos-related liability (i.e., its indemnity payments or other claim disposition costs plus related legal fees) cannot reasonably be estimated. Beginning with the initial liability of $975 million established in 1993, the Company has accrued a total of approximately $3.82 billion through 2010, before insurance recoveries, for its asbestos-related liability. The Company's ability to reasonably estimate its liability has been significantly affected by, among other factors, the volatility of asbestos-related litigation in the United States, the significant number of co-defendants that have filed for bankruptcy, the magnitude and timing of co-defendant bankruptcy trust payments, the inherent uncertainty of future disease incidence and claiming patterns, the expanding list of non-traditional defendants that have been sued in this litigation, and the use of mass litigation screenings to generate large numbers of claims by parties who allege exposure to asbestos dust but have no present physical asbestos impairment.

        The Company conducted a comprehensive review of its asbestos-related liabilities and costs in connection with finalizing and reporting its results of operations for the year ended December 31, 2010 and concluded that an increase in its accrual for future asbestos-related costs in the amount of $170 million (pretax and after tax) was required.

        The ultimate amount of distributions that may be required to fund the Company's asbestos-related payments cannot reasonably be estimated. The Company's reported results of operations for 2010 were materially affected by the $170 million (pretax and after tax) fourth quarter charge and asbestos-related payments continue to be substantial. Any future additional charge may likewise materially affect the Company's results of operations for the period in which it is recorded. Also, the continued use of significant amounts of cash for asbestos-related costs has affected and may continue to affect the Company's cost of borrowing and its ability to pursue global or domestic acquisitions.

Substantial Leverage—The Company's indebtedness could adversely affect the Company's financial health.

        The Company has a significant amount of debt. As of December 31, 2010, the Company had approximately $4.3 billion of total debt outstanding, an increase from $3.6 billion at December 31, 2009.

        The Company's indebtedness could result in the following consequences:

•

Increased vulnerability to general adverse economic and industry conditions;



•

Increased vulnerability to interest rate increases for the portion of the debt under the secured credit agreement;



•

Require the Company to dedicate a substantial portion of cash flow from operations to payments on indebtedness, thereby reducing the availability of cash flow to fund working capital, capital expenditures, acquisitions, development efforts and other general corporate purposes;

9

---

Table of Contents

•

Limited flexibility in planning for, or reacting to, changes in the Company's business and the rigid packaging market;



•

Place the Company at a competitive disadvantage relative to its competitors that have less debt; and



•

Limit, along with the financial and other restrictive covenants in the documents governing indebtedness, among other things, the Company's ability to borrow additional funds.

Ability to Service Debt—To service its indebtedness, the Company will require a significant amount of cash. The Company's ability to generate cash depends on many factors beyond its control.

        The Company's ability to make payments on and to refinance its indebtedness and to fund working capital, capital expenditures, acquisitions, development efforts and other general corporate purposes depends on its ability to generate cash in the future. The Company has no assurance that it will generate sufficient cash flow from operations, or that future borrowings will be available under the secured credit agreement, in an amount sufficient to enable the Company to pay its indebtedness, or to fund other liquidity needs. If short term interest rates increase, the Company's debt service cost will increase because some of its debt is subject to short term variable interest rates. At December 31, 2010, the Company's debt subject to variable interest rates represented approximately 22% of total debt. The Company's ratios of earnings to fixed charges were 2.6x and 1.9x for the years ended December 31, 2010 and 2009, respectively.

        The Company may need to refinance all or a portion of its indebtedness on or before maturity. If the Company is unable to generate sufficient cash flow and is unable to refinance or extend outstanding borrowings on commercially reasonable terms or at all, it may have to take one or more of the following actions:

•

Reduce or delay capital expenditures planned for replacements, improvements and expansions;



•

Sell assets;



•

Restructure debt; and/or



•

Obtain additional debt or equity financing.

        The Company can provide no assurance that it could effect or implement any of these alternatives on satisfactory terms, if at all.

Debt Restrictions—The Company may not be able to finance future needs or adapt its business plans to changes because of restrictions placed on it by the secured credit agreement and the indentures and instruments governing other indebtedness.

        The secured credit agreement, the indentures governing the senior debentures and notes, and certain of the agreements governing other indebtedness contain affirmative and negative covenants that limit the ability of the Company to take certain actions. For example, these indentures restrict, among other things, the ability of the Company and its restricted subsidiaries to borrow money, pay dividends on, or redeem or repurchase its stock, make investments, create liens, enter into certain transactions with affiliates and sell certain assets or merge with or into other companies. These restrictions could adversely affect the Company's ability to operate its businesses and may limit its ability to take advantage of potential business opportunities as they arise.

        Failure to comply with these or other covenants and restrictions contained in the secured credit agreement, the indentures or agreements governing other indebtedness could result in a default under those agreements, and the debt under those agreements, together with accrued interest, could then be declared immediately due and payable. If a default occurs under the secured credit agreement, the

10

---

Table of Contents

Company could no longer request borrowings under the agreement, and the lenders could cause all of the outstanding debt obligations under such secured credit agreement to become due and payable, which would result in a default under a number of other outstanding debt securities and could lead to an acceleration of obligations related to these debt securities. A default under the secured credit agreement, indentures or agreements governing other indebtedness could also lead to an acceleration of debt under other debt instruments that contain cross acceleration or cross-default provisions.

International Operations—The Company is subject to risks associated with operating in foreign countries.

        The Company operates manufacturing and other facilities throughout the world. Net sales from international operations totaled approximately $4.7 billion, representing approximately 71% of the Company's net sales for the year ended December 31, 2010. As a result of its international operations, the Company is subject to risks associated with operating in foreign countries, including:

•

Political, social and economic instability;



•

War, civil disturbance or acts of terrorism;



•

Taking of property by nationalization or expropriation without fair compensation;



•

Changes in government policies and regulations;



•

Devaluations and fluctuations in currency exchange rates;



•

Imposition of limitations on conversions of foreign currencies into dollars or remittance of dividends and other payments by foreign subsidiaries;



•

Imposition or increase of withholding and other taxes on remittances and other payments by foreign subsidiaries;



•

Hyperinflation in certain foreign countries;



•

Impositions or increase of investment and other restrictions or requirements by foreign governments;



•

Loss or non-renewal of treaties or other agreements with foreign tax authorities; and



•

Changes in tax laws, or the interpretation thereof, affecting foreign tax credits or tax deductions relating to our non-U.S. earnings or operations.

        The risks associated with operating in foreign countries may have a material adverse effect on operations.

Competition—The Company faces intense competition from other glass container producers, as well as from makers of alternative forms of packaging. Competitive pressures could adversely affect the Company's financial health.

        The Company is subject to significant competition from other glass container producers, as well as from makers of alternative forms of packaging, such as aluminum cans and plastic containers. The Company competes with each rigid packaging competitor on the basis of price, quality, service and the marketing attributes of the container. Advantages or disadvantages in any of these competitive factors may be sufficient to cause the customer to consider changing suppliers and/or using an alternative form of packaging. The adverse effects of consumer purchasing decisions may be more significant in periods of economic downturn and may lead to longer term reductions in consumer spending on glass packaged products. The Company also competes with manufacturers of non-rigid packaging alternatives, including flexible pouches and aseptic cartons, in serving the packaging needs of certain end-use markets, including juice customers.

11

---

Table of Contents

        Pressures from competitors and producers of alternative forms of packaging have resulted in excess capacity in certain countries in the past and have led to capacity adjustments and significant pricing pressures in the rigid packaging market.

High Energy Costs—Higher energy costs worldwide and interrupted power supplies may have a material adverse effect on operations.

        Electrical power, natural gas, and fuel oil are vital to the Company's operations as it relies on a continuous power supply to conduct its business. Depending on the location and mix of energy sources, energy accounts for 15% to 25% of total production costs. Substantial increases and volatility in energy costs could cause the Company to experience a significant increase in operating costs, which may have a material adverse effect on operations.

Business Integration Risks—The Company may not be able to effectively integrate additional businesses it acquires in the future.

        The Company may consider strategic transactions, including acquisitions that will complement, strengthen and enhance growth in its worldwide glass operations. The Company evaluates opportunities on a preliminary basis from time to time, but these transactions may not advance beyond the preliminary stages or be completed. Such acquisitions are subject to various risks and uncertainties, including:

•

The inability to integrate effectively the operations, products, technologies and personnel of the acquired companies (some of which are located in diverse geographic regions) and achieve expected synergies;



•

The potential disruption of existing business and diversion of management's attention from day-to-day operations;



•

The inability to maintain uniform standards, controls, procedures and policies;



•

The need or obligation to divest portions of the acquired companies;



•

The potential impairment of relationships with customers;



•

The potential failure to identify material problems and liabilities during due diligence review of acquisition targets;



•

The potential failure to obtain sufficient indemnification rights to fully offset possible liabilities associated with acquired businesses; and



•

The challenges associated with operating in new geographic regions.

        In addition, the Company cannot make assurances that the integration and consolidation of newly acquired businesses will achieve any anticipated cost savings and operating synergies.

Customer Consolidation—The continuing consolidation of the Company's customer base may intensify pricing pressures and have a material adverse effect on operations.

        Since the early 1990s, many of the Company's largest customers have acquired companies with similar or complementary product lines. This consolidation has increased the concentration of the Company's business with its largest customers. In many cases, such consolidation has been accompanied by pressure from customers for lower prices, reflecting the increase in the total volume of products purchased or the elimination of a price differential between the acquiring customer and the company acquired. Increased pricing pressures from the Company's customers may have a material adverse effect on operations.

Seasonality and Raw Materials—Profitability could be affected by varied seasonal demands and the availability of raw materials.

        Due principally to the seasonal nature of the consumption of beer and other beverages, for which demand is stronger during the summer months, sales of the Company's products have varied and are expected to vary by quarter. Shipments in the U.S. and Europe are typically greater in the second and third quarters of the year, while shipments in the Asia Pacific region are typically greater in the first and fourth quarters of the year, and shipments in South America are typically greater in the third and fourth quarters of the year. Unseasonably cool weather during peak demand periods can reduce demand for certain beverages packaged in the Company's containers.

12

---

Table of Contents

        The raw materials that the Company uses have historically been available in adequate supply from multiple sources. For certain raw materials, however, there may be temporary shortages due to weather or other factors, including disruptions in supply caused by raw material transportation or production delays. These shortages, as well as material volatility in the cost of any of the principal raw materials that the Company uses, may have a material adverse effect on operations.

Environmental Risks—The Company is subject to various environmental legal requirements and may be subject to new legal requirements in the future. These requirements may have a material adverse effect on operations.

        The Company's operations and properties, both in the U.S. and abroad, are subject to extensive laws, ordinances, regulations and other legal requirements relating to environmental protection, including legal requirements governing investigation and clean-up of contaminated properties as well as water discharges, air emissions, waste management and workplace health and safety. Such legal requirements frequently change and vary among jurisdictions. The Company's operations and properties, both in the U.S. and abroad, must comply with these legal requirements. These requirements may have a material adverse effect on operations.

        The Company has incurred, and expects to incur, costs for its operations to comply with environmental legal requirements, and these costs could increase in the future. Many environmental legal requirements provide for substantial fines, orders (including orders to cease operations), and criminal sanctions for violations. These legal requirements may apply to conditions at properties that the Company presently or formerly owned or operated, as well as at other properties for which the Company may be responsible, including those at which wastes attributable to the Company were disposed. A significant order or judgment against the Company, the loss of a significant permit or license or the imposition of a significant fine may have a material adverse effect on operations.

        A number of governmental authorities both in the U.S. and abroad have enacted, or are considering, legal requirements that would mandate certain rates of recycling, the use of recycled materials and/or limitations on certain kinds of packaging materials. In addition, some companies with packaging needs have responded to such developments and/or perceived environmental concerns of consumers by using containers made in whole or in part of recycled materials. Such developments may reduce the demand for some of the Company's products and/or increase the Company's costs, which may have a material adverse effect on operations.

Labor Relations—Some of the Company's employees are unionized or represented by workers' councils.

        The Company is party to a number of collective bargaining agreements with labor unions which at December 31, 2010, covered approximately 76% of the Company's employees in North America. Approximately 64% of employees in South America are unionized, although according to the labor legislation of each country, 100% of employees are covered by collective bargaining agreements. The agreement covering substantially all of the Company's union-affiliated employees in its U.S. glass container operations expires on March 31, 2011. Agreements in South America typically have an average term of approximately 3 years. Upon the expiration of any collective bargaining agreement, if the Company is unable to negotiate acceptable contracts with labor unions, it could result in strikes by the affected workers and increased operating costs as a result of higher wages or benefits paid to union members. In addition, a large number of the Company's employees are employed in countries in which employment laws provide greater bargaining or other rights to employees than the laws of the U.S. Such employment rights require the Company to work collaboratively with the legal representatives of the employees to effect any changes to labor arrangements. For example, most of the Company's employees in Europe are represented by workers' councils that must approve any changes in conditions of employment, including salaries and benefits and staff changes, and may impede efforts to restructure the Company's workforce. Although the Company believes that it has a good working relationship with

13

---

Table of Contents

its employees, if the Company's employees were to engage in a strike or other work stoppage, the Company could experience a significant disruption of operations and/or higher ongoing labor costs, which may have a material adverse effect on operations.

Accounting—The Company's financial results are based upon estimates and assumptions that may differ from actual results.

        In preparing the Company's consolidated financial statements in accordance with U.S. generally accepted accounting principles, several estimates and assumptions are made that affect the accounting for and recognition of assets, liabilities, revenues and expenses. These estimates and assumptions must be made because certain information that is used in the preparation of the Company's financial statements is dependent on future events, cannot be calculated with a high degree of precision from data available or is not capable of being readily calculated based on generally accepted methodologies. In some cases, these estimates are particularly difficult to determine and the Company must exercise significant judgment. The Company believes that accounting for long-lived assets, pension benefit plans, contingencies and litigation, and income taxes involves the more significant judgments and estimates used in the preparation of its consolidated financial statements. Actual results for all estimates could differ materially from the estimates and assumptions that the Company uses, which could have a material adverse effect on the Company's financial condition and results of operations.

Accounting Standards—The adoption of new accounting standards or interpretations could adversely impact the Company's financial results.

        The Company's implementation of and compliance with changes in accounting rules and interpretations could adversely affect its operating results or cause unanticipated fluctuations in its results in future periods. The accounting rules and regulations that the Company must comply with are complex and continually changing. Recent actions and public comments from the SEC have focused on the integrity of financial reporting generally. The Financial Accounting Standards Board has recently introduced several new or proposed accounting standards, or is developing new proposed standards, which would represent a significant change from current industry practices. In addition, many companies' accounting policies are being subjected to heightened scrutiny by regulators and the public. While the Company believes that its financial statements have been prepared in accordance with U.S. generally accepted accounting principles, the Company cannot predict the impact of future changes to accounting principles or its accounting policies on its financial statements going forward.

Goodwill—A significant write down of goodwill would have a material adverse effect on the Company's reported results of operations and net worth.

        Goodwill at December 31, 2010 totaled $2.8 billion. The Company evaluates goodwill annually (or more frequently if impairment indicators arise) for impairment using the required business valuation methods. These methods include the use of a weighted average cost of capital to calculate the present value of the expected future cash flows of the Company's reporting units. Future changes in the cost of capital, expected cash flows, or other factors may cause the Company's goodwill to be impaired, resulting in a non-cash charge against results of operations to write down goodwill for the amount of the impairment. If a significant write down is required, the charge would have a material adverse effect on the Company's reported results of operations and net worth.

14

---

Table of Contents

Pension Funding—Declines in the fair value of the assets of the pension plans sponsored by the Company could require increased funding.

        The Company's defined benefit pension plans in the U.S. and several other countries are funded through qualified trusts that hold investments in a broad range of equity and debt securities. Deterioration in the value of such investments, or reductions driven by a decline in securities markets or otherwise, could increase the underfunded status of the Company's funded pension plans, thereby increasing its obligation to make contributions to the plans as required by the laws and regulations governing each plan. An obligation to make contributions to pension plans could reduce the cash available for working capital and other corporate uses, and may have an adverse impact on the Company's operations, financial condition and liquidity.

ITEM 1B.    UNRESOLVED STAFF COMMENTS

        None.

ITEM 2.    PROPERTIES

        The principal manufacturing facilities and other material important physical properties of the Company at December 31, 2010 are listed below. All properties are glass container plants and are owned in fee, except where otherwise noted.

15

---

Table of Contents

16

---

Table of Contents

        The Company believes that its facilities are well maintained and currently adequate for its planned production requirements over the next three to five years.

ITEM 3.    LEGAL PROCEEDINGS

        For further information on legal proceedings, see Note 18 to the Consolidated Financial Statements and the section entitled "Environmental and Other Governmental Regulation" in Item 1.

ITEM 4.    RESERVED

17

---

Table of Contents

PART II

ITEM 5.    MARKET FOR REGISTRANT'S COMMON STOCK AND RELATED SHARE OWNER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

        The price range for the Company's common stock on the New York Stock Exchange, as reported by the Financial Industry Regulatory Authority, Inc., was as follows:

        The number of share owners of record on December 31, 2010 was 1,410. Approximately 91% of the outstanding shares were registered in the name of Depository Trust Company, or CEDE, which held such shares on behalf of a number of brokerage firms, banks, and other financial institutions. The shares attributed to these financial institutions, in turn, represented the interests of more than 45,000 unidentified beneficial owners. No dividends have been declared or paid since the Company's initial public offering in December 1991 and the Company does not anticipate paying any dividends in the near future. For restrictions on payment of dividends on common stock, see Management's Discussion and Analysis of Financial Condition and Results of Operations—Capital Resources and Liquidity—Current and Long-Term Debt and Note 6 to the Consolidated Financial Statements.

        Information with respect to securities authorized for issuance under equity compensation plans is included herein under Item 12.

        During 2010, the Company purchased 6 million shares of its common stock for $199 million pursuant to authorization by its Board of Directors in September 2008 to purchase up to $350 million of the Company's common stock.

18

---

Table of Contents

PERFORMANCE GRAPH
COMPARISON OF CUMULATIVE TOTAL RETURN
AMONG OWENS-ILLINOIS, S&P 500, AND PACKAGING GROUP

        The above graph compares the performance of the Company's Common Stock with that of a broad market index (the S&P 500 Composite Index) and a packaging group consisting of companies with lines of business or product end uses comparable to those of the Company for which market quotations are available.

        The packaging group consists of: AptarGroup, Inc., Ball Corp., Bemis Company, Inc., Crown Holdings, Inc., Graham Packaging Company Inc., Owens-Illinois, Inc., Sealed Air Corp., Silgan Holdings Inc., and Sonoco Products Co. Graham Packaging Company Inc. was added to the packaging group because market quotations for its stock are now available following its initial public offering in 2010. Vitro Sociedad Anonima was removed from the packaging group due to its bankruptcy proceedings.

        The comparison of total return on investment for each period is based on the investment of $100 on December 31, 2005 and the change in market value of the stock, including additional shares assumed purchased through reinvestment of dividends, if any.

19

---

Table of Contents

ITEM 6.    SELECTED FINANCIAL DATA

        The selected consolidated financial data presented below relates to each of the five years in the period ended December 31, 2010. The financial data for each of the five years in the period ended December 31, 2010 was derived from the audited consolidated financial statements of the Company. The results of the Company's Venezuelan operations have been reclassified to discontinued operations as a result of the expropriation of those operations in 2010. For more information, see the "Consolidated Financial Statements" included elsewhere in this document.

20

---

Table of Contents

---

(a)

Amounts related to the Company's plastic packaging business have been reclassified to discontinued operations for 2006 and 2007 as a result of the sale of that business in 2007.

Amounts related to the Company's Venezuelan operations have been reclassified to discontinued operations for 2006 - 2010 as a result of the expropriation of those operations in 2010.

(b)

Amount for 2010 includes charges of $12 million ($7 million after tax amount attributable to the Company) for acquisition-related fair value inventory adjustments.

Amount for 2006 includes a loss of $9 million ($8 million after tax amount attributable to the Company) from the mark to market effect of natural gas hedge contracts.

(c)

Amount for 2010 includes charges of $170 million (pretax and after tax) to increase the accrual for estimated future asbestos-related costs, $13 million ($11 million after tax amount attributable to the Company) for restructuring and asset impairments, and $20 million (pretax and after tax amount attributable to the Company) for acquisition-related restructuring, transaction and financing costs.

Amount for 2009 includes charges of $180 million (pretax and after tax) to increase the accrual for estimated future asbestos-related costs, $207 million ($180 million after tax amount attributable to the Company) for restructuring and asset impairments, and $18 million ($17 million after tax amount attributable to the Company) for the remeasurement of certain bolivar-denominated assets and liabilities held outside of Venezuela.

Amount for 2008 includes charges of $250 million ($249 million after tax) to increase the accrual for estimated future asbestos-related costs and $133 million ($110 million after tax amount attributable to the Company) for restructuring and asset impairments.

Amount for 2007 includes charges of $115 million (pretax and after tax) to increase the accrual for estimated future asbestos-related costs and $100 million ($84 million after tax amount attributable to the Company) for restructuring and asset impairments.

Amount for 2006 includes charges of $120 million (pretax and after tax) to increase the accrual for estimated future asbestos-related costs, a charge of $21 million (pretax and after tax attributable to

the Company) for CEO transition costs, and a charge of $30 million (pretax and after tax amount attributable to the Company) for the closing of the Godfrey, Illinois machine parts manufacturing operation.

(d)

Other revenue in 2006 includes a gain of $16 million ($11 million after tax amount attributable to the Company) for the curtailment of postretirement benefits in The Netherlands.

(e)

Amount for 2010 includes charges of $6 million (pretax and after tax amount attributable to the Company) for note repurchase premiums. In addition, the Company recorded a reduction of interest expense of $9 million (pretax and after tax amount attributable to the Company) to recognize the unamortized proceeds from terminated interest rate swaps.

Amount for 2009 includes charges of $5 million (pretax and after tax amount attributable to the Company) for note repurchase premiums, net of a gain from the termination of interest rate swap agreements on the notes.

Amount for 2007 includes charges of $8 million ($7 million after tax amount attributable to the Company) for note repurchase premiums.

Amount for 2006 includes charges of $6 million (pretax and after tax amount attributable to the Company) for note repurchase premiums.

Includes additional interest charges for the write-off of unamortized deferred financing fees related to the early extinguishment of debt as follows: $3 million (pretax and after tax amount attributable to the Company) for 2010; $2 million (pretax and after tax amount attributable to the Company) for 2007; and $11 million (pretax and after tax amount attributable to the Company) for 2006.

(f)

Amount for 2010 includes a net tax benefit of $24 million related to the reversal of deferred tax valuation allowances and a non-cash tax benefit transferred from other income categories of $8 million.

Amount for 2009 includes a non-cash tax benefit transferred from other income categories of $48 million.

Amount for 2008 includes a net tax expense of $33 million ($35 million attributable to the Company) related to tax legislation, restructuring, and other.

Amount for 2007 includes a benefit of $14 million for the recognition of tax credits related to restructuring of investments in certain European operations.

Amount for 2006 includes a benefit of $6 million from the reversal of a non-U.S. deferred tax asset valuation allowance partially offset by charges related to international tax restructuring.

(g)

The Company defines free cash flow as cash provided by continuing operating activities less additions to property, plant, and equipment from continuing operations. Free cash flow does not conform to U.S. GAAP and should not be construed as an alternative to the cash flow measures reported in accordance with U.S. GAAP. The Company uses free cash flow for internal reporting, forecasting and budgeting and believes this information allows the board of directors, management, investors and analysts to better understand the Company's financial performance. Free cash flow is calculated as follows (dollar amounts in millions):